Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 53633a893a06bd5a0c807287d9cc29337806eaf7 / . / src / arm64 / qcom / sm8150-hdk.dts
blob: bb161b536da466098aa75c4d5d9e8875697a002d [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame^]1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2020, The Linux Foundation. All rights reserved.
4 */
5
6/dts-v1/;
7
8#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
9#include <dt-bindings/gpio/gpio.h>
10#include "sm8150.dtsi"
11#include "pm8150.dtsi"
12#include "pm8150b.dtsi"
13#include "pm8150l.dtsi"
14
15/ {
16 model = "Qualcomm Technologies, Inc. SM8150 HDK";
17 compatible = "qcom,sm8150-hdk", "qcom,sm8150";
18 chassis-type = "embedded";
19
20 aliases {
21 serial0 = &uart2;
22 };
23
24 chosen {
25 stdout-path = "serial0:115200n8";
26 };
27
28 vph_pwr: vph-pwr-regulator {
29 compatible = "regulator-fixed";
30 regulator-name = "vph_pwr";
31 regulator-min-microvolt = <3700000>;
32 regulator-max-microvolt = <3700000>;
33 };
34
35 vreg_s4a_1p8: pm8150-s4 {
36 compatible = "regulator-fixed";
37 regulator-name = "vreg_s4a_1p8";
38
39 regulator-min-microvolt = <1800000>;
40 regulator-max-microvolt = <1800000>;
41
42 regulator-always-on;
43 regulator-boot-on;
44
45 vin-supply = <&vph_pwr>;
46 };
47
48 gpio-keys {
49 compatible = "gpio-keys";
50
51 key-vol-up {
52 label = "Volume Up";
53 linux,code = <KEY_VOLUMEUP>;
54 gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
55 };
56 };
57};
58
59&apps_rsc {
60 regulators-0 {
61 compatible = "qcom,pm8150-rpmh-regulators";
62 qcom,pmic-id = "a";
63
64 vdd-s1-supply = <&vph_pwr>;
65 vdd-s2-supply = <&vph_pwr>;
66 vdd-s3-supply = <&vph_pwr>;
67 vdd-s4-supply = <&vph_pwr>;
68 vdd-s5-supply = <&vph_pwr>;
69 vdd-s6-supply = <&vph_pwr>;
70 vdd-s7-supply = <&vph_pwr>;
71 vdd-s8-supply = <&vph_pwr>;
72 vdd-s9-supply = <&vph_pwr>;
73 vdd-s10-supply = <&vph_pwr>;
74
75 vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
76 vdd-l2-l10-supply = <&vreg_bob>;
77 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>;
78 vdd-l6-l9-supply = <&vreg_s8c_1p3>;
79 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
80 vdd-l13-l16-l17-supply = <&vreg_bob>;
81
82 vreg_s5a_2p0: smps5 {
83 regulator-min-microvolt = <1904000>;
84 regulator-max-microvolt = <2000000>;
85 };
86
87 vreg_s6a_0p9: smps6 {
88 regulator-min-microvolt = <920000>;
89 regulator-max-microvolt = <1128000>;
90 };
91
92 vdda_wcss_pll:
93 vreg_l1a_0p75: ldo1 {
94 regulator-min-microvolt = <752000>;
95 regulator-max-microvolt = <752000>;
96 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
97 };
98
99 vdd_pdphy:
100 vdda_usb_hs_3p1:
101 vreg_l2a_3p1: ldo2 {
102 regulator-min-microvolt = <3072000>;
103 regulator-max-microvolt = <3072000>;
104 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
105 };
106
107 vreg_l3a_0p8: ldo3 {
108 regulator-min-microvolt = <480000>;
109 regulator-max-microvolt = <932000>;
110 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
111 };
112
113 vdd_usb_hs_core:
114 vdda_csi_0_0p9:
115 vdda_csi_1_0p9:
116 vdda_csi_2_0p9:
117 vdda_csi_3_0p9:
118 vdda_dsi_0_0p9:
119 vdda_dsi_1_0p9:
120 vdda_dsi_0_pll_0p9:
121 vdda_dsi_1_pll_0p9:
122 vdda_pcie_1ln_core:
123 vdda_pcie_2ln_core:
124 vdda_pll_hv_cc_ebi01:
125 vdda_pll_hv_cc_ebi23:
126 vdda_qrefs_0p875_5:
127 vdda_sp_sensor:
128 vdda_ufs_2ln_core_1:
129 vdda_ufs_2ln_core_2:
130 vdda_usb_ss_dp_core_1:
131 vdda_usb_ss_dp_core_2:
132 vdda_qlink_lv:
133 vdda_qlink_lv_ck:
134 vreg_l5a_0p875: ldo5 {
135 regulator-min-microvolt = <880000>;
136 regulator-max-microvolt = <880000>;
137 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
138 };
139
140 vreg_l6a_1p2: ldo6 {
141 regulator-min-microvolt = <1200000>;
142 regulator-max-microvolt = <1200000>;
143 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
144 };
145
146 vreg_l7a_1p8: ldo7 {
147 regulator-min-microvolt = <1800000>;
148 regulator-max-microvolt = <1800000>;
149 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
150 };
151
152 vddpx_10:
153 vreg_l9a_1p2: ldo9 {
154 regulator-min-microvolt = <1200000>;
155 regulator-max-microvolt = <1200000>;
156 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
157 };
158
159 vreg_l10a_2p5: ldo10 {
160 regulator-min-microvolt = <2504000>;
161 regulator-max-microvolt = <2960000>;
162 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
163 };
164
165 vreg_l11a_0p8: ldo11 {
166 regulator-min-microvolt = <800000>;
167 regulator-max-microvolt = <800000>;
168 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
169 };
170
171 vdd_qfprom:
172 vdd_qfprom_sp:
173 vdda_apc_cs_1p8:
174 vdda_gfx_cs_1p8:
175 vdda_usb_hs_1p8:
176 vdda_qrefs_vref_1p8:
177 vddpx_10_a:
178 vreg_l12a_1p8: ldo12 {
179 regulator-min-microvolt = <1800000>;
180 regulator-max-microvolt = <1800000>;
181 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
182 };
183
184 vreg_l13a_2p7: ldo13 {
185 regulator-min-microvolt = <2704000>;
186 regulator-max-microvolt = <2704000>;
187 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
188 };
189
190 vreg_l14a_1p8: ldo14 {
191 regulator-min-microvolt = <1800000>;
192 regulator-max-microvolt = <1880000>;
193 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
194 };
195
196 vreg_l15a_1p7: ldo15 {
197 regulator-min-microvolt = <1704000>;
198 regulator-max-microvolt = <1704000>;
199 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
200 };
201
202 vreg_l16a_2p7: ldo16 {
203 regulator-min-microvolt = <2704000>;
204 regulator-max-microvolt = <2960000>;
205 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
206 };
207
208 vreg_l17a_3p0: ldo17 {
209 regulator-min-microvolt = <2856000>;
210 regulator-max-microvolt = <3008000>;
211 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
212 };
213 };
214
215 regulators-1 {
216 compatible = "qcom,pm8150l-rpmh-regulators";
217 qcom,pmic-id = "c";
218
219 vdd-s1-supply = <&vph_pwr>;
220 vdd-s2-supply = <&vph_pwr>;
221 vdd-s3-supply = <&vph_pwr>;
222 vdd-s4-supply = <&vph_pwr>;
223 vdd-s5-supply = <&vph_pwr>;
224 vdd-s6-supply = <&vph_pwr>;
225 vdd-s7-supply = <&vph_pwr>;
226 vdd-s8-supply = <&vph_pwr>;
227
228 vdd-l1-l8-supply = <&vreg_s4a_1p8>;
229 vdd-l2-l3-supply = <&vreg_s8c_1p3>;
230 vdd-l4-l5-l6-supply = <&vreg_bob>;
231 vdd-l7-l11-supply = <&vreg_bob>;
232 vdd-l9-l10-supply = <&vreg_bob>;
233
234 vdd-bob-supply = <&vph_pwr>;
235 vdd-flash-supply = <&vreg_bob>;
236 vdd-rgb-supply = <&vreg_bob>;
237
238 vreg_bob: bob {
239 regulator-min-microvolt = <3008000>;
240 regulator-max-microvolt = <4000000>;
241 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
242 regulator-allow-bypass;
243 };
244
245 vreg_s8c_1p3: smps8 {
246 regulator-min-microvolt = <1352000>;
247 regulator-max-microvolt = <1352000>;
248 };
249
250 vreg_l1c_1p8: ldo1 {
251 regulator-min-microvolt = <1800000>;
252 regulator-max-microvolt = <1800000>;
253 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
254 };
255
256 vdda_wcss_adcdac_1:
257 vdda_wcss_adcdac_22:
258 vreg_l2c_1p3: ldo2 {
259 regulator-min-microvolt = <1304000>;
260 regulator-max-microvolt = <1304000>;
261 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
262 };
263
264 vdda_hv_ebi0:
265 vdda_hv_ebi1:
266 vdda_hv_ebi2:
267 vdda_hv_ebi3:
268 vdda_hv_refgen0:
269 vdda_qlink_hv_ck:
270 vreg_l3c_1p2: ldo3 {
271 regulator-min-microvolt = <1200000>;
272 regulator-max-microvolt = <1200000>;
273 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
274 };
275
276 vddpx_5:
277 vreg_l4c_1p8: ldo4 {
278 regulator-min-microvolt = <1704000>;
279 regulator-max-microvolt = <2928000>;
280 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
281 };
282
283 vddpx_6:
284 vreg_l5c_1p8: ldo5 {
285 regulator-min-microvolt = <1704000>;
286 regulator-max-microvolt = <2928000>;
287 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
288 };
289
290 vddpx_2:
291 vreg_l6c_2p9: ldo6 {
292 regulator-min-microvolt = <1800000>;
293 regulator-max-microvolt = <2960000>;
294 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
295 };
296
297 vreg_l7c_3p0: ldo7 {
298 regulator-min-microvolt = <2856000>;
299 regulator-max-microvolt = <3104000>;
300 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
301 };
302
303 vreg_l8c_1p8: ldo8 {
304 regulator-min-microvolt = <1800000>;
305 regulator-max-microvolt = <1800000>;
306 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
307 };
308
309 vreg_l9c_2p9: ldo9 {
310 regulator-min-microvolt = <2704000>;
311 regulator-max-microvolt = <2960000>;
312 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
313 };
314
315 vreg_l10c_3p3: ldo10 {
316 regulator-min-microvolt = <3000000>;
317 regulator-max-microvolt = <3312000>;
318 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
319 };
320
321 vreg_l11c_3p3: ldo11 {
322 regulator-min-microvolt = <3000000>;
323 regulator-max-microvolt = <3312000>;
324 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
325 };
326 };
327
328 regulators-2 {
329 compatible = "qcom,pm8009-rpmh-regulators";
330 qcom,pmic-id = "f";
331
332 vdd-s1-supply = <&vph_pwr>;
333 vdd-s2-supply = <&vreg_bob>;
334
335 vdd-l2-supply = <&vreg_s8c_1p3>;
336 vdd-l5-l6-supply = <&vreg_bob>;
337
338 vreg_l2f_1p2: ldo2 {
339 regulator-min-microvolt = <1200000>;
340 regulator-max-microvolt = <1200000>;
341 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
342 };
343
344 vreg_l5f_2p85: ldo5 {
345 regulator-min-microvolt = <2800000>;
346 regulator-max-microvolt = <2800000>;
347 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
348 };
349
350 vreg_l6f_2p85: ldo6 {
351 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
352 regulator-min-microvolt = <2856000>;
353 regulator-max-microvolt = <2856000>;
354 };
355 };
356};
357
358&gmu {
359 status = "okay";
360};
361
362&gpu {
363 /*
364 * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it
365 * after display support is added on this board.
366 */
367 compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon";
368 status = "okay";
369};
370
371&pon_pwrkey {
372 status = "okay";
373};
374
375&pon_resin {
376 status = "okay";
377
378 linux,code = <KEY_VOLUMEDOWN>;
379};
380
381&qupv3_id_1 {
382 status = "okay";
383};
384
385&remoteproc_adsp {
386 status = "okay";
387
388 firmware-name = "qcom/sm8150/adsp.mbn";
389};
390
391&remoteproc_cdsp {
392 status = "okay";
393
394 firmware-name = "qcom/sm8150/cdsp.mbn";
395};
396
397&remoteproc_slpi {
398 status = "okay";
399
400 firmware-name = "qcom/sm8150/slpi.mbn";
401};
402
403&tlmm {
404 gpio-reserved-ranges = <0 4>, <126 4>;
405};
406
407&uart2 {
408 status = "okay";
409};
410
411&ufs_mem_hc {
412 status = "okay";
413
414 reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
415
416 vcc-supply = <&vreg_l10a_2p5>;
417 vcc-max-microamp = <750000>;
418 vccq-supply = <&vreg_l9a_1p2>;
419 vccq-max-microamp = <700000>;
420 vccq2-supply = <&vreg_s4a_1p8>;
421 vccq2-max-microamp = <750000>;
422};
423
424&ufs_mem_phy {
425 status = "okay";
426
427 vdda-phy-supply = <&vdda_ufs_2ln_core_1>;
428 vdda-pll-supply = <&vreg_l3c_1p2>;
429};
430
431&usb_1_hsphy {
432 status = "okay";
433 vdda-pll-supply = <&vdd_usb_hs_core>;
434 vdda33-supply = <&vdda_usb_hs_3p1>;
435 vdda18-supply = <&vdda_usb_hs_1p8>;
436};
437
438&usb_2_hsphy {
439 status = "okay";
440 vdda-pll-supply = <&vdd_usb_hs_core>;
441 vdda33-supply = <&vdda_usb_hs_3p1>;
442 vdda18-supply = <&vdda_usb_hs_1p8>;
443};
444
445&usb_1_qmpphy {
446 status = "okay";
447 vdda-phy-supply = <&vreg_l3c_1p2>;
448 vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
449};
450
451&usb_2_qmpphy {
452 status = "okay";
453 vdda-phy-supply = <&vreg_l3c_1p2>;
454 vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
455};
456
457&usb_1 {
458 status = "okay";
459};
460
461&usb_2 {
462 status = "okay";
463};
464
465&usb_1_dwc3 {
466 dr_mode = "peripheral";
467};
468
469&usb_2_dwc3 {
470 dr_mode = "host";
471};