Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | |
| 3 | #include <dt-bindings/gpio/gpio.h> |
| 4 | #include <dt-bindings/input/gpio-keys.h> |
| 5 | #include <dt-bindings/input/input.h> |
| 6 | #include <dt-bindings/leds/common.h> |
| 7 | #include <dt-bindings/pinctrl/rockchip.h> |
| 8 | |
| 9 | #include "rk3566.dtsi" |
| 10 | |
| 11 | / { |
| 12 | aliases { |
| 13 | mmc0 = &sdhci; |
| 14 | }; |
| 15 | |
| 16 | chosen { |
| 17 | stdout-path = "serial2:1500000n8"; |
| 18 | }; |
| 19 | |
| 20 | adc-keys { |
| 21 | compatible = "adc-keys"; |
| 22 | io-channels = <&saradc 0>; |
| 23 | io-channel-names = "buttons"; |
| 24 | keyup-threshold-microvolt = <1750000>; |
| 25 | |
| 26 | button-recovery { |
| 27 | label = "recovery"; |
| 28 | linux,code = <KEY_VENDOR>; |
| 29 | press-threshold-microvolt = <0>; |
| 30 | }; |
| 31 | }; |
| 32 | |
| 33 | spk_amp: audio-amplifier { |
| 34 | compatible = "simple-audio-amplifier"; |
| 35 | enable-gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; |
| 36 | pinctrl-0 = <&spk_amp_enable_h>; |
| 37 | pinctrl-names = "default"; |
| 38 | sound-name-prefix = "Speaker Amp"; |
| 39 | }; |
| 40 | |
| 41 | dmic_codec: dmic-codec { |
| 42 | compatible = "dmic-codec"; |
| 43 | num-channels = <6>; |
| 44 | #sound-dai-cells = <0>; |
| 45 | }; |
| 46 | |
| 47 | gpio-keys { |
| 48 | compatible = "gpio-keys"; |
| 49 | pinctrl-0 = <&hall_int_l>; |
| 50 | pinctrl-names = "default"; |
| 51 | |
| 52 | switch-cover { |
| 53 | label = "cover"; |
| 54 | gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>; |
| 55 | linux,input-type = <EV_SW>; |
| 56 | linux,code = <SW_MACHINE_COVER>; |
| 57 | linux,can-disable; |
| 58 | wakeup-event-action = <EV_ACT_DEASSERTED>; |
| 59 | wakeup-source; |
| 60 | }; |
| 61 | }; |
| 62 | |
| 63 | gpio-leds { |
| 64 | compatible = "gpio-leds"; |
| 65 | pinctrl-0 = <&led_pin>; |
| 66 | pinctrl-names = "default"; |
| 67 | |
| 68 | led-0 { |
| 69 | color = <LED_COLOR_ID_WHITE>; |
| 70 | function = LED_FUNCTION_CHARGING; |
| 71 | gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>; |
| 72 | }; |
| 73 | }; |
| 74 | |
| 75 | sdio_pwrseq: sdio-pwrseq { |
| 76 | compatible = "mmc-pwrseq-simple"; |
| 77 | clocks = <&rk817 1>; |
| 78 | clock-names = "ext_clock"; |
| 79 | pinctrl-0 = <&wifi_enable_h>; |
| 80 | pinctrl-names = "default"; |
| 81 | reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>; |
| 82 | }; |
| 83 | |
| 84 | sound { |
| 85 | compatible = "simple-audio-card"; |
| 86 | simple-audio-card,name = "PineNote"; |
| 87 | simple-audio-card,aux-devs = <&spk_amp>; |
| 88 | simple-audio-card,widgets = "Headphone", "Headphones", |
| 89 | "Speaker", "Internal Speakers"; |
| 90 | simple-audio-card,routing = "Headphones", "HPOL", |
| 91 | "Headphones", "HPOR", |
| 92 | "Internal Speakers", "Speaker Amp OUTL", |
| 93 | "Internal Speakers", "Speaker Amp OUTR", |
| 94 | "Speaker Amp INL", "HPOL", |
| 95 | "Speaker Amp INR", "HPOR"; |
| 96 | simple-audio-card,pin-switches = "Internal Speakers"; |
| 97 | #address-cells = <1>; |
| 98 | #size-cells = <0>; |
| 99 | |
| 100 | simple-audio-card,dai-link@0 { |
| 101 | reg = <0>; |
| 102 | bitclock-master = <&link0_cpu>; |
| 103 | format = "i2s"; |
| 104 | frame-master = <&link0_cpu>; |
| 105 | mclk-fs = <256>; |
| 106 | |
| 107 | link0_cpu: cpu { |
| 108 | sound-dai = <&i2s1_8ch>; |
| 109 | }; |
| 110 | |
| 111 | link0_codec: codec { |
| 112 | sound-dai = <&rk817>; |
| 113 | }; |
| 114 | }; |
| 115 | |
| 116 | simple-audio-card,dai-link@1 { |
| 117 | reg = <1>; |
| 118 | bitclock-master = <&link1_cpu>; |
| 119 | format = "pdm"; |
| 120 | frame-master = <&link1_cpu>; |
| 121 | |
| 122 | link1_cpu: cpu { |
| 123 | sound-dai = <&pdm>; |
| 124 | }; |
| 125 | |
| 126 | link1_codec: codec { |
| 127 | sound-dai = <&dmic_codec>; |
| 128 | }; |
| 129 | }; |
| 130 | }; |
| 131 | |
| 132 | vbat_4g: vbat-4g { |
| 133 | compatible = "regulator-fixed"; |
| 134 | regulator-name = "vbat_4g"; |
| 135 | regulator-min-microvolt = <3800000>; |
| 136 | regulator-max-microvolt = <3800000>; |
| 137 | /* powered by vcc_bat, enabled by vbat_4g_en */ |
| 138 | vin-supply = <&vbat_4g_en>; |
| 139 | }; |
| 140 | |
| 141 | vcc_1v8: vcc-1v8 { |
| 142 | compatible = "regulator-fixed"; |
| 143 | regulator-name = "vcc_1v8"; |
| 144 | regulator-always-on; |
| 145 | regulator-min-microvolt = <1800000>; |
| 146 | regulator-max-microvolt = <1800000>; |
| 147 | /* powered by vcc_sys, enabled by vcc_1v8_en */ |
| 148 | vin-supply = <&vcc_1v8_en>; |
| 149 | }; |
| 150 | |
| 151 | vcc_bat: vcc-bat { |
| 152 | compatible = "regulator-fixed"; |
| 153 | regulator-name = "vcc_bat"; |
| 154 | regulator-always-on; |
| 155 | regulator-min-microvolt = <3800000>; |
| 156 | regulator-max-microvolt = <3800000>; |
| 157 | }; |
| 158 | |
| 159 | vcc_hall_3v3: vcc-hall-3v3 { |
| 160 | compatible = "regulator-fixed"; |
| 161 | regulator-name = "vcc_hall_3v3"; |
| 162 | regulator-always-on; |
| 163 | regulator-min-microvolt = <3300000>; |
| 164 | regulator-max-microvolt = <3300000>; |
| 165 | vin-supply = <&vcc_sys>; |
| 166 | }; |
| 167 | |
| 168 | vcc_sys: vcc-sys { |
| 169 | compatible = "regulator-fixed"; |
| 170 | regulator-name = "vcc_sys"; |
| 171 | regulator-always-on; |
| 172 | regulator-min-microvolt = <3800000>; |
| 173 | regulator-max-microvolt = <3800000>; |
| 174 | vin-supply = <&vcc_bat>; |
| 175 | }; |
| 176 | |
| 177 | vcc_wl: vcc-wl { |
| 178 | compatible = "regulator-fixed"; |
| 179 | enable-active-high; |
| 180 | gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; |
| 181 | pinctrl-0 = <&vcc_wl_pin>; |
| 182 | pinctrl-names = "default"; |
| 183 | regulator-name = "vcc_wl"; |
| 184 | regulator-min-microvolt = <3300000>; |
| 185 | regulator-max-microvolt = <3300000>; |
| 186 | vin-supply = <&vcc_bat>; |
| 187 | }; |
| 188 | |
| 189 | vdda_0v9: vdda-0v9 { |
| 190 | compatible = "regulator-fixed"; |
| 191 | regulator-name = "vdda_0v9"; |
| 192 | regulator-always-on; |
| 193 | regulator-min-microvolt = <900000>; |
| 194 | regulator-max-microvolt = <900000>; |
| 195 | /* powered by vcc_sys, enabled by vcc_1v8_en */ |
| 196 | vin-supply = <&vcc_1v8_en>; |
| 197 | }; |
| 198 | }; |
| 199 | |
| 200 | &cpu0 { |
| 201 | cpu-supply = <&vdd_cpu>; |
| 202 | }; |
| 203 | |
| 204 | &cpu1 { |
| 205 | cpu-supply = <&vdd_cpu>; |
| 206 | }; |
| 207 | |
| 208 | &cpu2 { |
| 209 | cpu-supply = <&vdd_cpu>; |
| 210 | }; |
| 211 | |
| 212 | &cpu3 { |
| 213 | cpu-supply = <&vdd_cpu>; |
| 214 | }; |
| 215 | |
| 216 | &i2c0 { |
| 217 | status = "okay"; |
| 218 | |
| 219 | vdd_cpu: regulator@1c { |
| 220 | compatible = "tcs,tcs4525"; |
| 221 | reg = <0x1c>; |
| 222 | fcs,suspend-voltage-selector = <0>; |
| 223 | regulator-name = "vdd_cpu"; |
| 224 | regulator-min-microvolt = <712500>; |
| 225 | regulator-max-microvolt = <1390000>; |
| 226 | regulator-ramp-delay = <2300>; |
| 227 | regulator-always-on; |
| 228 | vin-supply = <&vcc_sys>; |
| 229 | |
| 230 | regulator-state-mem { |
| 231 | regulator-on-in-suspend; |
| 232 | }; |
| 233 | }; |
| 234 | |
| 235 | rk817: pmic@20 { |
| 236 | compatible = "rockchip,rk817"; |
| 237 | reg = <0x20>; |
| 238 | interrupt-parent = <&gpio0>; |
| 239 | interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; |
| 240 | assigned-clocks = <&cru I2S1_MCLKOUT_TX>; |
| 241 | assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; |
| 242 | clocks = <&cru I2S1_MCLKOUT_TX>; |
| 243 | clock-names = "mclk"; |
| 244 | #clock-cells = <1>; |
| 245 | pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>, <&pmic_sleep>; |
| 246 | pinctrl-names = "default"; |
| 247 | rockchip,system-power-controller; |
| 248 | #sound-dai-cells = <0>; |
| 249 | wakeup-source; |
| 250 | |
| 251 | vcc1-supply = <&vcc_sys>; |
| 252 | vcc2-supply = <&vcc_sys>; |
| 253 | vcc3-supply = <&vcc_sys>; |
| 254 | vcc4-supply = <&vcc_sys>; |
| 255 | vcc5-supply = <&vcc_sys>; |
| 256 | vcc6-supply = <&vcc_sys>; |
| 257 | vcc7-supply = <&vcc_sys>; |
| 258 | vcc8-supply = <&vcc_sys>; |
| 259 | vcc9-supply = <&dcdc_boost>; |
| 260 | |
| 261 | regulators { |
| 262 | vdd_logic: DCDC_REG1 { |
| 263 | regulator-name = "vdd_logic"; |
| 264 | regulator-always-on; |
| 265 | regulator-min-microvolt = <500000>; |
| 266 | regulator-max-microvolt = <1350000>; |
| 267 | regulator-ramp-delay = <6001>; |
| 268 | regulator-initial-mode = <0x2>; |
| 269 | |
| 270 | regulator-state-mem { |
| 271 | regulator-off-in-suspend; |
| 272 | regulator-suspend-microvolt = <900000>; |
| 273 | }; |
| 274 | }; |
| 275 | |
| 276 | vdd_gpu_npu: DCDC_REG2 { |
| 277 | regulator-name = "vdd_gpu_npu"; |
| 278 | regulator-min-microvolt = <500000>; |
| 279 | regulator-max-microvolt = <1350000>; |
| 280 | regulator-ramp-delay = <6001>; |
| 281 | regulator-initial-mode = <0x2>; |
| 282 | |
| 283 | regulator-state-mem { |
| 284 | regulator-off-in-suspend; |
| 285 | }; |
| 286 | }; |
| 287 | |
| 288 | vcc_ddr: DCDC_REG3 { |
| 289 | regulator-name = "vcc_ddr"; |
| 290 | regulator-always-on; |
| 291 | regulator-initial-mode = <0x2>; |
| 292 | |
| 293 | regulator-state-mem { |
| 294 | regulator-on-in-suspend; |
| 295 | }; |
| 296 | }; |
| 297 | |
| 298 | vcc_3v3: DCDC_REG4 { |
| 299 | regulator-name = "vcc_3v3"; |
| 300 | regulator-always-on; |
| 301 | regulator-min-microvolt = <3300000>; |
| 302 | regulator-max-microvolt = <3300000>; |
| 303 | regulator-initial-mode = <0x2>; |
| 304 | |
| 305 | regulator-state-mem { |
| 306 | regulator-off-in-suspend; |
| 307 | }; |
| 308 | }; |
| 309 | |
| 310 | vcca_1v8_pmu: LDO_REG1 { |
| 311 | regulator-name = "vcca_1v8_pmu"; |
| 312 | regulator-always-on; |
| 313 | regulator-min-microvolt = <1800000>; |
| 314 | regulator-max-microvolt = <1800000>; |
| 315 | |
| 316 | regulator-state-mem { |
| 317 | regulator-on-in-suspend; |
| 318 | }; |
| 319 | }; |
| 320 | |
| 321 | /* unused */ |
| 322 | vdda_0v9_ldo: LDO_REG2 { |
| 323 | regulator-name = "vdda_0v9_ldo"; |
| 324 | regulator-min-microvolt = <900000>; |
| 325 | regulator-max-microvolt = <900000>; |
| 326 | |
| 327 | regulator-state-mem { |
| 328 | regulator-off-in-suspend; |
| 329 | }; |
| 330 | }; |
| 331 | |
| 332 | vdda_0v9_pmu: LDO_REG3 { |
| 333 | regulator-name = "vdda_0v9_pmu"; |
| 334 | regulator-always-on; |
| 335 | regulator-min-microvolt = <900000>; |
| 336 | regulator-max-microvolt = <900000>; |
| 337 | |
| 338 | regulator-state-mem { |
| 339 | regulator-on-in-suspend; |
| 340 | }; |
| 341 | }; |
| 342 | |
| 343 | vccio_acodec: LDO_REG4 { |
| 344 | regulator-name = "vccio_acodec"; |
| 345 | regulator-always-on; |
| 346 | regulator-min-microvolt = <3300000>; |
| 347 | regulator-max-microvolt = <3300000>; |
| 348 | |
| 349 | regulator-state-mem { |
| 350 | regulator-off-in-suspend; |
| 351 | }; |
| 352 | }; |
| 353 | |
| 354 | /* unused */ |
| 355 | vccio_sd: LDO_REG5 { |
| 356 | regulator-name = "vccio_sd"; |
| 357 | regulator-min-microvolt = <1800000>; |
| 358 | regulator-max-microvolt = <3300000>; |
| 359 | |
| 360 | regulator-state-mem { |
| 361 | regulator-off-in-suspend; |
| 362 | }; |
| 363 | }; |
| 364 | |
| 365 | vcc_3v3_pmu: LDO_REG6 { |
| 366 | regulator-name = "vcc_3v3_pmu"; |
| 367 | regulator-always-on; |
| 368 | regulator-min-microvolt = <3300000>; |
| 369 | regulator-max-microvolt = <3300000>; |
| 370 | |
| 371 | regulator-state-mem { |
| 372 | regulator-on-in-suspend; |
| 373 | }; |
| 374 | }; |
| 375 | |
| 376 | vcc_1v8_en: LDO_REG7 { |
| 377 | regulator-name = "vcc_1v8_en"; |
| 378 | regulator-min-microvolt = <1800000>; |
| 379 | regulator-max-microvolt = <1800000>; |
| 380 | |
| 381 | regulator-state-mem { |
| 382 | regulator-off-in-suspend; |
| 383 | }; |
| 384 | }; |
| 385 | |
| 386 | vbat_4g_en: LDO_REG8 { |
| 387 | regulator-name = "vbat_4g_en"; |
| 388 | regulator-min-microvolt = <1800000>; |
| 389 | regulator-max-microvolt = <1800000>; |
| 390 | |
| 391 | regulator-state-mem { |
| 392 | regulator-off-in-suspend; |
| 393 | }; |
| 394 | }; |
| 395 | |
| 396 | sleep_sta_ctl: LDO_REG9 { |
| 397 | regulator-name = "sleep_sta_ctl"; |
| 398 | regulator-min-microvolt = <1800000>; |
| 399 | regulator-max-microvolt = <1800000>; |
| 400 | |
| 401 | regulator-state-mem { |
| 402 | regulator-on-in-suspend; |
| 403 | }; |
| 404 | }; |
| 405 | |
| 406 | dcdc_boost: BOOST { |
| 407 | regulator-name = "boost"; |
| 408 | regulator-min-microvolt = <5000000>; |
| 409 | regulator-max-microvolt = <5000000>; |
| 410 | |
| 411 | regulator-state-mem { |
| 412 | regulator-off-in-suspend; |
| 413 | }; |
| 414 | }; |
| 415 | |
| 416 | otg_switch: OTG_SWITCH { |
| 417 | regulator-name = "otg_switch"; |
| 418 | |
| 419 | regulator-state-mem { |
| 420 | regulator-off-in-suspend; |
| 421 | }; |
| 422 | }; |
| 423 | }; |
| 424 | }; |
| 425 | }; |
| 426 | |
| 427 | &i2c1 { |
| 428 | status = "okay"; |
| 429 | |
| 430 | digitizer@9 { |
| 431 | compatible = "wacom,w9013", "hid-over-i2c"; |
| 432 | reg = <0x09>; |
| 433 | interrupt-parent = <&gpio0>; |
| 434 | interrupts = <RK_PB6 IRQ_TYPE_LEVEL_LOW>; |
| 435 | hid-descr-addr = <0x1>; |
| 436 | pinctrl-0 = <&pen_fwe>, <&pen_irq_l>, <&pen_rst_l>; |
| 437 | pinctrl-names = "default"; |
| 438 | vdd-supply = <&vcc_3v3_pmu>; |
| 439 | }; |
| 440 | }; |
| 441 | |
| 442 | &i2c3 { |
| 443 | pinctrl-0 = <&i2c3m1_xfer>; |
| 444 | status = "okay"; |
| 445 | |
| 446 | led-controller@36 { |
| 447 | compatible = "ti,lm3630a"; |
| 448 | reg = <0x36>; |
| 449 | enable-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; |
| 450 | pinctrl-0 = <&backlight_hwen_h>; |
| 451 | pinctrl-names = "default"; |
| 452 | #address-cells = <1>; |
| 453 | #size-cells = <0>; |
| 454 | |
| 455 | led@0 { |
| 456 | reg = <0>; |
| 457 | label = "backlight_cool"; |
| 458 | default-brightness = <0>; |
| 459 | }; |
| 460 | |
| 461 | led@1 { |
| 462 | reg = <1>; |
| 463 | label = "backlight_warm"; |
| 464 | default-brightness = <0>; |
| 465 | }; |
| 466 | }; |
| 467 | |
| 468 | wusb3801: tcpc@60 { |
| 469 | compatible = "willsemi,wusb3801"; |
| 470 | reg = <0x60>; |
| 471 | interrupt-parent = <&gpio0>; |
| 472 | interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; |
| 473 | pinctrl-0 = <&tcpc_int_l>; |
| 474 | pinctrl-names = "default"; |
| 475 | |
| 476 | connector { |
| 477 | compatible = "usb-c-connector"; |
| 478 | label = "USB-C"; |
| 479 | vbus-supply = <&otg_switch>; |
| 480 | power-role = "dual"; |
| 481 | try-power-role = "sink"; |
| 482 | data-role = "dual"; |
| 483 | typec-power-opmode = "default"; |
| 484 | pd-disable; |
| 485 | |
| 486 | ports { |
| 487 | #address-cells = <0x1>; |
| 488 | #size-cells = <0x0>; |
| 489 | |
| 490 | port@0 { |
| 491 | reg = <0x0>; |
| 492 | |
| 493 | typec_hs_usb2phy0: endpoint { |
| 494 | remote-endpoint = <&usb2phy0_typec_hs>; |
| 495 | }; |
| 496 | }; |
| 497 | }; |
| 498 | }; |
| 499 | }; |
| 500 | }; |
| 501 | |
| 502 | &i2c5 { |
| 503 | status = "okay"; |
| 504 | |
| 505 | accelerometer@18 { |
| 506 | compatible = "silan,sc7a20"; |
| 507 | reg = <0x18>; |
| 508 | interrupt-parent = <&gpio3>; |
| 509 | interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; |
| 510 | pinctrl-0 = <&accelerometer_int_l>; |
| 511 | pinctrl-names = "default"; |
| 512 | st,drdy-int-pin = <1>; |
| 513 | vdd-supply = <&vcc_3v3>; |
| 514 | vddio-supply = <&vcc_3v3>; |
| 515 | }; |
| 516 | }; |
| 517 | |
| 518 | &i2s1_8ch { |
| 519 | pinctrl-0 = <&i2s1m0_lrcktx>, <&i2s1m0_sclktx>, <&i2s1m0_sdi0>, <&i2s1m0_sdo0>; |
| 520 | rockchip,trcm-sync-tx-only; |
| 521 | status = "okay"; |
| 522 | }; |
| 523 | |
| 524 | &pdm { |
| 525 | pinctrl-0 = <&pdmm0_clk1>, <&pdmm0_sdi1>, <&pdmm0_sdi2>; |
| 526 | /* microphones are on channels 1 and 2 */ |
| 527 | rockchip,path-map = <1>, <2>, <0>, <3>; |
| 528 | status = "okay"; |
| 529 | }; |
| 530 | |
| 531 | &pinctrl { |
| 532 | accelerometer { |
| 533 | accelerometer_int_l: accelerometer-int-l { |
| 534 | rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 535 | }; |
| 536 | }; |
| 537 | |
| 538 | audio-amplifier { |
| 539 | spk_amp_enable_h: spk-amp-enable-h { |
| 540 | rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 541 | }; |
| 542 | }; |
| 543 | |
| 544 | backlight { |
| 545 | backlight_hwen_h: backlight-hwen-h { |
| 546 | rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 547 | }; |
| 548 | }; |
| 549 | |
| 550 | bt { |
| 551 | bt_enable_h: bt-enable-h { |
| 552 | rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 553 | }; |
| 554 | |
| 555 | bt_host_wake_l: bt-host-wake-l { |
| 556 | rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>; |
| 557 | }; |
| 558 | |
| 559 | bt_wake_h: bt-wake-h { |
| 560 | rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 561 | }; |
| 562 | }; |
| 563 | |
| 564 | led { |
| 565 | led_pin: led-pin { |
| 566 | rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 567 | }; |
| 568 | }; |
| 569 | |
| 570 | hall { |
| 571 | hall_int_l: hall-int-l { |
| 572 | rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 573 | }; |
| 574 | }; |
| 575 | |
| 576 | pen { |
| 577 | pen_fwe: pen-fwe { |
| 578 | rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>; |
| 579 | }; |
| 580 | |
| 581 | pen_irq_l: pen-irq-l { |
| 582 | rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 583 | }; |
| 584 | |
| 585 | pen_rst_l: pen-rst-l { |
| 586 | rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 587 | }; |
| 588 | }; |
| 589 | |
| 590 | pmic { |
| 591 | pmic_int_l: pmic-int-l { |
| 592 | rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 593 | }; |
| 594 | |
| 595 | pmic_sleep: pmic-sleep { |
| 596 | rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>; |
| 597 | }; |
| 598 | }; |
| 599 | |
| 600 | sdio-pwrseq { |
| 601 | wifi_enable_h: wifi-enable-h { |
| 602 | rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 603 | }; |
| 604 | }; |
| 605 | |
| 606 | tcpc { |
| 607 | tcpc_int_l: tcpc-int-l { |
| 608 | rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; |
| 609 | }; |
| 610 | }; |
| 611 | |
| 612 | vcc-wl { |
| 613 | vcc_wl_pin: vcc-wl-pin { |
| 614 | rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 615 | }; |
| 616 | }; |
| 617 | |
| 618 | wifi { |
| 619 | wifi_host_wake_l: wifi-host-wake-l { |
| 620 | rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; |
| 621 | }; |
| 622 | }; |
| 623 | }; |
| 624 | |
| 625 | &pmu_io_domains { |
| 626 | pmuio1-supply = <&vcc_3v3_pmu>; |
| 627 | pmuio2-supply = <&vcc_3v3_pmu>; |
| 628 | vccio1-supply = <&vccio_acodec>; |
| 629 | vccio2-supply = <&vcc_1v8>; |
| 630 | vccio3-supply = <&vcc_3v3>; |
| 631 | vccio4-supply = <&vcca_1v8_pmu>; |
| 632 | vccio5-supply = <&vcc_3v3>; |
| 633 | vccio6-supply = <&vcc_3v3>; |
| 634 | status = "okay"; |
| 635 | }; |
| 636 | |
| 637 | &saradc { |
| 638 | vref-supply = <&vcc_1v8>; |
| 639 | status = "okay"; |
| 640 | }; |
| 641 | |
| 642 | &sdhci { |
| 643 | bus-width = <8>; |
| 644 | mmc-hs200-1_8v; |
| 645 | non-removable; |
| 646 | pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>, <&emmc_datastrobe>, <&emmc_rstnout>; |
| 647 | pinctrl-names = "default"; |
| 648 | vmmc-supply = <&vcc_3v3>; |
| 649 | vqmmc-supply = <&vcc_1v8>; |
| 650 | status = "okay"; |
| 651 | }; |
| 652 | |
| 653 | &sdmmc1 { |
| 654 | bus-width = <4>; |
| 655 | cap-sd-highspeed; |
| 656 | cap-sdio-irq; |
| 657 | keep-power-in-suspend; |
| 658 | mmc-pwrseq = <&sdio_pwrseq>; |
| 659 | non-removable; |
| 660 | pinctrl-0 = <&sdmmc1_bus4>, <&sdmmc1_clk>, <&sdmmc1_cmd>; |
| 661 | pinctrl-names = "default"; |
| 662 | sd-uhs-sdr104; |
| 663 | vmmc-supply = <&vcc_wl>; |
| 664 | vqmmc-supply = <&vcca_1v8_pmu>; |
| 665 | status = "okay"; |
| 666 | }; |
| 667 | |
| 668 | &tsadc { |
| 669 | /* tshut mode 0:CRU 1:GPIO */ |
| 670 | rockchip,hw-tshut-mode = <1>; |
| 671 | /* tshut polarity 0:LOW 1:HIGH */ |
| 672 | rockchip,hw-tshut-polarity = <0>; |
| 673 | status = "okay"; |
| 674 | }; |
| 675 | |
| 676 | &uart1 { |
| 677 | pinctrl-0 = <&uart1m0_ctsn>, <&uart1m0_rtsn>, <&uart1m0_xfer>; |
| 678 | pinctrl-names = "default"; |
| 679 | uart-has-rtscts; |
| 680 | status = "okay"; |
| 681 | |
| 682 | bluetooth { |
| 683 | compatible = "brcm,bcm43438-bt"; |
| 684 | clocks = <&rk817 1>; |
| 685 | clock-names = "lpo"; |
| 686 | device-wake-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; |
| 687 | host-wake-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; |
| 688 | reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>; |
| 689 | pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_h>; |
| 690 | pinctrl-names = "default"; |
| 691 | vbat-supply = <&vcc_wl>; |
| 692 | vddio-supply = <&vcca_1v8_pmu>; |
| 693 | }; |
| 694 | }; |
| 695 | |
| 696 | &uart2 { |
| 697 | status = "okay"; |
| 698 | }; |
| 699 | |
| 700 | &usb_host0_xhci { |
| 701 | dr_mode = "otg"; |
| 702 | status = "okay"; |
| 703 | }; |
| 704 | |
| 705 | &usb2phy0 { |
| 706 | status = "okay"; |
| 707 | }; |
| 708 | |
| 709 | &usb2phy0_otg { |
| 710 | status = "okay"; |
| 711 | |
| 712 | port { |
| 713 | usb2phy0_typec_hs: endpoint { |
| 714 | remote-endpoint = <&typec_hs_usb2phy0>; |
| 715 | }; |
| 716 | }; |
| 717 | }; |