blob: fd1965d9f50bc084cd08554a07a5e250c743730d [file] [log] [blame]
Heiko Schocherdd68a1d2013-08-05 16:00:38 +02001/*
2 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
3 * Based on:
4 * U-Boot:board/davinci/da8xxevm/da850evm.c
5 *
6 * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
7 *
8 * Based on da830evm.c. Original Copyrights follow:
9 *
10 * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com>
11 * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
12 *
13 * SPDX-License-Identifier: GPL-2.0+
14 */
15
16#include <common.h>
17#include <i2c.h>
18#include <net.h>
19#include <netdev.h>
20#include <spi.h>
21#include <spi_flash.h>
22#include <asm/arch/hardware.h>
Khoronzhuk, Ivan753a00a2014-06-07 04:22:52 +030023#include <asm/ti-common/davinci_nand.h>
Heiko Schocherdd68a1d2013-08-05 16:00:38 +020024#include <asm/arch/emac_defs.h>
25#include <asm/arch/pinmux_defs.h>
26#include <asm/io.h>
27#include <asm/arch/davinci_misc.h>
Masahiro Yamada56a931c2016-09-21 11:28:55 +090028#include <linux/errno.h>
Heiko Schocherdd68a1d2013-08-05 16:00:38 +020029#include <asm/gpio.h>
30#include <hwconfig.h>
31#include <bootstage.h>
32
33DECLARE_GLOBAL_DATA_PTR;
34
35#ifdef CONFIG_DRIVER_TI_EMAC
36#ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII
37#define HAS_RMII 1
38#else
39#define HAS_RMII 0
40#endif
41#endif /* CONFIG_DRIVER_TI_EMAC */
42
43void dsp_lpsc_on(unsigned domain, unsigned int id)
44{
45 dv_reg_p mdstat, mdctl, ptstat, ptcmd;
46 struct davinci_psc_regs *psc_regs;
47
48 psc_regs = davinci_psc0_regs;
49 mdstat = &psc_regs->psc0.mdstat[id];
50 mdctl = &psc_regs->psc0.mdctl[id];
51 ptstat = &psc_regs->ptstat;
52 ptcmd = &psc_regs->ptcmd;
53
54 while (*ptstat & (0x1 << domain))
55 ;
56
57 if ((*mdstat & 0x1f) == 0x03)
58 return; /* Already on and enabled */
59
60 *mdctl |= 0x03;
61
62 *ptcmd = 0x1 << domain;
63
64 while (*ptstat & (0x1 << domain))
65 ;
66 while ((*mdstat & 0x1f) != 0x03)
67 ; /* Probably an overkill... */
68}
69
70static void dspwake(void)
71{
72 unsigned *resetvect = (unsigned *)DAVINCI_L3CBARAM_BASE;
73 u32 val;
74
75 /* if the device is ARM only, return */
76 if ((readl(CHIP_REV_ID_REG) & 0x3f) == 0x10)
77 return;
78
79 if (hwconfig_subarg_cmp_f("dsp", "wake", "no", NULL))
80 return;
81
82 *resetvect++ = 0x1E000; /* DSP Idle */
83 /* clear out the next 10 words as NOP */
84 memset(resetvect, 0, sizeof(unsigned) * 10);
85
86 /* setup the DSP reset vector */
87 writel(DAVINCI_L3CBARAM_BASE, HOST1CFG);
88
89 dsp_lpsc_on(1, DAVINCI_LPSC_GEM);
90 val = readl(PSC0_MDCTL + (15 * 4));
91 val |= 0x100;
92 writel(val, (PSC0_MDCTL + (15 * 4)));
93}
94
95int misc_init_r(void)
96{
97 dspwake();
98 return 0;
99}
100
101static const struct pinmux_config gpio_pins[] = {
102 /* GP7[14] selects bootmode*/
103 { pinmux(16), 8, 3 }, /* GP7[14] */
104};
105
106const struct pinmux_resource pinmuxes[] = {
107#ifdef CONFIG_DRIVER_TI_EMAC
108 PINMUX_ITEM(emac_pins_mdio),
109#ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII
110 PINMUX_ITEM(emac_pins_rmii),
111#else
112 PINMUX_ITEM(emac_pins_mii),
113#endif
114#endif
115 PINMUX_ITEM(uart2_pins_txrx),
116 PINMUX_ITEM(uart2_pins_rtscts),
117 PINMUX_ITEM(uart0_pins_txrx),
118 PINMUX_ITEM(uart0_pins_rtscts),
119#ifdef CONFIG_NAND_DAVINCI
120 PINMUX_ITEM(emifa_pins_cs3),
121 PINMUX_ITEM(emifa_pins_nand),
122#endif
123 PINMUX_ITEM(gpio_pins),
124};
125
126const int pinmuxes_size = ARRAY_SIZE(pinmuxes);
127
128const struct lpsc_resource lpsc[] = {
129 { DAVINCI_LPSC_AEMIF }, /* NAND, NOR */
130 { DAVINCI_LPSC_EMAC }, /* image download */
131 { DAVINCI_LPSC_UART2 }, /* console */
132 { DAVINCI_LPSC_UART0 }, /* console */
133 { DAVINCI_LPSC_GPIO },
134};
135
136const int lpsc_size = ARRAY_SIZE(lpsc);
137
138#ifndef CONFIG_DA850_EVM_MAX_CPU_CLK
139#define CONFIG_DA850_EVM_MAX_CPU_CLK 300000000
140#endif
141
142#define REV_AM18X_EVM 0x100
143
144/*
145 * get_board_rev() - setup to pass kernel board revision information
146 * Returns:
147 * bit[0-3] Maximum cpu clock rate supported by onboard SoC
148 * 0000b - 300 MHz
149 * 0001b - 372 MHz
150 * 0010b - 408 MHz
151 * 0011b - 456 MHz
152 */
153u32 get_board_rev(void)
154{
155 char *s;
156 u32 maxcpuclk = CONFIG_DA850_EVM_MAX_CPU_CLK;
157 u32 rev = 0;
158
159 s = getenv("maxcpuclk");
160 if (s)
161 maxcpuclk = simple_strtoul(s, NULL, 10);
162
163 if (maxcpuclk >= 456000000)
164 rev = 3;
165 else if (maxcpuclk >= 408000000)
166 rev = 2;
167 else if (maxcpuclk >= 372000000)
168 rev = 1;
169#ifdef CONFIG_DA850_AM18X_EVM
170 rev |= REV_AM18X_EVM;
171#endif
172 return rev;
173}
174
175int board_early_init_f(void)
176{
177 /*
178 * Power on required peripherals
179 * ARM does not have access by default to PSC0 and PSC1
180 * assuming here that the DSP bootloader has set the IOPU
181 * such that PSC access is available to ARM
182 */
183 if (da8xx_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc)))
184 return 1;
185
186 return 0;
187}
188
189int board_init(void)
190{
Heiko Schocherdd68a1d2013-08-05 16:00:38 +0200191 irq_init();
Heiko Schocherdd68a1d2013-08-05 16:00:38 +0200192
193 /* arch number of the board */
194 gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA850_EVM;
195
196 /* address of boot parameters */
197 gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
198
199 /* setup the SUSPSRC for ARM to control emulation suspend */
200 writel(readl(&davinci_syscfg_regs->suspsrc) &
201 ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C |
202 DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 |
203 DAVINCI_SYSCFG_SUSPSRC_UART0),
204 &davinci_syscfg_regs->suspsrc);
205
206 /* configure pinmux settings */
207 if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes)))
208 return 1;
209
210#ifdef CONFIG_DRIVER_TI_EMAC
211 davinci_emac_mii_mode_sel(HAS_RMII);
212#endif /* CONFIG_DRIVER_TI_EMAC */
213
214 /* enable the console UART */
215 writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
216 DAVINCI_UART_PWREMU_MGMT_UTRST),
217#if (CONFIG_SYS_NS16550_COM1 == DAVINCI_UART0_BASE)
218 &davinci_uart0_ctrl_regs->pwremu_mgmt);
219#else
220 &davinci_uart2_ctrl_regs->pwremu_mgmt);
221#endif
222 return 0;
223}
224
225#ifdef CONFIG_DRIVER_TI_EMAC
226/*
227 * Initializes on-board ethernet controllers.
228 */
229int board_eth_init(bd_t *bis)
230{
231 if (!davinci_emac_initialize()) {
232 printf("Error: Ethernet init failed!\n");
233 return -1;
234 }
235
236 return 0;
237}
238#endif /* CONFIG_DRIVER_TI_EMAC */
239
240static int init_led(int gpio, char *name, int val)
241{
242 int ret;
243
244 ret = gpio_request(gpio, name);
245 if (ret)
246 return -1;
247 ret = gpio_direction_output(gpio, val);
248 if (ret)
249 return -1;
250
251 return gpio;
252}
253
254#define LED_ON 0
255#define LED_OFF 1
256
257#if !defined(CONFIG_SPL_BUILD)
258#ifdef CONFIG_SHOW_BOOT_PROGRESS
259void show_boot_progress(int status)
260{
261 static int red;
262 static int green;
263
264 if (red == 0)
Heiko Schocher203f3912013-09-06 05:21:24 +0200265 red = init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_ON);
Heiko Schocherdd68a1d2013-08-05 16:00:38 +0200266 if (red != CONFIG_IPAM390_GPIO_LED_RED)
267 return;
268 if (green == 0)
269 green = init_led(CONFIG_IPAM390_GPIO_LED_GREEN, "green",
270 LED_OFF);
271 if (green != CONFIG_IPAM390_GPIO_LED_GREEN)
272 return;
273
274 switch (status) {
275 case BOOTSTAGE_ID_RUN_OS:
276 /*
277 * set normal state
Heiko Schocher203f3912013-09-06 05:21:24 +0200278 * LED Red : on
Heiko Schocherdd68a1d2013-08-05 16:00:38 +0200279 * LED green: off
280 */
Heiko Schocher203f3912013-09-06 05:21:24 +0200281 gpio_set_value(red, LED_ON);
Heiko Schocherdd68a1d2013-08-05 16:00:38 +0200282 gpio_set_value(green, LED_OFF);
283 break;
284 case BOOTSTAGE_ID_MAIN_LOOP:
285 /*
286 * U-Boot operation
287 * LED Red : on
288 * LED green: on
289 */
290 gpio_set_value(red, LED_ON);
291 gpio_set_value(green, LED_ON);
292 break;
293 }
294}
295#endif
296#endif
297
298#ifdef CONFIG_SPL_OS_BOOT
299int spl_start_uboot(void)
300{
301 int ret;
302 int bootmode = 0;
303
304 /*
305 * GP7[14] selects bootmode:
306 * 1: boot linux
307 * 0: boot u-boot
308 * if error accessing gpio boot U-Boot
309 *
310 * SPL bootmode
311 * 0: boot linux
312 * 1: boot u-boot
313 */
314 ret = gpio_request(CONFIG_IPAM390_GPIO_BOOTMODE , "bootmode");
315 if (ret)
316 bootmode = 1;
317 if (!bootmode) {
318 ret = gpio_direction_input(CONFIG_IPAM390_GPIO_BOOTMODE);
319 if (ret)
320 bootmode = 1;
321 }
322 if (!bootmode)
323 ret = gpio_get_value(CONFIG_IPAM390_GPIO_BOOTMODE);
324 if (!bootmode)
325 if (ret == 0)
326 bootmode = 1;
Heiko Schocher203f3912013-09-06 05:21:24 +0200327 /*
328 * LED red : on
329 * LED green: off
330 */
331 init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_ON);
332 init_led(CONFIG_IPAM390_GPIO_LED_GREEN, "green", LED_OFF);
Heiko Schocherdd68a1d2013-08-05 16:00:38 +0200333 return bootmode;
334}
335#endif