Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 53633a893a06bd5a0c807287d9cc29337806eaf7 / . / src / arm64 / ti / k3-j721e-common-proc-board.dts
blob: fe5207ac7d85d158ff8c95620e155955e16f02af [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame^]1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
4 *
5 * Product Link: https://www.ti.com/tool/J721EXCPXEVM
6 */
7
8/dts-v1/;
9
10#include "k3-j721e-som-p0.dtsi"
11#include <dt-bindings/gpio/gpio.h>
12#include <dt-bindings/input/input.h>
13#include <dt-bindings/net/ti-dp83867.h>
14#include <dt-bindings/phy/phy-cadence.h>
15
16/ {
17 compatible = "ti,j721e-evm", "ti,j721e";
18 model = "Texas Instruments J721e EVM";
19
20 aliases {
21 serial0 = &wkup_uart0;
22 serial1 = &mcu_uart0;
23 serial2 = &main_uart0;
24 serial3 = &main_uart1;
25 serial4 = &main_uart2;
26 serial6 = &main_uart4;
27 ethernet0 = &cpsw_port1;
28 mmc0 = &main_sdhci0;
29 mmc1 = &main_sdhci1;
30 };
31
32 chosen {
33 stdout-path = "serial2:115200n8";
34 };
35
36 gpio_keys: gpio-keys {
37 compatible = "gpio-keys";
38 autorepeat;
39 pinctrl-names = "default";
40 pinctrl-0 = <&sw10_button_pins_default>, <&sw11_button_pins_default>;
41
42 sw10: switch-10 {
43 label = "GPIO Key USER1";
44 linux,code = <BTN_0>;
45 gpios = <&main_gpio0 0 GPIO_ACTIVE_LOW>;
46 };
47
48 sw11: switch-11 {
49 label = "GPIO Key USER2";
50 linux,code = <BTN_1>;
51 gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>;
52 };
53 };
54
55 evm_12v0: fixedregulator-evm12v0 {
56 /* main supply */
57 compatible = "regulator-fixed";
58 regulator-name = "evm_12v0";
59 regulator-min-microvolt = <12000000>;
60 regulator-max-microvolt = <12000000>;
61 regulator-always-on;
62 regulator-boot-on;
63 };
64
65 vsys_3v3: fixedregulator-vsys3v3 {
66 /* Output of LMS140 */
67 compatible = "regulator-fixed";
68 regulator-name = "vsys_3v3";
69 regulator-min-microvolt = <3300000>;
70 regulator-max-microvolt = <3300000>;
71 vin-supply = <&evm_12v0>;
72 regulator-always-on;
73 regulator-boot-on;
74 };
75
76 vsys_5v0: fixedregulator-vsys5v0 {
77 /* Output of LM5140 */
78 compatible = "regulator-fixed";
79 regulator-name = "vsys_5v0";
80 regulator-min-microvolt = <5000000>;
81 regulator-max-microvolt = <5000000>;
82 vin-supply = <&evm_12v0>;
83 regulator-always-on;
84 regulator-boot-on;
85 };
86
87 vdd_mmc1: fixedregulator-sd {
88 compatible = "regulator-fixed";
89 regulator-name = "vdd_mmc1";
90 regulator-min-microvolt = <3300000>;
91 regulator-max-microvolt = <3300000>;
92 regulator-boot-on;
93 enable-active-high;
94 vin-supply = <&vsys_3v3>;
95 gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;
96 };
97
98 vdd_sd_dv_alt: gpio-regulator-TLV71033 {
99 compatible = "regulator-gpio";
100 pinctrl-names = "default";
101 pinctrl-0 = <&vdd_sd_dv_alt_pins_default>;
102 regulator-name = "tlv71033";
103 regulator-min-microvolt = <1800000>;
104 regulator-max-microvolt = <3300000>;
105 regulator-boot-on;
106 vin-supply = <&vsys_5v0>;
107 gpios = <&main_gpio0 117 GPIO_ACTIVE_HIGH>;
108 states = <1800000 0x0>,
109 <3300000 0x1>;
110 };
111
112 sound0: sound-0 {
113 compatible = "ti,j721e-cpb-audio";
114 model = "j721e-cpb";
115
116 ti,cpb-mcasp = <&mcasp10>;
117 ti,cpb-codec = <&pcm3168a_1>;
118
119 clocks = <&k3_clks 184 1>,
120 <&k3_clks 184 2>, <&k3_clks 184 4>,
121 <&k3_clks 157 371>,
122 <&k3_clks 157 400>, <&k3_clks 157 401>;
123 clock-names = "cpb-mcasp-auxclk",
124 "cpb-mcasp-auxclk-48000", "cpb-mcasp-auxclk-44100",
125 "cpb-codec-scki",
126 "cpb-codec-scki-48000", "cpb-codec-scki-44100";
127 };
128
129 transceiver1: can-phy0 {
130 compatible = "ti,tcan1043";
131 #phy-cells = <0>;
132 max-bitrate = <5000000>;
133 pinctrl-names = "default";
134 pinctrl-0 = <&mcu_mcan0_gpio_pins_default>;
135 standby-gpios = <&wkup_gpio0 54 GPIO_ACTIVE_LOW>;
136 enable-gpios = <&wkup_gpio0 0 GPIO_ACTIVE_HIGH>;
137 };
138
139 transceiver2: can-phy1 {
140 compatible = "ti,tcan1042";
141 #phy-cells = <0>;
142 max-bitrate = <5000000>;
143 pinctrl-names = "default";
144 pinctrl-0 = <&mcu_mcan1_gpio_pins_default>;
145 standby-gpios = <&wkup_gpio0 2 GPIO_ACTIVE_HIGH>;
146 };
147
148 transceiver3: can-phy2 {
149 compatible = "ti,tcan1043";
150 #phy-cells = <0>;
151 max-bitrate = <5000000>;
152 standby-gpios = <&exp2 7 GPIO_ACTIVE_LOW>;
153 enable-gpios = <&exp2 6 GPIO_ACTIVE_HIGH>;
154 };
155
156 transceiver4: can-phy3 {
157 compatible = "ti,tcan1042";
158 #phy-cells = <0>;
159 max-bitrate = <5000000>;
160 pinctrl-names = "default";
161 pinctrl-0 = <&main_mcan2_gpio_pins_default>;
162 standby-gpios = <&main_gpio0 127 GPIO_ACTIVE_HIGH>;
163 };
164
165 dp_pwr_3v3: regulator-dp-pwr {
166 compatible = "regulator-fixed";
167 regulator-name = "dp-pwr";
168 regulator-min-microvolt = <3300000>;
169 regulator-max-microvolt = <3300000>;
170 gpio = <&exp4 0 GPIO_ACTIVE_HIGH>; /* P0 - DP0_PWR_SW_EN */
171 enable-active-high;
172 };
173
174 dp0: connector {
175 compatible = "dp-connector";
176 label = "DP0";
177 type = "full-size";
178 dp-pwr-supply = <&dp_pwr_3v3>;
179
180 port {
181 dp_connector_in: endpoint {
182 remote-endpoint = <&dp0_out>;
183 };
184 };
185 };
186};
187
188&main_pmx0 {
189 main_uart0_pins_default: main-uart0-default-pins {
190 pinctrl-single,pins = <
191 J721E_IOPAD(0x1d4, PIN_INPUT, 1) /* (Y3) SPI1_CS0.UART0_CTSn */
192 J721E_IOPAD(0x1c0, PIN_OUTPUT, 1) /* (AA2) SPI0_CS0.UART0_RTSn */
193 J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */
194 J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */
195 >;
196 };
197
198 main_uart1_pins_default: main-uart1-default-pins {
199 pinctrl-single,pins = <
200 J721E_IOPAD(0x1f8, PIN_INPUT, 0) /* (AA4) UART1_RXD */
201 J721E_IOPAD(0x1fc, PIN_OUTPUT, 0) /* (AB4) UART1_TXD */
202 >;
203 };
204
205 main_uart2_pins_default: main-uart2-default-pins {
206 pinctrl-single,pins = <
207 J721E_IOPAD(0x1dc, PIN_INPUT, 3) /* (Y1) SPI1_CLK.UART2_RXD */
208 J721E_IOPAD(0x1e0, PIN_OUTPUT, 3) /* (Y5) SPI1_D0.UART2_TXD */
209 >;
210 };
211
212 main_uart4_pins_default: main-uart4-default-pins {
213 pinctrl-single,pins = <
214 J721E_IOPAD(0x190, PIN_INPUT, 1) /* (W23) RGMII6_TD3.UART4_RXD */
215 J721E_IOPAD(0x194, PIN_OUTPUT, 1) /* (W28) RGMII6_TD2.UART4_TXD */
216 >;
217 };
218
219 sw10_button_pins_default: sw10-button-default-pins {
220 pinctrl-single,pins = <
221 J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18) EXTINTn.GPIO0_0 */
222 >;
223 };
224
225 main_mmc1_pins_default: main-mmc1-default-pins {
226 pinctrl-single,pins = <
227 J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */
228 J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */
229 J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
230 J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */
231 J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
232 J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */
233 J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */
234 J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */
235 J721E_IOPAD(0x25c, PIN_INPUT, 0) /* (R28) MMC1_SDWP */
236 >;
237 };
238
239 vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-default-pins {
240 pinctrl-single,pins = <
241 J721E_IOPAD(0x1d8, PIN_INPUT, 7) /* (W4) SPI1_CS1.GPIO0_117 */
242 >;
243 };
244
245 main_usbss0_pins_default: main-usbss0-default-pins {
246 pinctrl-single,pins = <
247 J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */
248 J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */
249 >;
250 };
251
252 main_usbss1_pins_default: main-usbss1-default-pins {
253 pinctrl-single,pins = <
254 J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */
255 >;
256 };
257
258 dp0_pins_default: dp0-default-pins {
259 pinctrl-single,pins = <
260 J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */
261 >;
262 };
263
264 main_i2c1_exp4_pins_default: main-i2c1-exp4-default-pins {
265 pinctrl-single,pins = <
266 J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */
267 >;
268 };
269
270 main_i2c0_pins_default: main-i2c0-default-pins {
271 pinctrl-single,pins = <
272 J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */
273 J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */
274 >;
275 };
276
277 main_i2c1_pins_default: main-i2c1-default-pins {
278 pinctrl-single,pins = <
279 J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */
280 J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */
281 >;
282 };
283
284 main_i2c3_pins_default: main-i2c3-default-pins {
285 pinctrl-single,pins = <
286 J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */
287 J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */
288 >;
289 };
290
291 main_i2c6_pins_default: main-i2c6-default-pins {
292 pinctrl-single,pins = <
293 J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */
294 J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */
295 >;
296 };
297
298 mcasp10_pins_default: mcasp10-default-pins {
299 pinctrl-single,pins = <
300 J721E_IOPAD(0x158, PIN_OUTPUT_PULLDOWN, 12) /* (U23) RGMII5_TX_CTL.MCASP10_ACLKX */
301 J721E_IOPAD(0x15c, PIN_OUTPUT_PULLDOWN, 12) /* (U26) RGMII5_RX_CTL.MCASP10_AFSX */
302 J721E_IOPAD(0x160, PIN_OUTPUT_PULLDOWN, 12) /* (V28) RGMII5_TD3.MCASP10_AXR0 */
303 J721E_IOPAD(0x164, PIN_OUTPUT_PULLDOWN, 12) /* (V29) RGMII5_TD2.MCASP10_AXR1 */
304 J721E_IOPAD(0x170, PIN_OUTPUT_PULLDOWN, 12) /* (U29) RGMII5_TXC.MCASP10_AXR2 */
305 J721E_IOPAD(0x174, PIN_OUTPUT_PULLDOWN, 12) /* (U25) RGMII5_RXC.MCASP10_AXR3 */
306 J721E_IOPAD(0x198, PIN_INPUT_PULLDOWN, 12) /* (V25) RGMII6_TD1.MCASP10_AXR4 */
307 J721E_IOPAD(0x19c, PIN_INPUT_PULLDOWN, 12) /* (W27) RGMII6_TD0.MCASP10_AXR5 */
308 J721E_IOPAD(0x1a0, PIN_INPUT_PULLDOWN, 12) /* (W29) RGMII6_TXC.MCASP10_AXR6 */
309 >;
310 };
311
312 audi_ext_refclk2_pins_default: audi-ext-refclk2-default-pins {
313 pinctrl-single,pins = <
314 J721E_IOPAD(0x1a4, PIN_OUTPUT, 3) /* (W26) RGMII6_RXC.AUDIO_EXT_REFCLK2 */
315 >;
316 };
317
318 main_mcan0_pins_default: main-mcan0-default-pins {
319 pinctrl-single,pins = <
320 J721E_IOPAD(0x208, PIN_INPUT, 0) /* (W5) MCAN0_RX */
321 J721E_IOPAD(0x20c, PIN_OUTPUT, 0) /* (W6) MCAN0_TX */
322 >;
323 };
324
325 main_mcan2_pins_default: main-mcan2-default-pins {
326 pinctrl-single,pins = <
327 J721E_IOPAD(0x01f0, PIN_INPUT, 3) /* (AC2) MCAN2_RX.GPIO0_123 */
328 J721E_IOPAD(0x01f4, PIN_OUTPUT, 3) /* (AB1) MCAN2_TX.GPIO0_124 */
329 >;
330 };
331
332 main_mcan2_gpio_pins_default: main-mcan2-gpio-default-pins {
333 pinctrl-single,pins = <
334 J721E_IOPAD(0x200, PIN_INPUT, 7) /* (AC4) UART1_CTSn.GPIO0_127 */
335 >;
336 };
337};
338
339&wkup_pmx0 {
340 wkup_uart0_pins_default: wkup-uart0-default-pins {
341 pinctrl-single,pins = <
342 J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */
343 J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */
344 >;
345 };
346
347 mcu_uart0_pins_default: mcu-uart0-default-pins {
348 pinctrl-single,pins = <
349 J721E_WKUP_IOPAD(0xe8, PIN_INPUT, 0) /* (H29) WKUP_GPIO0_14.MCU_UART0_CTSn */
350 J721E_WKUP_IOPAD(0xec, PIN_OUTPUT, 0) /* (J27) WKUP_GPIO0_15.MCU_UART0_RTSn */
351 J721E_WKUP_IOPAD(0xe4, PIN_INPUT, 0) /* (H28) WKUP_GPIO0_13.MCU_UART0_RXD */
352 J721E_WKUP_IOPAD(0xe0, PIN_OUTPUT, 0) /* (G29) WKUP_GPIO0_12.MCU_UART0_TXD */
353 >;
354 };
355
356 sw11_button_pins_default: sw11-button-default-pins {
357 pinctrl-single,pins = <
358 J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */
359 >;
360 };
361
362 mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins {
363 pinctrl-single,pins = <
364 J721E_WKUP_IOPAD(0x34, PIN_OUTPUT, 0) /* (F22) MCU_OSPI1_CLK */
365 J721E_WKUP_IOPAD(0x50, PIN_OUTPUT, 0) /* (C22) MCU_OSPI1_CSn0 */
366 J721E_WKUP_IOPAD(0x40, PIN_INPUT, 0) /* (D22) MCU_OSPI1_D0 */
367 J721E_WKUP_IOPAD(0x44, PIN_INPUT, 0) /* (G22) MCU_OSPI1_D1 */
368 J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (D23) MCU_OSPI1_D2 */
369 J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 0) /* (C23) MCU_OSPI1_D3 */
370 J721E_WKUP_IOPAD(0x3c, PIN_INPUT, 0) /* (B23) MCU_OSPI1_DQS */
371 J721E_WKUP_IOPAD(0x38, PIN_INPUT, 0) /* (A23) MCU_OSPI1_LBCLKO */
372 >;
373 };
374
375 mcu_cpsw_pins_default: mcu-cpsw-default-pins {
376 pinctrl-single,pins = <
377 J721E_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
378 J721E_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
379 J721E_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */
380 J721E_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */
381 J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */
382 J721E_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */
383 J721E_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */
384 J721E_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
385 J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
386 J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
387 J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
388 J721E_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
389 >;
390 };
391
392 mcu_mdio_pins_default: mcu-mdio1-default-pins {
393 pinctrl-single,pins = <
394 J721E_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* MCU_MDIO0_MDC */
395 J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_MDIO0_MDIO */
396 >;
397 };
398
399 mcu_mcan0_pins_default: mcu-mcan0-default-pins {
400 pinctrl-single,pins = <
401 J721E_WKUP_IOPAD(0xac, PIN_INPUT, 0) /* (C29) MCU_MCAN0_RX */
402 J721E_WKUP_IOPAD(0xa8, PIN_OUTPUT, 0) /* (D29) MCU_MCAN0_TX */
403 >;
404 };
405
406 mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins {
407 pinctrl-single,pins = <
408 J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 7) /* (F26) WKUP_GPIO0_0 */
409 J721E_WKUP_IOPAD(0x98, PIN_INPUT, 7) /* (E28) MCU_SPI0_D1.WKUP_GPIO0_54 */
410 >;
411 };
412
413 mcu_mcan1_pins_default: mcu-mcan1-default-pins {
414 pinctrl-single,pins = <
415 J721E_WKUP_IOPAD(0xc4, PIN_INPUT, 0) /* (G24) WKUP_GPIO0_5.MCU_MCAN1_RX */
416 J721E_WKUP_IOPAD(0xc0, PIN_OUTPUT, 0) /* (G25) WKUP_GPIO0_4.MCU_MCAN1_TX */
417 >;
418 };
419
420 mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-default-pins {
421 pinctrl-single,pins = <
422 J721E_WKUP_IOPAD(0xb8, PIN_INPUT, 7) /* (F28) WKUP_GPIO0_2 */
423 >;
424 };
425
426 wkup_gpio_pins_default: wkup-gpio-default-pins {
427 pinctrl-single,pins = <
428 J721E_WKUP_IOPAD(0xd0, PIN_INPUT, 7) /* (C14) WKUP_GPIO0_8 */
429 >;
430 };
431};
432
433&wkup_uart0 {
434 /* Wakeup UART is used by System firmware */
435 status = "reserved";
436 pinctrl-names = "default";
437 pinctrl-0 = <&wkup_uart0_pins_default>;
438};
439
440&mcu_uart0 {
441 status = "okay";
442 pinctrl-names = "default";
443 pinctrl-0 = <&mcu_uart0_pins_default>;
444};
445
446&main_uart0 {
447 status = "okay";
448 pinctrl-names = "default";
449 pinctrl-0 = <&main_uart0_pins_default>;
450 /* Shared with ATF on this platform */
451 power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
452};
453
454&main_uart1 {
455 status = "okay";
456 pinctrl-names = "default";
457 pinctrl-0 = <&main_uart1_pins_default>;
458};
459
460&main_uart2 {
461 status = "okay";
462 pinctrl-names = "default";
463 pinctrl-0 = <&main_uart2_pins_default>;
464};
465
466&main_uart4 {
467 status = "okay";
468 pinctrl-names = "default";
469 pinctrl-0 = <&main_uart4_pins_default>;
470};
471
472&wkup_gpio0 {
473 status = "okay";
474 pinctrl-names = "default";
475 pinctrl-0 = <&wkup_gpio_pins_default>;
476};
477
478&main_gpio0 {
479 status = "okay";
480};
481
482&main_gpio1 {
483 status = "okay";
484};
485
486&main_sdhci0 {
487 /* eMMC */
488 status = "okay";
489 non-removable;
490 ti,driver-strength-ohm = <50>;
491 disable-wp;
492};
493
494&main_sdhci1 {
495 /* SD/MMC */
496 status = "okay";
497 vmmc-supply = <&vdd_mmc1>;
498 vqmmc-supply = <&vdd_sd_dv_alt>;
499 pinctrl-names = "default";
500 pinctrl-0 = <&main_mmc1_pins_default>;
501 ti,driver-strength-ohm = <50>;
502 disable-wp;
503};
504
505&usb_serdes_mux {
506 idle-states = <1>, <0>; /* USB0 to SERDES3, USB1 to SERDES1 */
507};
508
509&serdes_ln_ctrl {
510 idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_PCIE0_LANE1>,
511 <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
512 <J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>,
513 <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>,
514 <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
515 <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
516};
517
518&serdes_wiz3 {
519 typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_HIGH>;
520 typec-dir-debounce-ms = <700>; /* TUSB321, tCCB_DEFAULT 133 ms */
521};
522
523&serdes3 {
524 serdes3_usb_link: phy@0 {
525 reg = <0>;
526 cdns,num-lanes = <2>;
527 #phy-cells = <0>;
528 cdns,phy-type = <PHY_TYPE_USB3>;
529 resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>;
530 };
531};
532
533&usbss0 {
534 pinctrl-names = "default";
535 pinctrl-0 = <&main_usbss0_pins_default>;
536 ti,vbus-divider;
537};
538
539&usb0 {
540 dr_mode = "otg";
541 maximum-speed = "super-speed";
542 phys = <&serdes3_usb_link>;
543 phy-names = "cdns3,usb3-phy";
544};
545
546&usbss1 {
547 pinctrl-names = "default";
548 pinctrl-0 = <&main_usbss1_pins_default>;
549 ti,usb2-only;
550};
551
552&usb1 {
553 dr_mode = "host";
554 maximum-speed = "high-speed";
555};
556
557&ospi1 {
558 pinctrl-names = "default";
559 pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
560
561 flash@0 {
562 compatible = "jedec,spi-nor";
563 reg = <0x0>;
564 spi-tx-bus-width = <1>;
565 spi-rx-bus-width = <4>;
566 spi-max-frequency = <40000000>;
567 cdns,tshsl-ns = <60>;
568 cdns,tsd2d-ns = <60>;
569 cdns,tchsh-ns = <60>;
570 cdns,tslch-ns = <60>;
571 cdns,read-delay = <2>;
572
573 partitions {
574 compatible = "fixed-partitions";
575 #address-cells = <1>;
576 #size-cells = <1>;
577
578 partition@0 {
579 label = "qspi.tiboot3";
580 reg = <0x0 0x80000>;
581 };
582
583 partition@80000 {
584 label = "qspi.tispl";
585 reg = <0x80000 0x200000>;
586 };
587
588 partition@280000 {
589 label = "qspi.u-boot";
590 reg = <0x280000 0x400000>;
591 };
592
593 partition@680000 {
594 label = "qspi.env";
595 reg = <0x680000 0x20000>;
596 };
597
598 partition@6a0000 {
599 label = "qspi.env.backup";
600 reg = <0x6a0000 0x20000>;
601 };
602
603 partition@6c0000 {
604 label = "qspi.sysfw";
605 reg = <0x6c0000 0x100000>;
606 };
607
608 partition@800000 {
609 label = "qspi.rootfs";
610 reg = <0x800000 0x37c0000>;
611 };
612
613 partition@3fe0000 {
614 label = "qspi.phypattern";
615 reg = <0x3fe0000 0x20000>;
616 };
617 };
618 };
619};
620
621&tscadc0 {
622 status = "okay";
623 adc {
624 ti,adc-channels = <0 1 2 3 4 5 6 7>;
625 };
626};
627
628&tscadc1 {
629 status = "okay";
630 adc {
631 ti,adc-channels = <0 1 2 3 4 5 6 7>;
632 };
633};
634
635&main_i2c0 {
636 status = "okay";
637 pinctrl-names = "default";
638 pinctrl-0 = <&main_i2c0_pins_default>;
639 clock-frequency = <400000>;
640
641 exp1: gpio@20 {
642 compatible = "ti,tca6416";
643 reg = <0x20>;
644 gpio-controller;
645 #gpio-cells = <2>;
646 };
647
648 exp2: gpio@22 {
649 compatible = "ti,tca6424";
650 reg = <0x22>;
651 gpio-controller;
652 #gpio-cells = <2>;
653
654 p09-hog {
655 /* P11 - MCASP/TRACE_MUX_S0 */
656 gpio-hog;
657 gpios = <9 GPIO_ACTIVE_HIGH>;
658 output-low;
659 line-name = "MCASP/TRACE_MUX_S0";
660 };
661
662 p10-hog {
663 /* P12 - MCASP/TRACE_MUX_S1 */
664 gpio-hog;
665 gpios = <10 GPIO_ACTIVE_HIGH>;
666 output-high;
667 line-name = "MCASP/TRACE_MUX_S1";
668 };
669 };
670};
671
672&main_i2c1 {
673 status = "okay";
674 pinctrl-names = "default";
675 pinctrl-0 = <&main_i2c1_pins_default>;
676 clock-frequency = <400000>;
677
678 exp4: gpio@20 {
679 compatible = "ti,tca6408";
680 reg = <0x20>;
681 gpio-controller;
682 #gpio-cells = <2>;
683 pinctrl-names = "default";
684 pinctrl-0 = <&main_i2c1_exp4_pins_default>;
685 interrupt-parent = <&main_gpio1>;
686 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
687 interrupt-controller;
688 #interrupt-cells = <2>;
689 };
690};
691
692&k3_clks {
693 /* Confiure AUDIO_EXT_REFCLK2 pin as output */
694 pinctrl-names = "default";
695 pinctrl-0 = <&audi_ext_refclk2_pins_default>;
696};
697
698&main_i2c3 {
699 status = "okay";
700 pinctrl-names = "default";
701 pinctrl-0 = <&main_i2c3_pins_default>;
702 clock-frequency = <400000>;
703
704 exp3: gpio@20 {
705 compatible = "ti,tca6408";
706 reg = <0x20>;
707 gpio-controller;
708 #gpio-cells = <2>;
709 };
710
711 pcm3168a_1: audio-codec@44 {
712 compatible = "ti,pcm3168a";
713 reg = <0x44>;
714
715 #sound-dai-cells = <1>;
716
717 reset-gpios = <&exp3 0 GPIO_ACTIVE_LOW>;
718
719 /* C_AUDIO_REFCLK2 -> RGMII6_RXC (W26) */
720 clocks = <&k3_clks 157 371>;
721 clock-names = "scki";
722
723 /* HSDIV3_16FFT_MAIN_4_HSDIVOUT2_CLK -> REFCLK2 */
724 assigned-clocks = <&k3_clks 157 371>;
725 assigned-clock-parents = <&k3_clks 157 400>;
726 assigned-clock-rates = <24576000>; /* for 48KHz */
727
728 VDD1-supply = <&vsys_3v3>;
729 VDD2-supply = <&vsys_3v3>;
730 VCCAD1-supply = <&vsys_5v0>;
731 VCCAD2-supply = <&vsys_5v0>;
732 VCCDA1-supply = <&vsys_5v0>;
733 VCCDA2-supply = <&vsys_5v0>;
734 };
735};
736
737&main_i2c6 {
738 status = "okay";
739 pinctrl-names = "default";
740 pinctrl-0 = <&main_i2c6_pins_default>;
741 clock-frequency = <400000>;
742
743 exp5: gpio@20 {
744 compatible = "ti,tca6408";
745 reg = <0x20>;
746 gpio-controller;
747 #gpio-cells = <2>;
748 };
749};
750
751&mcu_cpsw {
752 pinctrl-names = "default";
753 pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
754};
755
756&davinci_mdio {
757 phy0: ethernet-phy@0 {
758 reg = <0>;
759 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
760 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
761 };
762};
763
764&cpsw_port1 {
765 phy-mode = "rgmii-rxid";
766 phy-handle = <&phy0>;
767};
768
769&dss {
770 /*
771 * These clock assignments are chosen to enable the following outputs:
772 *
773 * VP0 - DisplayPort SST
774 * VP1 - DPI0
775 * VP2 - DSI
776 * VP3 - DPI1
777 */
778
779 assigned-clocks = <&k3_clks 152 1>,
780 <&k3_clks 152 4>,
781 <&k3_clks 152 9>,
782 <&k3_clks 152 13>;
783 assigned-clock-parents = <&k3_clks 152 2>, /* PLL16_HSDIV0 */
784 <&k3_clks 152 6>, /* PLL19_HSDIV0 */
785 <&k3_clks 152 11>, /* PLL18_HSDIV0 */
786 <&k3_clks 152 18>; /* PLL23_HSDIV0 */
787};
788
789&dss_ports {
790 port {
791 dpi0_out: endpoint {
792 remote-endpoint = <&dp0_in>;
793 };
794 };
795};
796
797&dp0_ports {
798 #address-cells = <1>;
799 #size-cells = <0>;
800
801 port@0 {
802 reg = <0>;
803 dp0_in: endpoint {
804 remote-endpoint = <&dpi0_out>;
805 };
806 };
807
808 port@4 {
809 reg = <4>;
810 dp0_out: endpoint {
811 remote-endpoint = <&dp_connector_in>;
812 };
813 };
814};
815
816&mcasp10 {
817 status = "okay";
818 #sound-dai-cells = <0>;
819
820 pinctrl-names = "default";
821 pinctrl-0 = <&mcasp10_pins_default>;
822
823 op-mode = <0>; /* MCASP_IIS_MODE */
824 tdm-slots = <2>;
825 auxclk-fs-ratio = <256>;
826
827 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
828 1 1 1 1
829 2 2 2 0
830 >;
831 tx-num-evt = <0>;
832 rx-num-evt = <0>;
833};
834
835&cmn_refclk1 {
836 clock-frequency = <100000000>;
837};
838
839&wiz0_pll1_refclk {
840 assigned-clocks = <&wiz0_pll1_refclk>;
841 assigned-clock-parents = <&cmn_refclk1>;
842};
843
844&wiz0_refclk_dig {
845 assigned-clocks = <&wiz0_refclk_dig>;
846 assigned-clock-parents = <&cmn_refclk1>;
847};
848
849&wiz1_pll1_refclk {
850 assigned-clocks = <&wiz1_pll1_refclk>;
851 assigned-clock-parents = <&cmn_refclk1>;
852};
853
854&wiz1_refclk_dig {
855 assigned-clocks = <&wiz1_refclk_dig>;
856 assigned-clock-parents = <&cmn_refclk1>;
857};
858
859&wiz2_pll1_refclk {
860 assigned-clocks = <&wiz2_pll1_refclk>;
861 assigned-clock-parents = <&cmn_refclk1>;
862};
863
864&wiz2_refclk_dig {
865 assigned-clocks = <&wiz2_refclk_dig>;
866 assigned-clock-parents = <&cmn_refclk1>;
867};
868
869&serdes0 {
870 assigned-clocks = <&serdes0 CDNS_SIERRA_PLL_CMNLC>;
871 assigned-clock-parents = <&wiz0_pll1_refclk>;
872
873 serdes0_pcie_link: phy@0 {
874 reg = <0>;
875 cdns,num-lanes = <1>;
876 #phy-cells = <0>;
877 cdns,phy-type = <PHY_TYPE_PCIE>;
878 resets = <&serdes_wiz0 1>;
879 };
880};
881
882&serdes1 {
883 assigned-clocks = <&serdes1 CDNS_SIERRA_PLL_CMNLC>;
884 assigned-clock-parents = <&wiz1_pll1_refclk>;
885
886 serdes1_pcie_link: phy@0 {
887 reg = <0>;
888 cdns,num-lanes = <2>;
889 #phy-cells = <0>;
890 cdns,phy-type = <PHY_TYPE_PCIE>;
891 resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
892 };
893};
894
895&serdes2 {
896 assigned-clocks = <&serdes2 CDNS_SIERRA_PLL_CMNLC>;
897 assigned-clock-parents = <&wiz2_pll1_refclk>;
898
899 serdes2_pcie_link: phy@0 {
900 reg = <0>;
901 cdns,num-lanes = <2>;
902 #phy-cells = <0>;
903 cdns,phy-type = <PHY_TYPE_PCIE>;
904 resets = <&serdes_wiz2 1>, <&serdes_wiz2 2>;
905 };
906};
907
908&serdes4 {
909 torrent_phy_dp: phy@0 {
910 reg = <0>;
911 resets = <&serdes_wiz4 1>;
912 cdns,phy-type = <PHY_TYPE_DP>;
913 cdns,num-lanes = <4>;
914 cdns,max-bit-rate = <5400>;
915 #phy-cells = <0>;
916 };
917};
918
919&mhdp {
920 phys = <&torrent_phy_dp>;
921 phy-names = "dpphy";
922 pinctrl-names = "default";
923 pinctrl-0 = <&dp0_pins_default>;
924};
925
926&pcie0_rc {
927 status = "okay";
928 reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
929 phys = <&serdes0_pcie_link>;
930 phy-names = "pcie-phy";
931 num-lanes = <1>;
932};
933
934&pcie1_rc {
935 status = "okay";
936 reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
937 phys = <&serdes1_pcie_link>;
938 phy-names = "pcie-phy";
939 num-lanes = <2>;
940};
941
942&pcie2_rc {
943 status = "okay";
944 reset-gpios = <&exp2 20 GPIO_ACTIVE_HIGH>;
945 phys = <&serdes2_pcie_link>;
946 phy-names = "pcie-phy";
947 num-lanes = <2>;
948};
949
950&mcu_mcan0 {
951 status = "okay";
952 pinctrl-names = "default";
953 pinctrl-0 = <&mcu_mcan0_pins_default>;
954 phys = <&transceiver1>;
955};
956
957&mcu_mcan1 {
958 status = "okay";
959 pinctrl-names = "default";
960 pinctrl-0 = <&mcu_mcan1_pins_default>;
961 phys = <&transceiver2>;
962};
963
964&main_mcan0 {
965 status = "okay";
966 pinctrl-names = "default";
967 pinctrl-0 = <&main_mcan0_pins_default>;
968 phys = <&transceiver3>;
969};
970
971&main_mcan2 {
972 status = "okay";
973 pinctrl-names = "default";
974 pinctrl-0 = <&main_mcan2_pins_default>;
975 phys = <&transceiver4>;
976};