Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Device Tree Source for the HiHope RZ/G2H Rev.4.0 and |
| 4 | * HiHope RZ/G2[MN] Rev.3.0/4.0 main board common parts |
| 5 | * |
| 6 | * Copyright (C) 2020 Renesas Electronics Corp. |
| 7 | */ |
| 8 | |
| 9 | #include <dt-bindings/gpio/gpio.h> |
| 10 | #include "hihope-common.dtsi" |
| 11 | |
| 12 | / { |
| 13 | audio_clkout: audio-clkout { |
| 14 | /* |
| 15 | * This is same as <&rcar_sound 0> |
| 16 | * but needed to avoid cs2000/rcar_sound probe dead-lock |
| 17 | */ |
| 18 | compatible = "fixed-clock"; |
| 19 | #clock-cells = <0>; |
| 20 | clock-frequency = <12288000>; |
| 21 | }; |
| 22 | |
| 23 | wlan_en_reg: regulator-wlan_en { |
| 24 | compatible = "regulator-fixed"; |
| 25 | regulator-name = "wlan-en-regulator"; |
| 26 | regulator-min-microvolt = <1800000>; |
| 27 | regulator-max-microvolt = <1800000>; |
| 28 | startup-delay-us = <70000>; |
| 29 | |
| 30 | gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; |
| 31 | enable-active-high; |
| 32 | }; |
| 33 | |
| 34 | x1801_clk: x1801-clock { |
| 35 | compatible = "fixed-clock"; |
| 36 | #clock-cells = <0>; |
| 37 | clock-frequency = <24576000>; |
| 38 | }; |
| 39 | }; |
| 40 | |
| 41 | &hscif0 { |
| 42 | bluetooth { |
| 43 | compatible = "ti,wl1837-st"; |
| 44 | enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; |
| 45 | }; |
| 46 | }; |
| 47 | |
| 48 | &i2c2 { |
| 49 | pinctrl-0 = <&i2c2_pins>; |
| 50 | pinctrl-names = "default"; |
| 51 | status = "okay"; |
| 52 | |
| 53 | cs2000: clk_multiplier@4f { |
| 54 | #clock-cells = <0>; |
| 55 | compatible = "cirrus,cs2000-cp"; |
| 56 | reg = <0x4f>; |
| 57 | clocks = <&audio_clkout>, <&x1801_clk>; |
| 58 | clock-names = "clk_in", "ref_clk"; |
| 59 | |
| 60 | assigned-clocks = <&cs2000>; |
| 61 | assigned-clock-rates = <24576000>; /* 1/1 divide */ |
| 62 | }; |
| 63 | }; |
| 64 | |
| 65 | &pfc { |
| 66 | i2c2_pins: i2c2 { |
| 67 | groups = "i2c2_a"; |
| 68 | function = "i2c2"; |
| 69 | }; |
| 70 | |
| 71 | sound_clk_pins: sound_clk { |
| 72 | groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clkout_a"; |
| 73 | function = "audio_clk"; |
| 74 | }; |
| 75 | |
| 76 | sound_pins: sound { |
| 77 | groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; |
| 78 | function = "ssi"; |
| 79 | }; |
| 80 | }; |
| 81 | |
| 82 | &rcar_sound { |
| 83 | pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; |
| 84 | pinctrl-names = "default"; |
| 85 | status = "okay"; |
| 86 | |
| 87 | /* Single DAI */ |
| 88 | #sound-dai-cells = <0>; |
| 89 | |
| 90 | /* audio_clkout0/1/2/3 */ |
| 91 | #clock-cells = <1>; |
| 92 | clock-frequency = <12288000 11289600>; |
| 93 | |
| 94 | /* |
| 95 | * Update <audio_clk_b> to <cs2000> |
| 96 | * Switch SW2404 should be at position 1 so that clock from |
| 97 | * CS2000 is connected to AUDIO_CLKB_A |
| 98 | */ |
| 99 | clocks = <&cpg CPG_MOD 1005>, |
| 100 | <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, |
| 101 | <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, |
| 102 | <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, |
| 103 | <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, |
| 104 | <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, |
| 105 | <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, |
| 106 | <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, |
| 107 | <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, |
| 108 | <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, |
| 109 | <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, |
| 110 | <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, |
| 111 | <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, |
| 112 | <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, |
| 113 | <&audio_clk_a>, <&cs2000>, |
| 114 | <&audio_clk_c>, |
| 115 | <&cpg CPG_MOD 922>; |
| 116 | |
| 117 | rsnd_port: port { |
| 118 | rsnd_endpoint: endpoint { |
| 119 | remote-endpoint = <&dw_hdmi0_snd_in>; |
| 120 | |
| 121 | dai-format = "i2s"; |
| 122 | bitclock-master = <&rsnd_endpoint>; |
| 123 | frame-master = <&rsnd_endpoint>; |
| 124 | |
| 125 | playback = <&ssi2>; |
| 126 | }; |
| 127 | }; |
| 128 | }; |