Stefan Roese | fdf21b1 | 2007-03-21 13:39:57 +0100 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2007 |
| 3 | * Stefan Roese, DENX Software Engineering, sr@denx.de. |
| 4 | * |
Wolfgang Denk | d79de1d | 2013-07-08 09:37:19 +0200 | [diff] [blame] | 5 | * SPDX-License-Identifier: GPL-2.0+ |
Stefan Roese | fdf21b1 | 2007-03-21 13:39:57 +0100 | [diff] [blame] | 6 | */ |
| 7 | |
| 8 | #include <common.h> |
| 9 | #include <asm/processor.h> |
Stefan Roese | 247e9d7 | 2010-09-09 19:18:00 +0200 | [diff] [blame] | 10 | #include <asm/ppc405.h> |
Stefan Roese | fdf21b1 | 2007-03-21 13:39:57 +0100 | [diff] [blame] | 11 | |
| 12 | /* test-only: move into cpu directory!!! */ |
| 13 | |
| 14 | #if defined(PLLMR0_200_133_66) |
| 15 | void board_pll_init_f(void) |
| 16 | { |
| 17 | /* |
| 18 | * set PLL clocks based on input sysclk is 33M |
| 19 | * |
| 20 | * ---------------------------------- |
| 21 | * | CLK | FREQ (MHz) | DIV RATIO | |
| 22 | * ---------------------------------- |
| 23 | * | CPU | 200.0 | 4 (0x02)| |
| 24 | * | PLB | 133.3 | 6 (0x06)| |
| 25 | * | OPB | 66.6 | 12 (0x0C)| |
| 26 | * | EBC | 66.6 | 12 (0x0C)| |
| 27 | * | SPI | 66.6 | 12 (0x0C)| |
| 28 | * | UART0 | 10.0 | 40 (0x28)| |
| 29 | * | UART1 | 10.0 | 40 (0x28)| |
| 30 | * | DAC | 2.0 | 200 (0xC8)| |
| 31 | * | ADC | 2.0 | 200 (0xC8)| |
| 32 | * | PWM | 100.0 | 4 (0x04)| |
| 33 | * | EMAC | 25.0 | 16 (0x10)| |
| 34 | * ----------------------------------- |
| 35 | */ |
| 36 | |
| 37 | /* Initialize PLL */ |
Stefan Roese | 918010a | 2009-09-09 16:25:29 +0200 | [diff] [blame] | 38 | mtcpr(CPR0_PLLC, 0x0000033c); |
| 39 | mtcpr(CPR0_PLLD, 0x0c010200); |
Stefan Roese | 8cb251a | 2010-09-12 06:21:37 +0200 | [diff] [blame] | 40 | mtcpr(CPR0_PRIMAD, 0x04060c0c); |
| 41 | mtcpr(CPR0_PERD0, 0x000c0000); /* SPI clk div. eq. OPB clk div. */ |
| 42 | mtcpr(CPR0_CLKUPD, 0x40000000); |
Stefan Roese | fdf21b1 | 2007-03-21 13:39:57 +0100 | [diff] [blame] | 43 | } |
| 44 | |
| 45 | #elif defined(PLLMR0_266_160_80) |
| 46 | |
| 47 | void board_pll_init_f(void) |
| 48 | { |
| 49 | /* |
| 50 | * set PLL clocks based on input sysclk is 33M |
| 51 | * |
| 52 | * ---------------------------------- |
| 53 | * | CLK | FREQ (MHz) | DIV RATIO | |
| 54 | * ---------------------------------- |
| 55 | * | CPU | 266.64 | 3 | |
| 56 | * | PLB | 159.98 | 5 (0x05)| |
| 57 | * | OPB | 79.99 | 10 (0x0A)| |
| 58 | * | EBC | 79.99 | 10 (0x0A)| |
| 59 | * | SPI | 79.99 | 10 (0x0A)| |
| 60 | * | UART0 | 28.57 | 7 (0x07)| |
| 61 | * | UART1 | 28.57 | 7 (0x07)| |
| 62 | * | DAC | 28.57 | 7 (0xA7)| |
Stefan Roese | f6c7b76 | 2007-03-24 15:45:34 +0100 | [diff] [blame] | 63 | * | ADC | 4 | 50 (0x32)| |
Stefan Roese | fdf21b1 | 2007-03-21 13:39:57 +0100 | [diff] [blame] | 64 | * | PWM | 28.57 | 7 (0x07)| |
| 65 | * | EMAC | 4 | 50 (0x32)| |
| 66 | * ----------------------------------- |
| 67 | */ |
| 68 | |
| 69 | /* Initialize PLL */ |
Stefan Roese | 918010a | 2009-09-09 16:25:29 +0200 | [diff] [blame] | 70 | mtcpr(CPR0_PLLC, 0x20000238); |
| 71 | mtcpr(CPR0_PLLD, 0x03010400); |
Stefan Roese | 8cb251a | 2010-09-12 06:21:37 +0200 | [diff] [blame] | 72 | mtcpr(CPR0_PRIMAD, 0x03050a0a); |
| 73 | mtcpr(CPR0_PERC0, 0x00000000); |
| 74 | mtcpr(CPR0_PERD0, 0x070a0707); /* SPI clk div. eq. OPB clk div. */ |
| 75 | mtcpr(CPR0_PERD1, 0x07323200); |
Stefan Roese | 918010a | 2009-09-09 16:25:29 +0200 | [diff] [blame] | 76 | mtcpr(CPR0_CLKUP, 0x40000000); |
Stefan Roese | fdf21b1 | 2007-03-21 13:39:57 +0100 | [diff] [blame] | 77 | } |
| 78 | |
| 79 | #elif defined(PLLMR0_333_166_83) |
| 80 | |
| 81 | void board_pll_init_f(void) |
| 82 | { |
| 83 | /* |
| 84 | * set PLL clocks based on input sysclk is 33M |
| 85 | * |
| 86 | * ---------------------------------- |
| 87 | * | CLK | FREQ (MHz) | DIV RATIO | |
| 88 | * ---------------------------------- |
| 89 | * | CPU | 333.33 | 2 | |
| 90 | * | PLB | 166.66 | 4 (0x04)| |
| 91 | * | OPB | 83.33 | 8 (0x08)| |
| 92 | * | EBC | 83.33 | 8 (0x08)| |
| 93 | * | SPI | 83.33 | 8 (0x08)| |
| 94 | * | UART0 | 16.66 | 5 (0x05)| |
| 95 | * | UART1 | 16.66 | 5 (0x05)| |
| 96 | * | DAC | ???? | 166 (0xA6)| |
| 97 | * | ADC | ???? | 166 (0xA6)| |
| 98 | * | PWM | 41.66 | 3 (0x03)| |
| 99 | * | EMAC | ???? | 3 (0x03)| |
| 100 | * ----------------------------------- |
| 101 | */ |
| 102 | |
| 103 | /* Initialize PLL */ |
Stefan Roese | 918010a | 2009-09-09 16:25:29 +0200 | [diff] [blame] | 104 | mtcpr(CPR0_PLLC, 0x0000033C); |
| 105 | mtcpr(CPR0_PLLD, 0x0a010000); |
Stefan Roese | 8cb251a | 2010-09-12 06:21:37 +0200 | [diff] [blame] | 106 | mtcpr(CPR0_PRIMAD, 0x02040808); |
| 107 | mtcpr(CPR0_PERD0, 0x02080505); /* SPI clk div. eq. OPB clk div. */ |
| 108 | mtcpr(CPR0_PERD1, 0xA6A60300); |
Stefan Roese | 918010a | 2009-09-09 16:25:29 +0200 | [diff] [blame] | 109 | mtcpr(CPR0_CLKUP, 0x40000000); |
Stefan Roese | fdf21b1 | 2007-03-21 13:39:57 +0100 | [diff] [blame] | 110 | } |
| 111 | |
| 112 | #elif defined(PLLMR0_100_100_12) |
| 113 | |
| 114 | void board_pll_init_f(void) |
| 115 | { |
| 116 | /* |
| 117 | * set PLL clocks based on input sysclk is 33M |
| 118 | * |
| 119 | * ---------------------- |
| 120 | * | CLK | FREQ (MHz) | |
| 121 | * ---------------------- |
| 122 | * | CPU | 100.00 | |
| 123 | * | PLB | 100.00 | |
| 124 | * | OPB | 12.00 | |
| 125 | * | EBC | 49.00 | |
| 126 | * ---------------------- |
| 127 | */ |
| 128 | |
| 129 | /* Initialize PLL */ |
Stefan Roese | 918010a | 2009-09-09 16:25:29 +0200 | [diff] [blame] | 130 | mtcpr(CPR0_PLLC, 0x000003BC); |
| 131 | mtcpr(CPR0_PLLD, 0x06060600); |
Stefan Roese | 8cb251a | 2010-09-12 06:21:37 +0200 | [diff] [blame] | 132 | mtcpr(CPR0_PRIMAD, 0x02020004); |
| 133 | mtcpr(CPR0_PERD0, 0x04002828); /* SPI clk div. eq. OPB clk div. */ |
| 134 | mtcpr(CPR0_PERD1, 0xC8C81600); |
Stefan Roese | 918010a | 2009-09-09 16:25:29 +0200 | [diff] [blame] | 135 | mtcpr(CPR0_CLKUP, 0x40000000); |
Stefan Roese | fdf21b1 | 2007-03-21 13:39:57 +0100 | [diff] [blame] | 136 | } |
Stefan Roese | f6c7b76 | 2007-03-24 15:45:34 +0100 | [diff] [blame] | 137 | #endif /* CPU_<speed>_405EZ */ |