| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| 2 | /* |
| 3 | * Copyright (c) 2014 Protonic Holland |
| 4 | */ |
| 5 | |
| 6 | #include <dt-bindings/gpio/gpio.h> |
| 7 | #include <dt-bindings/input/input.h> |
| 8 | |
| 9 | / { |
| 10 | chosen { |
| 11 | stdout-path = &uart4; |
| 12 | }; |
| 13 | |
| 14 | reg_3v3: regulator-3v3 { |
| 15 | compatible = "regulator-fixed"; |
| 16 | regulator-name = "3v3"; |
| 17 | regulator-min-microvolt = <3300000>; |
| 18 | regulator-max-microvolt = <3300000>; |
| 19 | }; |
| 20 | |
| 21 | reg_usb_h1_vbus: regulator-h1-vbus { |
| 22 | compatible = "regulator-fixed"; |
| 23 | regulator-name = "h1-vbus"; |
| 24 | regulator-min-microvolt = <5000000>; |
| 25 | regulator-max-microvolt = <5000000>; |
| 26 | }; |
| 27 | |
| 28 | reg_usb_otg_vbus: regulator-otg-vbus { |
| 29 | compatible = "regulator-fixed"; |
| 30 | regulator-name = "otg-vbus"; |
| 31 | regulator-min-microvolt = <5000000>; |
| 32 | regulator-max-microvolt = <5000000>; |
| 33 | gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; |
| 34 | enable-active-high; |
| 35 | }; |
| 36 | }; |
| 37 | |
| 38 | &can1 { |
| 39 | pinctrl-names = "default"; |
| 40 | status = "okay"; |
| 41 | }; |
| 42 | |
| 43 | &i2c1 { |
| 44 | clock-frequency = <100000>; |
| 45 | pinctrl-names = "default"; |
| 46 | pinctrl-0 = <&pinctrl_i2c1>; |
| 47 | status = "okay"; |
| 48 | }; |
| 49 | |
| 50 | &i2c3 { |
| 51 | clock-frequency = <100000>; |
| 52 | pinctrl-names = "default"; |
| 53 | pinctrl-0 = <&pinctrl_i2c3>; |
| 54 | status = "okay"; |
| 55 | |
| 56 | temperature-sensor@70 { |
| 57 | compatible = "ti,tmp103"; |
| 58 | reg = <0x70>; |
| 59 | }; |
| 60 | }; |
| 61 | |
| 62 | &uart4 { |
| 63 | pinctrl-names = "default"; |
| 64 | pinctrl-0 = <&pinctrl_uart4>; |
| 65 | status = "okay"; |
| 66 | }; |
| 67 | |
| 68 | &usbh1 { |
| 69 | vbus-supply = <®_usb_h1_vbus>; |
| 70 | phy_type = "utmi"; |
| 71 | dr_mode = "host"; |
| 72 | disable-over-current; |
| 73 | status = "okay"; |
| 74 | }; |
| 75 | |
| 76 | &usbotg { |
| 77 | vbus-supply = <®_usb_otg_vbus>; |
| 78 | pinctrl-names = "default"; |
| 79 | pinctrl-0 = <&pinctrl_usbotg>; |
| 80 | phy_type = "utmi"; |
| 81 | dr_mode = "host"; |
| 82 | over-current-active-low; |
| 83 | status = "okay"; |
| 84 | }; |
| 85 | |
| 86 | &usbphynop1 { |
| 87 | status = "disabled"; |
| 88 | }; |
| 89 | |
| 90 | &usbphynop2 { |
| 91 | status = "disabled"; |
| 92 | }; |
| 93 | |
| 94 | &usdhc1 { |
| 95 | pinctrl-names = "default"; |
| 96 | pinctrl-0 = <&pinctrl_usdhc1>; |
| 97 | cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; |
| 98 | status = "okay"; |
| 99 | }; |
| 100 | |
| 101 | &usdhc3 { |
| 102 | pinctrl-names = "default"; |
| 103 | pinctrl-0 = <&pinctrl_usdhc3>; |
| 104 | bus-width = <8>; |
| 105 | non-removable; |
| 106 | no-1-8-v; |
| 107 | no-sd; |
| 108 | no-sdio; |
| 109 | status = "okay"; |
| 110 | }; |
| 111 | |
| 112 | &iomuxc { |
| 113 | pinctrl_can1: can1grp { |
| 114 | fsl,pins = < |
| 115 | MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b008 |
| 116 | MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b008 |
| 117 | >; |
| 118 | }; |
| 119 | |
| 120 | pinctrl_i2c1: i2c1grp { |
| 121 | fsl,pins = < |
| 122 | MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 |
| 123 | MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 |
| 124 | >; |
| 125 | }; |
| 126 | |
| 127 | pinctrl_i2c3: i2c3grp { |
| 128 | fsl,pins = < |
| 129 | MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 |
| 130 | MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 |
| 131 | >; |
| 132 | }; |
| 133 | |
| 134 | pinctrl_uart4: uart4grp { |
| 135 | fsl,pins = < |
| 136 | MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 |
| 137 | MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 |
| 138 | >; |
| 139 | }; |
| 140 | |
| 141 | pinctrl_usdhc1: usdhc1grp { |
| 142 | fsl,pins = < |
| 143 | MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 |
| 144 | MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 |
| 145 | MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 |
| 146 | MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 |
| 147 | MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 |
| 148 | MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 |
| 149 | MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0 |
| 150 | >; |
| 151 | }; |
| 152 | |
| 153 | pinctrl_usdhc3: usdhc3grp { |
| 154 | fsl,pins = < |
| 155 | MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 |
| 156 | MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 |
| 157 | MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 |
| 158 | MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 |
| 159 | MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 |
| 160 | MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 |
| 161 | MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 |
| 162 | MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 |
| 163 | MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 |
| 164 | MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 |
| 165 | MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 |
| 166 | >; |
| 167 | }; |
| 168 | |
| 169 | pinctrl_usbotg: usbotggrp { |
| 170 | fsl,pins = < |
| 171 | MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 |
| 172 | MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 |
| 173 | >; |
| 174 | }; |
| 175 | }; |