Stephan Linz | fc77d51 | 2012-07-29 00:25:35 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Xilinx SPI driver |
| 3 | * |
| 4 | * XPS/AXI bus interface |
| 5 | * |
| 6 | * based on bfin_spi.c, by way of altera_spi.c |
| 7 | * Copyright (c) 2005-2008 Analog Devices Inc. |
| 8 | * Copyright (c) 2010 Thomas Chou <thomas@wytron.com.tw> |
| 9 | * Copyright (c) 2010 Graeme Smecher <graeme.smecher@mail.mcgill.ca> |
| 10 | * Copyright (c) 2012 Stephan Linz <linz@li-pro.net> |
| 11 | * |
Jagannadha Sutradharudu Teki | d92799e | 2013-10-14 13:31:24 +0530 | [diff] [blame] | 12 | * SPDX-License-Identifier: GPL-2.0+ |
Stephan Linz | fc77d51 | 2012-07-29 00:25:35 +0200 | [diff] [blame] | 13 | * |
| 14 | * [0]: http://www.xilinx.com/support/documentation |
| 15 | * |
| 16 | * [S]: [0]/ip_documentation/xps_spi.pdf |
| 17 | * [0]/ip_documentation/axi_spi_ds742.pdf |
| 18 | */ |
| 19 | #ifndef _XILINX_SPI_ |
| 20 | #define _XILINX_SPI_ |
| 21 | |
| 22 | #include <asm/types.h> |
| 23 | #include <asm/io.h> |
| 24 | |
| 25 | /* |
| 26 | * Xilinx SPI Register Definition |
| 27 | * |
| 28 | * [1]: [0]/ip_documentation/xps_spi.pdf |
| 29 | * page 8, Register Descriptions |
| 30 | * [2]: [0]/ip_documentation/axi_spi_ds742.pdf |
| 31 | * page 7, Register Overview Table |
| 32 | */ |
| 33 | struct xilinx_spi_reg { |
| 34 | u32 __space0__[7]; |
| 35 | u32 dgier; /* Device Global Interrupt Enable Register (DGIER) */ |
| 36 | u32 ipisr; /* IP Interrupt Status Register (IPISR) */ |
| 37 | u32 __space1__; |
| 38 | u32 ipier; /* IP Interrupt Enable Register (IPIER) */ |
| 39 | u32 __space2__[5]; |
| 40 | u32 srr; /* Softare Reset Register (SRR) */ |
| 41 | u32 __space3__[7]; |
| 42 | u32 spicr; /* SPI Control Register (SPICR) */ |
| 43 | u32 spisr; /* SPI Status Register (SPISR) */ |
| 44 | u32 spidtr; /* SPI Data Transmit Register (SPIDTR) */ |
| 45 | u32 spidrr; /* SPI Data Receive Register (SPIDRR) */ |
| 46 | u32 spissr; /* SPI Slave Select Register (SPISSR) */ |
| 47 | u32 spitfor; /* SPI Transmit FIFO Occupancy Register (SPITFOR) */ |
| 48 | u32 spirfor; /* SPI Receive FIFO Occupancy Register (SPIRFOR) */ |
| 49 | }; |
| 50 | |
| 51 | /* Device Global Interrupt Enable Register (dgier), [1] p15, [2] p15 */ |
| 52 | #define DGIER_GIE (1 << 31) |
| 53 | |
| 54 | /* IP Interrupt Status Register (ipisr), [1] p15, [2] p15 */ |
| 55 | #define IPISR_DRR_NOT_EMPTY (1 << 8) |
| 56 | #define IPISR_SLAVE_SELECT (1 << 7) |
| 57 | #define IPISR_TXF_HALF_EMPTY (1 << 6) |
| 58 | #define IPISR_DRR_OVERRUN (1 << 5) |
| 59 | #define IPISR_DRR_FULL (1 << 4) |
| 60 | #define IPISR_DTR_UNDERRUN (1 << 3) |
| 61 | #define IPISR_DTR_EMPTY (1 << 2) |
| 62 | #define IPISR_SLAVE_MODF (1 << 1) |
| 63 | #define IPISR_MODF (1 << 0) |
| 64 | |
| 65 | /* IP Interrupt Enable Register (ipier), [1] p17, [2] p18 */ |
| 66 | #define IPIER_DRR_NOT_EMPTY (1 << 8) |
| 67 | #define IPIER_SLAVE_SELECT (1 << 7) |
| 68 | #define IPIER_TXF_HALF_EMPTY (1 << 6) |
| 69 | #define IPIER_DRR_OVERRUN (1 << 5) |
| 70 | #define IPIER_DRR_FULL (1 << 4) |
| 71 | #define IPIER_DTR_UNDERRUN (1 << 3) |
| 72 | #define IPIER_DTR_EMPTY (1 << 2) |
| 73 | #define IPIER_SLAVE_MODF (1 << 1) |
| 74 | #define IPIER_MODF (1 << 0) |
| 75 | |
| 76 | /* Softare Reset Register (srr), [1] p9, [2] p8 */ |
| 77 | #define SRR_RESET_CODE 0x0000000A |
| 78 | |
| 79 | /* SPI Control Register (spicr), [1] p9, [2] p8 */ |
| 80 | #define SPICR_LSB_FIRST (1 << 9) |
| 81 | #define SPICR_MASTER_INHIBIT (1 << 8) |
| 82 | #define SPICR_MANUAL_SS (1 << 7) |
| 83 | #define SPICR_RXFIFO_RESEST (1 << 6) |
| 84 | #define SPICR_TXFIFO_RESEST (1 << 5) |
| 85 | #define SPICR_CPHA (1 << 4) |
| 86 | #define SPICR_CPOL (1 << 3) |
| 87 | #define SPICR_MASTER_MODE (1 << 2) |
| 88 | #define SPICR_SPE (1 << 1) |
| 89 | #define SPICR_LOOP (1 << 0) |
| 90 | |
| 91 | /* SPI Status Register (spisr), [1] p11, [2] p10 */ |
| 92 | #define SPISR_SLAVE_MODE_SELECT (1 << 5) |
| 93 | #define SPISR_MODF (1 << 4) |
| 94 | #define SPISR_TX_FULL (1 << 3) |
| 95 | #define SPISR_TX_EMPTY (1 << 2) |
| 96 | #define SPISR_RX_FULL (1 << 1) |
| 97 | #define SPISR_RX_EMPTY (1 << 0) |
| 98 | |
| 99 | /* SPI Data Transmit Register (spidtr), [1] p12, [2] p12 */ |
| 100 | #define SPIDTR_8BIT_MASK (0xff << 0) |
| 101 | #define SPIDTR_16BIT_MASK (0xffff << 0) |
| 102 | #define SPIDTR_32BIT_MASK (0xffffffff << 0) |
| 103 | |
| 104 | /* SPI Data Receive Register (spidrr), [1] p12, [2] p12 */ |
| 105 | #define SPIDRR_8BIT_MASK (0xff << 0) |
| 106 | #define SPIDRR_16BIT_MASK (0xffff << 0) |
| 107 | #define SPIDRR_32BIT_MASK (0xffffffff << 0) |
| 108 | |
| 109 | /* SPI Slave Select Register (spissr), [1] p13, [2] p13 */ |
| 110 | #define SPISSR_MASK(cs) (1 << (cs)) |
| 111 | #define SPISSR_ACT(cs) ~SPISSR_MASK(cs) |
| 112 | #define SPISSR_OFF ~0UL |
| 113 | |
| 114 | /* SPI Transmit FIFO Occupancy Register (spitfor), [1] p13, [2] p14 */ |
| 115 | #define SPITFOR_OCYVAL_POS 0 |
| 116 | #define SPITFOR_OCYVAL_MASK (0xf << SPITFOR_OCYVAL_POS) |
| 117 | |
| 118 | /* SPI Receive FIFO Occupancy Register (spirfor), [1] p14, [2] p14 */ |
| 119 | #define SPIRFOR_OCYVAL_POS 0 |
| 120 | #define SPIRFOR_OCYVAL_MASK (0xf << SPIRFOR_OCYVAL_POS) |
| 121 | |
Jason Wu | 70b995c | 2012-11-23 15:05:08 +1000 | [diff] [blame] | 122 | /* SPI Software Reset Register (ssr) */ |
| 123 | #define SPISSR_RESET_VALUE 0x0a |
| 124 | |
Stephan Linz | fc77d51 | 2012-07-29 00:25:35 +0200 | [diff] [blame] | 125 | struct xilinx_spi_slave { |
| 126 | struct spi_slave slave; |
| 127 | struct xilinx_spi_reg *regs; |
| 128 | unsigned int freq; |
| 129 | unsigned int mode; |
| 130 | }; |
| 131 | |
| 132 | static inline struct xilinx_spi_slave *to_xilinx_spi_slave( |
| 133 | struct spi_slave *slave) |
| 134 | { |
| 135 | return container_of(slave, struct xilinx_spi_slave, slave); |
| 136 | } |
| 137 | |
| 138 | #endif /* _XILINX_SPI_ */ |