Sascha Hauer | 15ea70f | 2008-03-26 20:40:49 +0100 | [diff] [blame] | 1 | /* |
| 2 | * i2c driver for Freescale mx31 |
| 3 | * |
| 4 | * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> |
| 5 | * |
| 6 | * See file CREDITS for list of people who contributed to this |
| 7 | * project. |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or |
| 10 | * modify it under the terms of the GNU General Public License as |
| 11 | * published by the Free Software Foundation; either version 2 of |
| 12 | * the License, or (at your option) any later version. |
| 13 | * |
| 14 | * This program is distributed in the hope that it will be useful, |
| 15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 | * GNU General Public License for more details. |
| 18 | * |
| 19 | * You should have received a copy of the GNU General Public License |
| 20 | * along with this program; if not, write to the Free Software |
| 21 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| 22 | * MA 02111-1307 USA |
| 23 | */ |
| 24 | |
| 25 | #include <common.h> |
| 26 | |
Michal Simek | 76b8a13 | 2008-07-14 19:45:35 +0200 | [diff] [blame] | 27 | #if defined(CONFIG_HARD_I2C) |
Sascha Hauer | 15ea70f | 2008-03-26 20:40:49 +0100 | [diff] [blame] | 28 | |
| 29 | #include <asm/arch/mx31.h> |
| 30 | #include <asm/arch/mx31-regs.h> |
| 31 | |
| 32 | #define IADR 0x00 |
| 33 | #define IFDR 0x04 |
| 34 | #define I2CR 0x08 |
| 35 | #define I2SR 0x0c |
| 36 | #define I2DR 0x10 |
| 37 | |
| 38 | #define I2CR_IEN (1 << 7) |
| 39 | #define I2CR_IIEN (1 << 6) |
| 40 | #define I2CR_MSTA (1 << 5) |
| 41 | #define I2CR_MTX (1 << 4) |
| 42 | #define I2CR_TX_NO_AK (1 << 3) |
| 43 | #define I2CR_RSTA (1 << 2) |
| 44 | |
| 45 | #define I2SR_ICF (1 << 7) |
| 46 | #define I2SR_IBB (1 << 5) |
| 47 | #define I2SR_IIF (1 << 1) |
| 48 | #define I2SR_RX_NO_AK (1 << 0) |
| 49 | |
| 50 | #ifdef CFG_I2C_MX31_PORT1 |
| 51 | #define I2C_BASE 0x43f80000 |
| 52 | #elif defined (CFG_I2C_MX31_PORT2) |
| 53 | #define I2C_BASE 0x43f98000 |
| 54 | #elif defined (CFG_I2C_MX31_PORT3) |
| 55 | #define I2C_BASE 0x43f84000 |
| 56 | #else |
| 57 | #error "define CFG_I2C_MX31_PORTx to use the mx31 I2C driver" |
| 58 | #endif |
| 59 | |
| 60 | #ifdef DEBUG |
| 61 | #define DPRINTF(args...) printf(args) |
| 62 | #else |
| 63 | #define DPRINTF(args...) |
| 64 | #endif |
| 65 | |
| 66 | static u16 div[] = { 30, 32, 36, 42, 48, 52, 60, 72, 80, 88, 104, 128, 144, |
| 67 | 160, 192, 240, 288, 320, 384, 480, 576, 640, 768, 960, |
| 68 | 1152, 1280, 1536, 1920, 2304, 2560, 3072, 3840}; |
| 69 | |
| 70 | void i2c_init(int speed, int unused) |
| 71 | { |
| 72 | int freq = mx31_get_ipg_clk(); |
| 73 | int i; |
| 74 | |
| 75 | for (i = 0; i < 0x1f; i++) |
| 76 | if (freq / div[i] <= speed) |
| 77 | break; |
| 78 | |
| 79 | DPRINTF("%s: speed: %d\n",__FUNCTION__, speed); |
| 80 | |
| 81 | __REG16(I2C_BASE + I2CR) = 0; /* Reset module */ |
| 82 | __REG16(I2C_BASE + IFDR) = i; |
| 83 | __REG16(I2C_BASE + I2CR) = I2CR_IEN; |
| 84 | __REG16(I2C_BASE + I2SR) = 0; |
| 85 | } |
| 86 | |
| 87 | static int wait_busy(void) |
| 88 | { |
| 89 | int timeout = 10000; |
| 90 | |
| 91 | while (!(__REG16(I2C_BASE + I2SR) & I2SR_IIF) && --timeout) |
| 92 | udelay(1); |
| 93 | __REG16(I2C_BASE + I2SR) = 0; /* clear interrupt */ |
| 94 | |
| 95 | return timeout; |
| 96 | } |
| 97 | |
| 98 | static int tx_byte(u8 byte) |
| 99 | { |
| 100 | __REG16(I2C_BASE + I2DR) = byte; |
| 101 | |
| 102 | if (!wait_busy() || __REG16(I2C_BASE + I2SR) & I2SR_RX_NO_AK) |
| 103 | return -1; |
| 104 | return 0; |
| 105 | } |
| 106 | |
| 107 | static int rx_byte(void) |
| 108 | { |
| 109 | if (!wait_busy()) |
| 110 | return -1; |
| 111 | |
| 112 | return __REG16(I2C_BASE + I2DR); |
| 113 | } |
| 114 | |
| 115 | int i2c_probe(uchar chip) |
| 116 | { |
| 117 | int ret; |
| 118 | |
| 119 | __REG16(I2C_BASE + I2CR) = 0; /* Reset module */ |
| 120 | __REG16(I2C_BASE + I2CR) = I2CR_IEN; |
| 121 | |
| 122 | __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | I2CR_MTX; |
| 123 | ret = tx_byte(chip << 1); |
| 124 | __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MTX; |
| 125 | |
| 126 | return ret; |
| 127 | } |
| 128 | |
| 129 | static int i2c_addr(uchar chip, uint addr, int alen) |
| 130 | { |
| 131 | __REG16(I2C_BASE + I2SR) = 0; /* clear interrupt */ |
| 132 | __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | I2CR_MTX; |
| 133 | |
| 134 | if (tx_byte(chip << 1)) |
| 135 | return -1; |
| 136 | |
| 137 | while (alen--) |
| 138 | if (tx_byte((addr >> (alen * 8)) & 0xff)) |
| 139 | return -1; |
| 140 | return 0; |
| 141 | } |
| 142 | |
| 143 | int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len) |
| 144 | { |
| 145 | int timeout = 10000; |
| 146 | int ret; |
| 147 | |
| 148 | DPRINTF("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n",__FUNCTION__, chip, addr, alen, len); |
| 149 | |
| 150 | if (i2c_addr(chip, addr, alen)) { |
| 151 | printf("i2c_addr failed\n"); |
| 152 | return -1; |
| 153 | } |
| 154 | |
| 155 | __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | I2CR_MTX | I2CR_RSTA; |
| 156 | |
| 157 | if (tx_byte(chip << 1 | 1)) |
| 158 | return -1; |
| 159 | |
| 160 | __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | ((len == 1) ? I2CR_TX_NO_AK : 0); |
| 161 | |
| 162 | ret = __REG16(I2C_BASE + I2DR); |
| 163 | |
| 164 | while (len--) { |
| 165 | if ((ret = rx_byte()) < 0) |
| 166 | return -1; |
| 167 | *buf++ = ret; |
| 168 | if (len <= 1) |
| 169 | __REG16(I2C_BASE + I2CR) = I2CR_IEN | I2CR_MSTA | I2CR_TX_NO_AK; |
| 170 | } |
| 171 | |
| 172 | wait_busy(); |
| 173 | |
| 174 | __REG16(I2C_BASE + I2CR) = I2CR_IEN; |
| 175 | |
| 176 | while (__REG16(I2C_BASE + I2SR) & I2SR_IBB && --timeout) |
| 177 | udelay(1); |
| 178 | |
| 179 | return 0; |
| 180 | } |
| 181 | |
| 182 | int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len) |
| 183 | { |
| 184 | int timeout = 10000; |
| 185 | DPRINTF("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n",__FUNCTION__, chip, addr, alen, len); |
| 186 | |
| 187 | if (i2c_addr(chip, addr, alen)) |
| 188 | return -1; |
| 189 | |
| 190 | while (len--) |
| 191 | if (tx_byte(*buf++)) |
| 192 | return -1; |
| 193 | |
| 194 | __REG16(I2C_BASE + I2CR) = I2CR_IEN; |
| 195 | |
| 196 | while (__REG16(I2C_BASE + I2SR) & I2SR_IBB && --timeout) |
| 197 | udelay(1); |
| 198 | |
| 199 | return 0; |
| 200 | } |
| 201 | |
| 202 | #endif /* CONFIG_HARD_I2C */ |