Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 53633a893a06bd5a0c807287d9cc29337806eaf7 / . / src / arm64 / qcom / sm8550-mtp.dts
blob: 9a70875028b7ecdcf890d3c6cb87d6d074f1f342 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame^]1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2022, Linaro Limited
4 */
5
6/dts-v1/;
7
8#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
9#include "sm8550.dtsi"
10#include "pm8010.dtsi"
11#include "pm8550.dtsi"
12#include "pm8550b.dtsi"
13#include "pm8550ve.dtsi"
14#include "pm8550vs.dtsi"
15#include "pmk8550.dtsi"
16#include "pmr735d_a.dtsi"
17#include "pmr735d_b.dtsi"
18
19/ {
20 model = "Qualcomm Technologies, Inc. SM8550 MTP";
21 compatible = "qcom,sm8550-mtp", "qcom,sm8550";
22 chassis-type = "handset";
23
24 aliases {
25 serial0 = &uart7;
26 };
27
28 wcd938x: audio-codec {
29 compatible = "qcom,wcd9385-codec";
30
31 pinctrl-names = "default";
32 pinctrl-0 = <&wcd_default>;
33
34 qcom,micbias1-microvolt = <1800000>;
35 qcom,micbias2-microvolt = <1800000>;
36 qcom,micbias3-microvolt = <1800000>;
37 qcom,micbias4-microvolt = <1800000>;
38 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
39 qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
40 qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
41 qcom,rx-device = <&wcd_rx>;
42 qcom,tx-device = <&wcd_tx>;
43
44 reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
45
46 vdd-buck-supply = <&vreg_l15b_1p8>;
47 vdd-rxtx-supply = <&vreg_l15b_1p8>;
48 vdd-io-supply = <&vreg_l15b_1p8>;
49 vdd-mic-bias-supply = <&vreg_bob1>;
50
51 #sound-dai-cells = <1>;
52 };
53
54 chosen {
55 stdout-path = "serial0:115200n8";
56 };
57
58 pmic-glink {
59 compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
60 #address-cells = <1>;
61 #size-cells = <0>;
62 orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
63
64 connector@0 {
65 compatible = "usb-c-connector";
66 reg = <0>;
67 power-role = "dual";
68 data-role = "dual";
69
70 ports {
71 #address-cells = <1>;
72 #size-cells = <0>;
73
74 port@0 {
75 reg = <0>;
76
77 pmic_glink_hs_in: endpoint {
78 remote-endpoint = <&usb_1_dwc3_hs>;
79 };
80 };
81
82 port@1 {
83 reg = <1>;
84
85 pmic_glink_ss_in: endpoint {
86 remote-endpoint = <&usb_dp_qmpphy_out>;
87 };
88 };
89
90 port@2 {
91 reg = <2>;
92
93 pmic_glink_sbu: endpoint {
94 remote-endpoint = <&fsa4480_sbu_mux>;
95 };
96 };
97 };
98 };
99 };
100
101 sound {
102 compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
103 model = "SM8550-MTP";
104 audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
105 "SpkrRight IN", "WSA_SPK2 OUT",
106 "IN1_HPHL", "HPHL_OUT",
107 "IN2_HPHR", "HPHR_OUT",
108 "AMIC2", "MIC BIAS2",
109 "VA DMIC0", "MIC BIAS1",
110 "VA DMIC1", "MIC BIAS1",
111 "VA DMIC2", "MIC BIAS3",
112 "TX DMIC0", "MIC BIAS1",
113 "TX DMIC1", "MIC BIAS2",
114 "TX DMIC2", "MIC BIAS3",
115 "TX SWR_ADC1", "ADC2_OUTPUT";
116
117 wcd-playback-dai-link {
118 link-name = "WCD Playback";
119
120 cpu {
121 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
122 };
123
124 codec {
125 sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
126 };
127
128 platform {
129 sound-dai = <&q6apm>;
130 };
131 };
132
133 wcd-capture-dai-link {
134 link-name = "WCD Capture";
135
136 cpu {
137 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
138 };
139
140 codec {
141 sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>;
142 };
143
144 platform {
145 sound-dai = <&q6apm>;
146 };
147 };
148
149 wsa-dai-link {
150 link-name = "WSA Playback";
151
152 cpu {
153 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
154 };
155
156 codec {
157 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
158 };
159
160 platform {
161 sound-dai = <&q6apm>;
162 };
163 };
164
165 va-dai-link {
166 link-name = "VA Capture";
167
168 cpu {
169 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
170 };
171
172 codec {
173 sound-dai = <&lpass_vamacro 0>;
174 };
175
176 platform {
177 sound-dai = <&q6apm>;
178 };
179 };
180 };
181
182 vph_pwr: vph-pwr-regulator {
183 compatible = "regulator-fixed";
184 regulator-name = "vph_pwr";
185 regulator-min-microvolt = <3700000>;
186 regulator-max-microvolt = <3700000>;
187
188 regulator-always-on;
189 regulator-boot-on;
190 };
191};
192
193&apps_rsc {
194 regulators-0 {
195 compatible = "qcom,pm8550-rpmh-regulators";
196 qcom,pmic-id = "b";
197
198 vdd-bob1-supply = <&vph_pwr>;
199 vdd-bob2-supply = <&vph_pwr>;
200 vdd-l1-l4-l10-supply = <&vreg_s6g_1p8>;
201 vdd-l2-l13-l14-supply = <&vreg_bob1>;
202 vdd-l3-supply = <&vreg_s4g_1p3>;
203 vdd-l5-l16-supply = <&vreg_bob1>;
204 vdd-l6-l7-supply = <&vreg_bob1>;
205 vdd-l8-l9-supply = <&vreg_bob1>;
206 vdd-l11-supply = <&vreg_s4g_1p3>;
207 vdd-l12-supply = <&vreg_s6g_1p8>;
208 vdd-l15-supply = <&vreg_s6g_1p8>;
209 vdd-l17-supply = <&vreg_bob2>;
210
211 vreg_bob1: bob1 {
212 regulator-name = "vreg_bob1";
213 regulator-min-microvolt = <3296000>;
214 regulator-max-microvolt = <3960000>;
215 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
216 };
217
218 vreg_bob2: bob2 {
219 regulator-name = "vreg_bob2";
220 regulator-min-microvolt = <2720000>;
221 regulator-max-microvolt = <3960000>;
222 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
223 };
224
225 vreg_l1b_1p8: ldo1 {
226 regulator-name = "vreg_l1b_1p8";
227 regulator-min-microvolt = <1800000>;
228 regulator-max-microvolt = <1800000>;
229 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
230 };
231
232 vreg_l2b_3p0: ldo2 {
233 regulator-name = "vreg_l2b_3p0";
234 regulator-min-microvolt = <3008000>;
235 regulator-max-microvolt = <3008000>;
236 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
237 };
238
239 vreg_l5b_3p1: ldo5 {
240 regulator-name = "vreg_l5b_3p1";
241 regulator-min-microvolt = <3104000>;
242 regulator-max-microvolt = <3104000>;
243 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
244 };
245
246 vreg_l6b_1p8: ldo6 {
247 regulator-name = "vreg_l6b_1p8";
248 regulator-min-microvolt = <1800000>;
249 regulator-max-microvolt = <3008000>;
250 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
251 };
252
253 vreg_l7b_1p8: ldo7 {
254 regulator-name = "vreg_l7b_1p8";
255 regulator-min-microvolt = <1800000>;
256 regulator-max-microvolt = <3008000>;
257 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
258 };
259
260 vreg_l8b_1p8: ldo8 {
261 regulator-name = "vreg_l8b_1p8";
262 regulator-min-microvolt = <1800000>;
263 regulator-max-microvolt = <3008000>;
264 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
265 };
266
267 vreg_l9b_2p9: ldo9 {
268 regulator-name = "vreg_l9b_2p9";
269 regulator-min-microvolt = <2960000>;
270 regulator-max-microvolt = <3008000>;
271 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
272 };
273
274 vreg_l11b_1p2: ldo11 {
275 regulator-name = "vreg_l11b_1p2";
276 regulator-min-microvolt = <1200000>;
277 regulator-max-microvolt = <1504000>;
278 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
279 };
280
281 vreg_l12b_1p8: ldo12 {
282 regulator-name = "vreg_l12b_1p8";
283 regulator-min-microvolt = <1800000>;
284 regulator-max-microvolt = <1800000>;
285 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
286 };
287
288 vreg_l13b_3p0: ldo13 {
289 regulator-name = "vreg_l13b_3p0";
290 regulator-min-microvolt = <3000000>;
291 regulator-max-microvolt = <3000000>;
292 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
293 };
294
295 vreg_l14b_3p2: ldo14 {
296 regulator-name = "vreg_l14b_3p2";
297 regulator-min-microvolt = <3200000>;
298 regulator-max-microvolt = <3200000>;
299 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
300 };
301
302 vreg_l15b_1p8: ldo15 {
303 regulator-name = "vreg_l15b_1p8";
304 regulator-min-microvolt = <1800000>;
305 regulator-max-microvolt = <1800000>;
306 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
307 };
308
309 vreg_l16b_2p8: ldo16 {
310 regulator-name = "vreg_l16b_2p8";
311 regulator-min-microvolt = <2800000>;
312 regulator-max-microvolt = <2800000>;
313 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
314 };
315
316 vreg_l17b_2p5: ldo17 {
317 regulator-name = "vreg_l17b_2p5";
318 regulator-min-microvolt = <2504000>;
319 regulator-max-microvolt = <2504000>;
320 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
321 };
322 };
323
324 regulators-1 {
325 compatible = "qcom,pm8550vs-rpmh-regulators";
326 qcom,pmic-id = "c";
327
328 vdd-l3-supply = <&vreg_s4e_0p9>;
329
330 vreg_l3c_0p91: ldo3 {
331 regulator-name = "vreg_l3c_0p9";
332 regulator-min-microvolt = <880000>;
333 regulator-max-microvolt = <912000>;
334 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
335 };
336 };
337
338 regulators-2 {
339 compatible = "qcom,pm8550vs-rpmh-regulators";
340 qcom,pmic-id = "d";
341
342 vdd-l1-supply = <&vreg_s4e_0p9>;
343
344 vreg_l1d_0p88: ldo1 {
345 regulator-name = "vreg_l1d_0p88";
346 regulator-min-microvolt = <880000>;
347 regulator-max-microvolt = <920000>;
348 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
349 };
350 };
351
352 regulators-3 {
353 compatible = "qcom,pm8550vs-rpmh-regulators";
354 qcom,pmic-id = "e";
355
356 vdd-l1-supply = <&vreg_s4e_0p9>;
357 vdd-l2-supply = <&vreg_s4e_0p9>;
358 vdd-l3-supply = <&vreg_s4g_1p3>;
359 vdd-s4-supply = <&vph_pwr>;
360 vdd-s5-supply = <&vph_pwr>;
361
362 vreg_s4e_0p9: smps4 {
363 regulator-name = "vreg_s4e_0p9";
364 regulator-min-microvolt = <904000>;
365 regulator-max-microvolt = <984000>;
366 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
367 };
368
369 vreg_s5e_1p1: smps5 {
370 regulator-name = "vreg_s5e_1p1";
371 regulator-min-microvolt = <1080000>;
372 regulator-max-microvolt = <1120000>;
373 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
374 };
375
376 vreg_l1e_0p88: ldo1 {
377 regulator-name = "vreg_l1e_0p88";
378 regulator-min-microvolt = <880000>;
379 regulator-max-microvolt = <880000>;
380 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
381 };
382
383 vreg_l2e_0p9: ldo2 {
384 regulator-name = "vreg_l2e_0p9";
385 regulator-min-microvolt = <904000>;
386 regulator-max-microvolt = <970000>;
387 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
388 };
389
390 vreg_l3e_1p2: ldo3 {
391 regulator-name = "vreg_l3e_1p2";
392 regulator-min-microvolt = <1200000>;
393 regulator-max-microvolt = <1200000>;
394 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
395 };
396 };
397
398 regulators-4 {
399 compatible = "qcom,pm8550ve-rpmh-regulators";
400 qcom,pmic-id = "f";
401
402 vdd-l1-supply = <&vreg_s4e_0p9>;
403 vdd-l2-supply = <&vreg_s4e_0p9>;
404 vdd-l3-supply = <&vreg_s4e_0p9>;
405 vdd-s4-supply = <&vph_pwr>;
406
407 vreg_s4f_0p5: smps4 {
408 regulator-name = "vreg_s4f_0p5";
409 regulator-min-microvolt = <500000>;
410 regulator-max-microvolt = <700000>;
411 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
412 };
413
414 vreg_l1f_0p9: ldo1 {
415 regulator-name = "vreg_l1f_0p9";
416 regulator-min-microvolt = <912000>;
417 regulator-max-microvolt = <912000>;
418 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
419 };
420
421 vreg_l2f_0p88: ldo2 {
422 regulator-name = "vreg_l2f_0p88";
423 regulator-min-microvolt = <880000>;
424 regulator-max-microvolt = <912000>;
425 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
426 };
427
428 vreg_l3f_0p91: ldo3 {
429 regulator-name = "vreg_l3f_0p91";
430 regulator-min-microvolt = <880000>;
431 regulator-max-microvolt = <912000>;
432 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
433 };
434 };
435
436 regulators-5 {
437 compatible = "qcom,pm8550vs-rpmh-regulators";
438 qcom,pmic-id = "g";
439
440 vdd-l1-supply = <&vreg_s4g_1p3>;
441 vdd-l2-supply = <&vreg_s4g_1p3>;
442 vdd-l3-supply = <&vreg_s4g_1p3>;
443 vdd-s1-supply = <&vph_pwr>;
444 vdd-s2-supply = <&vph_pwr>;
445 vdd-s3-supply = <&vph_pwr>;
446 vdd-s4-supply = <&vph_pwr>;
447 vdd-s5-supply = <&vph_pwr>;
448 vdd-s6-supply = <&vph_pwr>;
449
450 vreg_s1g_1p2: smps1 {
451 regulator-name = "vreg_s1g_1p2";
452 regulator-min-microvolt = <1200000>;
453 regulator-max-microvolt = <1300000>;
454 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
455 };
456
457 vreg_s2g_0p8: smps2 {
458 regulator-name = "vreg_s2g_0p8";
459 regulator-min-microvolt = <800000>;
460 regulator-max-microvolt = <1000000>;
461 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
462 };
463
464 vreg_s3g_0p7: smps3 {
465 regulator-name = "vreg_s3g_0p7";
466 regulator-min-microvolt = <300000>;
467 regulator-max-microvolt = <1004000>;
468 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
469 };
470
471 vreg_s4g_1p3: smps4 {
472 regulator-name = "vreg_s4g_1p3";
473 regulator-min-microvolt = <1200000>;
474 regulator-max-microvolt = <1352000>;
475 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
476 };
477
478 vreg_s5g_0p8: smps5 {
479 regulator-name = "vreg_s5g_0p8";
480 regulator-min-microvolt = <500000>;
481 regulator-max-microvolt = <1004000>;
482 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
483 };
484
485 vreg_s6g_1p8: smps6 {
486 regulator-name = "vreg_s6g_1p8";
487 regulator-min-microvolt = <1800000>;
488 regulator-max-microvolt = <2000000>;
489 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
490 };
491
492 vreg_l1g_1p2: ldo1 {
493 regulator-name = "vreg_l1g_1p2";
494 regulator-min-microvolt = <1200000>;
495 regulator-max-microvolt = <1200000>;
496 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
497 };
498
499 vreg_l2g_1p2: ldo2 {
500 regulator-name = "vreg_l2g_1p2";
501 regulator-min-microvolt = <1200000>;
502 regulator-max-microvolt = <1200000>;
503 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
504 };
505
506 vreg_l3g_1p2: ldo3 {
507 regulator-name = "vreg_l3g_1p2";
508 regulator-min-microvolt = <1200000>;
509 regulator-max-microvolt = <1200000>;
510 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
511 };
512 };
513};
514
515&i2c_master_hub_0 {
516 status = "okay";
517};
518
519&i2c_hub_2 {
520 status = "okay";
521
522 typec-mux@42 {
523 compatible = "fcs,fsa4480";
524 reg = <0x42>;
525
526 vcc-supply = <&vreg_bob1>;
527
528 mode-switch;
529 orientation-switch;
530
531 port {
532 fsa4480_sbu_mux: endpoint {
533 remote-endpoint = <&pmic_glink_sbu>;
534 };
535 };
536 };
537};
538
539&lpass_tlmm {
540 spkr_1_sd_n_active: spkr-1-sd-n-active-state {
541 pins = "gpio17";
542 function = "gpio";
543 drive-strength = <16>;
544 bias-disable;
545 output-low;
546 };
547
548 spkr_2_sd_n_active: spkr-2-sd-n-active-state {
549 pins = "gpio18";
550 function = "gpio";
551 drive-strength = <16>;
552 bias-disable;
553 output-low;
554 };
555};
556
557&mdss {
558 status = "okay";
559};
560
561&mdss_dsi0 {
562 vdda-supply = <&vreg_l3e_1p2>;
563 status = "okay";
564
565 panel@0 {
566 compatible = "visionox,vtdr6130";
567 reg = <0>;
568
569 pinctrl-names = "default", "sleep";
570 pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>;
571 pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>;
572
573 vddio-supply = <&vreg_l12b_1p8>;
574 vci-supply = <&vreg_l13b_3p0>;
575 vdd-supply = <&vreg_l11b_1p2>;
576
577 reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
578
579 port {
580 panel0_in: endpoint {
581 remote-endpoint = <&mdss_dsi0_out>;
582 };
583 };
584 };
585};
586
587&mdss_dsi0_out {
588 remote-endpoint = <&panel0_in>;
589 data-lanes = <0 1 2 3>;
590};
591
592&mdss_dsi0_phy {
593 vdds-supply = <&vreg_l1e_0p88>;
594 status = "okay";
595};
596
597&mdss_dp0 {
598 status = "okay";
599};
600
601&mdss_dp0_out {
602 data-lanes = <0 1>;
603 remote-endpoint = <&usb_dp_qmpphy_dp_in>;
604};
605
606&pcie_1_phy_aux_clk {
607 clock-frequency = <1000>;
608};
609
610&pcie0 {
611 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
612 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
613
614 pinctrl-names = "default";
615 pinctrl-0 = <&pcie0_default_state>;
616
617 status = "okay";
618};
619
620&pcie0_phy {
621 vdda-phy-supply = <&vreg_l1e_0p88>;
622 vdda-pll-supply = <&vreg_l3e_1p2>;
623
624 status = "okay";
625};
626
627&pcie1 {
628 wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
629 perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
630
631 pinctrl-names = "default";
632 pinctrl-0 = <&pcie1_default_state>;
633
634 status = "okay";
635};
636
637&pcie1_phy {
638 vdda-phy-supply = <&vreg_l3c_0p91>;
639 vdda-pll-supply = <&vreg_l3e_1p2>;
640 vdda-qref-supply = <&vreg_l1e_0p88>;
641
642 status = "okay";
643};
644
645&pm8550_gpios {
646 sdc2_card_det_n: sdc2-card-det-state {
647 pins = "gpio12";
648 function = "normal";
649 input-enable;
650 output-disable;
651 bias-pull-up;
652 power-source = <1>; /* 1.8 V */
653 };
654};
655
656&pm8550b_eusb2_repeater {
657 vdd18-supply = <&vreg_l15b_1p8>;
658 vdd3-supply = <&vreg_l5b_3p1>;
659};
660
661&qupv3_id_0 {
662 status = "okay";
663};
664
665&remoteproc_adsp {
666 firmware-name = "qcom/sm8550/adsp.mbn",
667 "qcom/sm8550/adsp_dtb.mbn";
668 status = "okay";
669};
670
671&remoteproc_cdsp {
672 firmware-name = "qcom/sm8550/cdsp.mbn",
673 "qcom/sm8550/cdsp_dtb.mbn";
674 status = "okay";
675};
676
677&remoteproc_mpss {
678 firmware-name = "qcom/sm8550/modem.mbn",
679 "qcom/sm8550/modem_dtb.mbn";
680 status = "okay";
681};
682
683&sdhc_2 {
684 cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;
685 pinctrl-names = "default", "sleep";
686 pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
687 pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
688 vmmc-supply = <&vreg_l9b_2p9>;
689 vqmmc-supply = <&vreg_l8b_1p8>;
690 bus-width = <4>;
691 no-sdio;
692 no-mmc;
693 status = "okay";
694};
695
696&sleep_clk {
697 clock-frequency = <32000>;
698};
699
700&swr0 {
701 status = "okay";
702
703 /* WSA8845 */
704 left_spkr: speaker@0,0 {
705 compatible = "sdw20217020400";
706 reg = <0 0>;
707 pinctrl-names = "default";
708 pinctrl-0 = <&spkr_1_sd_n_active>;
709 powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>;
710 #sound-dai-cells = <0>;
711 sound-name-prefix = "SpkrLeft";
712 vdd-1p8-supply = <&vreg_l15b_1p8>;
713 vdd-io-supply = <&vreg_l3g_1p2>;
714 };
715
716 /* WSA8845 */
717 right_spkr: speaker@0,1 {
718 compatible = "sdw20217020400";
719 reg = <0 1>;
720 pinctrl-names = "default";
721 pinctrl-0 = <&spkr_2_sd_n_active>;
722 powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
723 #sound-dai-cells = <0>;
724 sound-name-prefix = "SpkrRight";
725 vdd-1p8-supply = <&vreg_l15b_1p8>;
726 vdd-io-supply = <&vreg_l3g_1p2>;
727 };
728};
729
730&swr1 {
731 status = "okay";
732
733 /* WCD9385 RX */
734 wcd_rx: codec@0,4 {
735 compatible = "sdw20217010d00";
736 reg = <0 4>;
737 qcom,rx-port-mapping = <1 2 3 4 5>;
738 };
739};
740
741&swr2 {
742 status = "okay";
743
744 /* WCD9385 TX */
745 wcd_tx: codec@0,3 {
746 compatible = "sdw20217010d00";
747 reg = <0 3>;
748 qcom,tx-port-mapping = <1 1 2 3>;
749 };
750};
751
752&tlmm {
753 gpio-reserved-ranges = <32 8>;
754
755 sde_dsi_active: sde-dsi-active-state {
756 pins = "gpio133";
757 function = "gpio";
758 drive-strength = <8>;
759 bias-disable;
760 };
761
762 sde_dsi_suspend: sde-dsi-suspend-state {
763 pins = "gpio133";
764 function = "gpio";
765 drive-strength = <2>;
766 bias-pull-down;
767 };
768
769 sde_te_active: sde-te-active-state {
770 pins = "gpio86";
771 function = "mdp_vsync";
772 drive-strength = <2>;
773 bias-pull-down;
774 };
775
776 sde_te_suspend: sde-te-suspend-state {
777 pins = "gpio86";
778 function = "mdp_vsync";
779 drive-strength = <2>;
780 bias-pull-down;
781 };
782
783 wcd_default: wcd-reset-n-active-state {
784 pins = "gpio108";
785 function = "gpio";
786 drive-strength = <16>;
787 bias-disable;
788 output-low;
789 };
790};
791
792&uart7 {
793 status = "okay";
794};
795
796&ufs_mem_hc {
797 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
798 vcc-supply = <&vreg_l17b_2p5>;
799 vcc-max-microamp = <1300000>;
800 vccq-supply = <&vreg_l1g_1p2>;
801 vccq-max-microamp = <1200000>;
802 vdd-hba-supply = <&vreg_l3g_1p2>;
803
804 status = "okay";
805};
806
807&ufs_mem_phy {
808 vdda-phy-supply = <&vreg_l1d_0p88>;
809 vdda-pll-supply = <&vreg_l3e_1p2>;
810
811 status = "okay";
812};
813
814&usb_1 {
815 status = "okay";
816};
817
818&usb_1_dwc3 {
819 dr_mode = "otg";
820 usb-role-switch;
821};
822
823&usb_1_dwc3_hs {
824 remote-endpoint = <&pmic_glink_hs_in>;
825};
826
827&usb_1_dwc3_ss {
828 remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
829};
830
831&usb_1_hsphy {
832 vdd-supply = <&vreg_l1e_0p88>;
833 vdda12-supply = <&vreg_l3e_1p2>;
834
835 phys = <&pm8550b_eusb2_repeater>;
836
837 status = "okay";
838};
839
840&usb_dp_qmpphy {
841 vdda-phy-supply = <&vreg_l3e_1p2>;
842 vdda-pll-supply = <&vreg_l3f_0p91>;
843
844 orientation-switch;
845
846 status = "okay";
847};
848
849&usb_dp_qmpphy_dp_in {
850 remote-endpoint = <&mdss_dp0_out>;
851};
852
853&usb_dp_qmpphy_out {
854 remote-endpoint = <&pmic_glink_ss_in>;
855};
856
857&usb_dp_qmpphy_usb_ss_in {
858 remote-endpoint = <&usb_1_dwc3_ss>;
859};
860
861&xo_board {
862 clock-frequency = <76800000>;
863};