| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | /* |
| 3 | * Motion-PRO board Device Tree Source |
| 4 | * |
| 5 | * Copyright (C) 2007 Semihalf |
| 6 | * Marian Balakowicz <m8@semihalf.com> |
| 7 | */ |
| 8 | |
| 9 | /include/ "mpc5200b.dtsi" |
| 10 | |
| 11 | &gpt0 { fsl,has-wdt; }; |
| 12 | &gpt6 { // Motion-PRO status LED |
| 13 | compatible = "promess,motionpro-led"; |
| 14 | label = "motionpro-statusled"; |
| 15 | blink-delay = <100>; // 100 msec |
| 16 | }; |
| 17 | &gpt7 { // Motion-PRO ready LED |
| 18 | compatible = "promess,motionpro-led"; |
| 19 | label = "motionpro-readyled"; |
| 20 | }; |
| 21 | |
| 22 | / { |
| 23 | model = "promess,motionpro"; |
| 24 | compatible = "promess,motionpro"; |
| 25 | |
| 26 | soc5200@f0000000 { |
| 27 | can@900 { |
| 28 | status = "disabled"; |
| 29 | }; |
| 30 | |
| 31 | psc@2000 { // PSC1 |
| 32 | compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; |
| 33 | }; |
| 34 | |
| 35 | // PSC2 in spi master mode |
| 36 | psc@2200 { // PSC2 |
| 37 | compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; |
| 38 | cell-index = <1>; |
| 39 | }; |
| 40 | |
| 41 | psc@2400 { // PSC3 |
| 42 | status = "disabled"; |
| 43 | }; |
| 44 | |
| 45 | psc@2600 { // PSC4 |
| 46 | status = "disabled"; |
| 47 | }; |
| 48 | |
| 49 | psc@2800 { // PSC5 |
| 50 | compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; |
| 51 | }; |
| 52 | |
| 53 | psc@2c00 { // PSC6 |
| 54 | status = "disabled"; |
| 55 | }; |
| 56 | |
| 57 | ethernet@3000 { |
| 58 | phy-handle = <&phy0>; |
| 59 | }; |
| 60 | |
| 61 | mdio@3000 { |
| 62 | phy0: ethernet-phy@2 { |
| 63 | reg = <2>; |
| 64 | }; |
| 65 | }; |
| 66 | |
| 67 | i2c@3d00 { |
| 68 | status = "disabled"; |
| 69 | }; |
| 70 | |
| 71 | i2c@3d40 { |
| 72 | rtc@68 { |
| 73 | compatible = "dallas,ds1339"; |
| 74 | reg = <0x68>; |
| 75 | }; |
| 76 | }; |
| 77 | |
| 78 | sram@8000 { |
| 79 | compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; |
| 80 | reg = <0x8000 0x4000>; |
| 81 | }; |
| 82 | }; |
| 83 | |
| 84 | pci@f0000d00 { |
| 85 | status = "disabled"; |
| 86 | }; |
| 87 | |
| 88 | localbus { |
| 89 | ranges = <0 0 0xff000000 0x01000000 |
| 90 | 1 0 0x50000000 0x00010000 |
| 91 | 2 0 0x50010000 0x00010000 |
| 92 | 3 0 0x50020000 0x00010000>; |
| 93 | |
| 94 | // 8-bit DualPort SRAM on LocalPlus Bus CS1 |
| 95 | kollmorgen@1,0 { |
| 96 | compatible = "promess,motionpro-kollmorgen"; |
| 97 | reg = <1 0 0x10000>; |
| 98 | interrupts = <1 1 0>; |
| 99 | }; |
| 100 | |
| 101 | // 8-bit board CPLD on LocalPlus Bus CS2 |
| 102 | cpld@2,0 { |
| 103 | compatible = "promess,motionpro-cpld"; |
| 104 | reg = <2 0 0x10000>; |
| 105 | }; |
| 106 | |
| 107 | // 8-bit custom Anybus Module on LocalPlus Bus CS3 |
| 108 | anybus@3,0 { |
| 109 | compatible = "promess,motionpro-anybus"; |
| 110 | reg = <3 0 0x10000>; |
| 111 | }; |
| 112 | pro_module_general@3,0 { |
| 113 | compatible = "promess,pro_module_general"; |
| 114 | reg = <3 0 3>; |
| 115 | }; |
| 116 | pro_module_dio@3,800 { |
| 117 | compatible = "promess,pro_module_dio"; |
| 118 | reg = <3 0x800 2>; |
| 119 | }; |
| 120 | |
| 121 | // 16-bit flash device at LocalPlus Bus CS0 |
| 122 | flash@0,0 { |
| 123 | compatible = "cfi-flash"; |
| 124 | reg = <0 0 0x01000000>; |
| 125 | bank-width = <2>; |
| 126 | device-width = <2>; |
| 127 | #size-cells = <1>; |
| 128 | #address-cells = <1>; |
| 129 | }; |
| 130 | |
| 131 | }; |
| 132 | }; |