Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 53633a893a06bd5a0c807287d9cc29337806eaf7 / . / src / arm64 / qcom / msm8996-sony-xperia-tone.dtsi
blob: d55e4075040ffc8223a03f0691c37985b7c7e858 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame^]1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2021, AngeloGioacchino Del Regno
4 * <angelogioacchino.delregno@somainline.org>
5 * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
6 */
7
8#include "msm8996.dtsi"
9#include "pm8994.dtsi"
10#include "pmi8994.dtsi"
11#include "pmi8996.dtsi"
12#include <dt-bindings/input/input.h>
13#include <dt-bindings/gpio/gpio.h>
14#include <dt-bindings/leds/common.h>
15#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
16#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
17
18/delete-node/ &adsp_mem;
19/delete-node/ &slpi_mem;
20/delete-node/ &venus_mem;
21/delete-node/ &gpu_mem;
22
23/ {
24 qcom,msm-id = <246 0x30001>; /* MSM8996 V3.1 (Final) */
25 qcom,board-id = <8 0>;
26
27 chosen {
28 bootargs = "maxcpus=2";
29 };
30
31 reserved-memory {
32 ramoops@a7f00000 {
33 compatible = "ramoops";
34 reg = <0 0xa7f00000 0 0x100000>;
35 record-size = <0x20000>;
36 console-size = <0x40000>;
37 ftrace-size = <0x20000>;
38 pmsg-size = <0x20000>;
39 ecc-size = <16>;
40 };
41
42 adsp_mem: adsp@8ea00000 {
43 reg = <0x0 0x8ea00000 0x0 0x1a00000>;
44 no-map;
45 };
46
47 gpu_mem: gpu@90400000 {
48 compatible = "shared-dma-pool";
49 reg = <0x0 0x90400000 0x0 0x2000>;
50 no-map;
51 };
52
53 slpi_mem: memory@90500000 {
54 reg = <0 0x90500000 0 0xa00000>;
55 no-map;
56 };
57
58 venus_mem: memory@90f00000 {
59 reg = <0 0x90f00000 0 0x500000>;
60 no-map;
61 };
62 };
63
64 panel_tvdd: tvdd-regulator {
65 compatible = "regulator-fixed";
66 regulator-name = "panel_tvdd";
67 gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
68 pinctrl-0 = <&tp_vddio_en>;
69 pinctrl-names = "default";
70 };
71
72 usb3_id: usb3-id {
73 compatible = "linux,extcon-usb-gpio";
74 id-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
75 pinctrl-names = "default";
76 pinctrl-0 = <&usb_detect>;
77 };
78
79 vph_pwr: vph-pwr-regulator {
80 compatible = "regulator-fixed";
81 regulator-min-microvolt = <3700000>;
82 regulator-max-microvolt = <3700000>;
83 regulator-name = "vph_pwr";
84 regulator-always-on;
85 regulator-boot-on;
86 };
87
88 wlan_en: wlan-en-1-8v {
89 compatible = "regulator-fixed";
90 regulator-name = "wlan-en-regulator";
91 regulator-min-microvolt = <1800000>;
92 regulator-max-microvolt = <1800000>;
93 gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
94 pinctrl-names = "default";
95 pinctrl-0 = <&wl_reg_on>;
96
97 /* WLAN card specific delay */
98 startup-delay-us = <70000>;
99 enable-active-high;
100 };
101};
102
103&blsp1_i2c3 {
104 clock-frequency = <355000>;
105 status = "okay";
106
107 tof_sensor: vl53l0x@29 {
108 compatible = "st,vl53l0x";
109 reg = <0x29>;
110 };
111};
112
113&blsp1_uart2 {
114 status = "okay";
115};
116
117&blsp2_i2c5 {
118 clock-frequency = <355000>;
119 status = "okay";
120
121 /* FUSB301 USB-C controller */
122};
123
124&blsp2_i2c6 {
125 clock-frequency = <355000>;
126 status = "okay";
127
128 synaptics@2c {
129 compatible = "syna,rmi4-i2c";
130 reg = <0x2c>;
131 interrupt-parent = <&tlmm>;
132 interrupts = <125 IRQ_TYPE_EDGE_FALLING>;
133 vdd-supply = <&panel_tvdd>;
134
135 syna,reset-delay-ms = <220>;
136 syna,startup-delay-ms = <220>;
137 #address-cells = <1>;
138 #size-cells = <0>;
139
140 rmi4-f01@1 {
141 reg = <0x1>;
142 syna,nosleep-mode = <1>;
143 };
144
145 rmi4-f11@11 {
146 reg = <0x11>;
147 syna,sensor-type = <1>;
148 };
149 };
150};
151
152&blsp2_uart2 {
153 status = "okay";
154};
155
156&camera0_mclk {
157 drive-strength = <2>;
158 output-low;
159};
160
161&camera0_pwdn {
162 drive-strength = <2>;
163 output-low;
164};
165
166&camera0_rst {
167 pins = "gpio30";
168 drive-strength = <2>;
169 output-low;
170};
171
172&camera2_mclk {
173 drive-strength = <2>;
174 output-low;
175};
176
177&camera2_rst {
178 drive-strength = <2>;
179 output-low;
180};
181
182&hsusb_phy1 {
183 vdd-supply = <&pm8994_l28>;
184 vdda-pll-supply = <&pm8994_l12>;
185 vdda-phy-dpdm-supply = <&pm8994_l24>;
186 status = "okay";
187};
188
189&mmcc {
190 vdd-gfx-supply = <&vdd_gfx>;
191};
192
193&pcie0 {
194 perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
195 wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
196 vddpe-3v3-supply = <&wlan_en>;
197 vdda-supply = <&pm8994_l28>;
198 status = "okay";
199};
200
201&pcie_phy {
202 vdda-phy-supply = <&pm8994_l28>;
203 vdda-pll-supply = <&pm8994_l12>;
204 status = "okay";
205};
206
207&pm8994_gpios {
208 pinctrl-names = "default";
209 pinctrl-0 = <&pm8994_gpios_defaults>;
210 gpio-line-names =
211 "NC",
212 "VOL_DOWN_N",
213 "VOL_UP_N",
214 "SNAPSHOT_N",
215 "FOCUS_N",
216 "NC",
217 "NFC_VEN",
218 "NC",
219 "NC",
220 "NC",
221 "NC",
222 "NC",
223 "EAR_EN",
224 "NC",
225 "PM_DIVCLK1",
226 "PMI_CLK",
227 "NC",
228 "WL_SLEEP_CLK",
229 "NC",
230 "PMIC_SPON",
231 "UIM_BATT_ALARM",
232 "PMK_SLEEP_CLK";
233
234 /*
235 * We don't yet know for sure which GPIOs are of our interest, but what
236 * we do know is that if a vendor sets the pins to a non-default state, there's
237 * probably a reason for it, and just to be on the safe side, we follow suit.
238 */
239 pm8994_gpios_defaults: pm8994-gpios-default-state {
240 pm8994-gpio1-nc-pins {
241 pins = "gpio1";
242 function = PMIC_GPIO_FUNC_NORMAL;
243 drive-push-pull;
244 bias-high-impedance;
245 };
246
247 vol-down-n-pins {
248 pins = "gpio2";
249 function = PMIC_GPIO_FUNC_NORMAL;
250 drive-push-pull;
251 input-enable;
252 bias-pull-up;
253 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
254 power-source = <PM8994_GPIO_S4>;
255 };
256
257 vol-up-n-pins {
258 pins = "gpio3";
259 function = PMIC_GPIO_FUNC_NORMAL;
260 drive-push-pull;
261 input-enable;
262 bias-pull-up;
263 power-source = <PM8994_GPIO_S4>;
264 };
265
266 camera-snapshot-n-pins {
267 pins = "gpio4";
268 function = PMIC_GPIO_FUNC_NORMAL;
269 drive-push-pull;
270 input-enable;
271 bias-pull-up;
272 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
273 power-source = <PM8994_GPIO_S4>;
274 };
275
276 camera-focus-n-pins {
277 pins = "gpio5";
278 function = PMIC_GPIO_FUNC_NORMAL;
279 drive-push-pull;
280 input-enable;
281 bias-pull-up;
282 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
283 power-source = <PM8994_GPIO_S4>;
284 };
285
286 pm8994-gpio6-nc-pins {
287 pins = "gpio6";
288 function = PMIC_GPIO_FUNC_NORMAL;
289 drive-push-pull;
290 bias-high-impedance;
291 power-source = <PM8994_GPIO_VPH>;
292 };
293
294 nfc-download-pins {
295 pins = "gpio7";
296 function = PMIC_GPIO_FUNC_NORMAL;
297 output-low;
298 drive-push-pull;
299 bias-disable;
300 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
301 power-source = <PM8994_GPIO_S4>;
302 };
303
304 pm8994-gpio8-nc-pins {
305 pins = "gpio8";
306 function = PMIC_GPIO_FUNC_NORMAL;
307 output-low;
308 drive-push-pull;
309 bias-high-impedance;
310 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
311 power-source = <PM8994_GPIO_VPH>;
312 };
313
314 pm8994-gpio9-nc-pins {
315 pins = "gpio9";
316 function = PMIC_GPIO_FUNC_NORMAL;
317 output-high;
318 drive-push-pull;
319 bias-high-impedance;
320 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
321 power-source = <PM8994_GPIO_VPH>;
322 };
323
324 nfc-clock-pins {
325 pins = "gpio10";
326 function = PMIC_GPIO_FUNC_NORMAL;
327 input-enable;
328 drive-push-pull;
329 bias-pull-down;
330 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
331 power-source = <PM8994_GPIO_S4>;
332 };
333
334 pm8994-gpio11-nc-pins {
335 pins = "gpio11";
336 function = PMIC_GPIO_FUNC_NORMAL;
337 drive-push-pull;
338 bias-high-impedance;
339 power-source = <PM8994_GPIO_VPH>;
340 };
341
342 pm8994-gpio12-nc-pins {
343 pins = "gpio12";
344 function = PMIC_GPIO_FUNC_NORMAL;
345 drive-push-pull;
346 bias-high-impedance;
347 power-source = <PM8994_GPIO_VPH>;
348 };
349
350 ear-enable-pins {
351 pins = "gpio13";
352 function = PMIC_GPIO_FUNC_NORMAL;
353 output-high;
354 drive-push-pull;
355 bias-disable;
356 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
357 power-source = <PM8994_GPIO_S4>;
358 };
359
360 pm8994-gpio14-nc-pins {
361 pins = "gpio14";
362 function = PMIC_GPIO_FUNC_NORMAL;
363 drive-push-pull;
364 input-enable;
365 bias-high-impedance;
366 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
367 power-source = <PM8994_GPIO_VPH>;
368 };
369
370 pm-divclk1-gpio-pins {
371 pins = "gpio15";
372 function = "func1";
373 output-high;
374 drive-push-pull;
375 bias-high-impedance;
376 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
377 power-source = <PM8994_GPIO_VPH>;
378 };
379
380 pmi-clk-gpio-pins {
381 pins = "gpio16";
382 function = PMIC_GPIO_FUNC_NORMAL;
383 drive-push-pull;
384 };
385
386 pm8994-gpio17-nc-pins {
387 pins = "gpio17";
388 function = PMIC_GPIO_FUNC_NORMAL;
389 drive-push-pull;
390 bias-high-impedance;
391 power-source = <PM8994_GPIO_VPH>;
392 };
393
394 rome-sleep-pins {
395 pins = "gpio18";
396 function = PMIC_GPIO_FUNC_FUNC2;
397 output-low;
398 drive-push-pull;
399 bias-disable;
400 qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>;
401 power-source = <PM8994_GPIO_S4>;
402 };
403
404 pm8994-gpio19-nc-pins {
405 pins = "gpio19";
406 function = PMIC_GPIO_FUNC_NORMAL;
407 output-low;
408 drive-push-pull;
409 bias-high-impedance;
410 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
411 power-source = <PM8994_GPIO_VPH>;
412 };
413
414 pm8994-gpio22-nc-pins {
415 pins = "gpio22";
416 function = PMIC_GPIO_FUNC_NORMAL;
417 drive-push-pull;
418 bias-high-impedance;
419 power-source = <PM8994_GPIO_VPH>;
420 };
421 };
422};
423
424&pm8994_mpps {
425 pinctrl-names = "default";
426 pinctrl-0 = <&pm8994_mpps_defaults>;
427
428 gpio-line-names =
429 "SDC_UIM_VBIAS",
430 "LCD_ID_ADC",
431 "VREF_DACX",
432 "NC",
433 "FLASH_THERM",
434 "NC",
435 "NC",
436 "RF_ID";
437
438 pm8994_mpps_defaults: pm8994-mpps-default-state {
439 lcd-id_adc-mpp-pins {
440 pins = "mpp2";
441 function = "analog";
442 input-enable;
443 qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH6>;
444 };
445
446 pm-mpp4-nc-pins {
447 pins = "mpp4";
448 function = "digital";
449 bias-high-impedance;
450 power-source = <PM8994_GPIO_VPH>;
451 };
452
453 flash-therm-mpp-pins {
454 pins = "mpp5";
455 function = "analog";
456 input-enable;
457 qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
458 };
459
460 mpp6-nc-pins {
461 pins = "mpp6";
462 function = "digital";
463 bias-high-impedance;
464 };
465
466 rf-id-mpp-pins {
467 pins = "mpp8";
468 function = "analog";
469 input-enable;
470 qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH8>;
471 };
472 };
473};
474
475&pm8994_resin {
476 linux,code = <KEY_VOLUMEUP>;
477 status = "okay";
478};
479
480&pmi8994_gpios {
481 pinctrl-names = "default";
482 pinctrl-0 = <&pmi8994_gpios_defaults>;
483
484 gpio-line-names =
485 "VIB_LDO_EN",
486 "NC",
487 "NC",
488 "NC",
489 "NC",
490 "NC",
491 "NC",
492 "NC",
493 "USB_SWITCH_SEL",
494 "NC";
495
496 pmi8994_gpios_defaults: pmi8994-gpios-default-state {
497 vib-ldo-en-gpio-pins {
498 pins = "gpio1";
499 function = PMIC_GPIO_FUNC_NORMAL;
500 drive-push-pull;
501 output-low;
502 bias-disable;
503 power-source = <PM8994_GPIO_S4>;
504 };
505
506 pmi-gpio2-nc-pins {
507 pins = "gpio2";
508 function = PMIC_GPIO_FUNC_NORMAL;
509 drive-push-pull;
510 input-enable;
511 bias-high-impedance;
512 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
513 power-source = <PM8994_GPIO_VPH>;
514 };
515
516 pmi-gpio3-nc-pins {
517 pins = "gpio3";
518 function = PMIC_GPIO_FUNC_NORMAL;
519 drive-push-pull;
520 input-enable;
521 bias-high-impedance;
522 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
523 power-source = <PM8994_GPIO_VPH>;
524 };
525
526 pmi-gpio4-nc-pins {
527 pins = "gpio4";
528 function = PMIC_GPIO_FUNC_NORMAL;
529 drive-push-pull;
530 output-high;
531 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
532 power-source = <PM8994_GPIO_S4>;
533 };
534
535 pmi-gpio5-nc-pins {
536 pins = "gpio5";
537 function = PMIC_GPIO_FUNC_NORMAL;
538 drive-push-pull;
539 output-high;
540 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
541 power-source = <PM8994_GPIO_S4>;
542 };
543
544 pmi-gpio6-nc-pins {
545 pins = "gpio6";
546 function = PMIC_GPIO_FUNC_NORMAL;
547 drive-push-pull;
548 output-high;
549 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
550 power-source = <PM8994_GPIO_S4>;
551 };
552
553 pmi-gpio7-nc-pins {
554 pins = "gpio7";
555 function = PMIC_GPIO_FUNC_NORMAL;
556 drive-push-pull;
557 output-high;
558 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
559 power-source = <PM8994_GPIO_S4>;
560 };
561
562 pmi-gpio8-nc-pins {
563 pins = "gpio8";
564 function = PMIC_GPIO_FUNC_NORMAL;
565 drive-push-pull;
566 output-high;
567 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
568 power-source = <PM8994_GPIO_S4>;
569 };
570
571 usb-switch-sel-pins {
572 pins = "gpio9";
573 function = PMIC_GPIO_FUNC_NORMAL;
574 drive-push-pull;
575 };
576
577 pmi-gpio10-nc-pins {
578 pins = "gpio10";
579 function = PMIC_GPIO_FUNC_NORMAL;
580 output-low;
581 drive-push-pull;
582 bias-disable;
583 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
584 power-source = <PM8994_GPIO_S4>;
585 };
586 };
587};
588
589&pm8994_spmi_regulators {
590 qcom,saw-reg = <&saw3>;
591
592 pm8994_s9: s9 {
593 qcom,saw-slave;
594 };
595
596 pm8994_s10: s10 {
597 qcom,saw-slave;
598 };
599
600 pm8994_s11: s11 {
601 qcom,saw-leader;
602 regulator-name = "vdd_apcc";
603 regulator-always-on;
604 regulator-min-microvolt = <470000>;
605 regulator-max-microvolt = <1140000>;
606 };
607};
608
609&pmi8994_lpg {
610 qcom,power-source = <1>;
611 status = "okay";
612
613 multi-led {
614 color = <LED_COLOR_ID_RGB>;
615 function = LED_FUNCTION_STATUS;
616
617 #address-cells = <1>;
618 #size-cells = <0>;
619
620 led@1 {
621 reg = <1>;
622 color = <LED_COLOR_ID_BLUE>;
623 };
624
625 led@2 {
626 reg = <2>;
627 color = <LED_COLOR_ID_GREEN>;
628 };
629
630 led@3 {
631 reg = <3>;
632 color = <LED_COLOR_ID_RED>;
633 };
634 };
635};
636
637&pmi8994_spmi_regulators {
638 vdd_gfx:
639 pmi8994_s2: s2 {
640 /* Pinned to a high value for now to avoid random crashes. */
641 regulator-min-microvolt = <1015000>;
642 regulator-max-microvolt = <1015000>;
643 regulator-name = "vdd_gfx";
644 regulator-always-on;
645 };
646};
647
648&pmi8994_wled {
649 default-brightness = <512>;
650 qcom,num-strings = <3>;
651 status = "okay";
652};
653
654&rpm_requests {
655 regulators-0 {
656 compatible = "qcom,rpm-pm8994-regulators";
657
658 vdd_s1-supply = <&vph_pwr>;
659 vdd_s2-supply = <&vph_pwr>;
660 vdd_s3-supply = <&vph_pwr>;
661 vdd_s4-supply = <&vph_pwr>;
662 vdd_s5-supply = <&vph_pwr>;
663 vdd_s6-supply = <&vph_pwr>;
664 vdd_s7-supply = <&vph_pwr>;
665 vdd_s8-supply = <&vph_pwr>;
666 vdd_s9-supply = <&vph_pwr>;
667 vdd_s10-supply = <&vph_pwr>;
668 vdd_s11-supply = <&vph_pwr>;
669 vdd_s12-supply = <&vph_pwr>;
670 vdd_l1-supply = <&pm8994_s3>;
671 vdd_l2_l26_l28-supply = <&pm8994_s3>;
672 vdd_l3_l11-supply = <&pm8994_s3>;
673 vdd_l4_l27_l31-supply = <&pm8994_s3>;
674 vdd_l5_l7-supply = <&pm8994_s5>;
675 vdd_l6_l12_l32-supply = <&pm8994_s5>;
676 vdd_l8_l16_l30-supply = <&vph_pwr>;
677 vdd_l14_l15-supply = <&pm8994_s5>;
678 vdd_l20_l21-supply = <&pm8994_s5>;
679 vdd_l25-supply = <&pm8994_s3>;
680 vdd_lvs1_2-supply = <&pm8994_s4>;
681
682 pm8994_s3: s3 {
683 regulator-min-microvolt = <1300000>;
684 regulator-max-microvolt = <1300000>;
685 };
686
687 pm8994_s4: s4 {
688 regulator-min-microvolt = <1800000>;
689 regulator-max-microvolt = <1800000>;
690 regulator-system-load = <325000>;
691 regulator-always-on;
692 };
693
694 pm8994_s5: s5 {
695 regulator-min-microvolt = <2150000>;
696 regulator-max-microvolt = <2150000>;
697 };
698
699 pm8994_s7: s7 {
700 regulator-min-microvolt = <800000>;
701 regulator-max-microvolt = <800000>;
702 };
703
704 pm8994_l1: l1 {
705 regulator-min-microvolt = <1000000>;
706 regulator-max-microvolt = <1000000>;
707 };
708
709 pm8994_l2: l2 {
710 regulator-min-microvolt = <1250000>;
711 regulator-max-microvolt = <1250000>;
712 };
713
714 pm8994_l3: l3 {
715 regulator-min-microvolt = <1100000>;
716 regulator-max-microvolt = <1100000>;
717 };
718
719 pm8994_l4: l4 {
720 regulator-min-microvolt = <1225000>;
721 regulator-max-microvolt = <1225000>;
722 };
723
724 /* L6 and L7 seem unused. */
725
726 pm8994_l8: l8 {
727 regulator-min-microvolt = <1800000>;
728 regulator-max-microvolt = <1800000>;
729 };
730
731 pm8994_l9: l9 {
732 regulator-min-microvolt = <1800000>;
733 regulator-max-microvolt = <1800000>;
734 };
735
736 pm8994_l10: l10 {
737 regulator-min-microvolt = <1800000>;
738 regulator-max-microvolt = <1800000>;
739 };
740
741 pm8994_l11: l11 {
742 regulator-min-microvolt = <1100000>;
743 regulator-max-microvolt = <1100000>;
744 };
745
746 pm8994_l12: l12 {
747 regulator-min-microvolt = <1800000>;
748 regulator-max-microvolt = <1800000>;
749 regulator-allow-set-load;
750 };
751
752 pm8994_l13: l13 {
753 regulator-min-microvolt = <1800000>;
754 regulator-max-microvolt = <2950000>;
755 regulator-system-load = <22000>;
756 regulator-allow-set-load;
757 };
758
759 pm8994_l14: l14 {
760 regulator-min-microvolt = <1700000>;
761 regulator-max-microvolt = <1900000>;
762 };
763
764 pm8994_l15: l15 {
765 regulator-min-microvolt = <1800000>;
766 regulator-max-microvolt = <1800000>;
767 };
768
769 pm8994_l16: l16 {
770 regulator-min-microvolt = <2700000>;
771 regulator-max-microvolt = <2700000>;
772 };
773
774 pm8994_l17: l17 {
775 regulator-min-microvolt = <2200000>;
776 regulator-max-microvolt = <2500000>;
777 };
778
779 pm8994_l18: l18 {
780 regulator-min-microvolt = <1800000>;
781 regulator-max-microvolt = <1800000>;
782 };
783
784 pm8994_l19: l19 {
785 regulator-min-microvolt = <3000000>;
786 regulator-max-microvolt = <3000000>;
787 };
788
789 pm8994_l20: l20 {
790 regulator-min-microvolt = <2950000>;
791 regulator-max-microvolt = <2950000>;
792 regulator-system-load = <570000>;
793 regulator-allow-set-load;
794 };
795
796 pm8994_l21: l21 {
797 regulator-min-microvolt = <2950000>;
798 regulator-max-microvolt = <2950000>;
799 regulator-system-load = <800000>;
800 regulator-allow-set-load;
801 };
802
803 pm8994_l22: l22 {
804 regulator-min-microvolt = <3000000>;
805 regulator-max-microvolt = <3000000>;
806 };
807
808 pm8994_l23: l23 {
809 regulator-min-microvolt = <2700000>;
810 regulator-max-microvolt = <2700000>;
811 };
812
813 pm8994_l24: l24 {
814 regulator-min-microvolt = <3075000>;
815 regulator-max-microvolt = <3075000>;
816 regulator-allow-set-load;
817 };
818
819 pm8994_l25: l25 {
820 regulator-min-microvolt = <1200000>;
821 regulator-max-microvolt = <1200000>;
822 regulator-allow-set-load;
823 };
824
825 pm8994_l27: l27 {
826 regulator-min-microvolt = <1000000>;
827 regulator-max-microvolt = <1200000>;
828 };
829
830 pm8994_l28: l28 {
831 regulator-min-microvolt = <925000>;
832 regulator-max-microvolt = <925000>;
833 regulator-allow-set-load;
834 };
835
836 pm8994_l29: l29 {
837 regulator-min-microvolt = <2700000>;
838 regulator-max-microvolt = <2700000>;
839 };
840
841 pm8994_l30: l30 { };
842
843 pm8994_l32: l32 {
844 regulator-min-microvolt = <1800000>;
845 regulator-max-microvolt = <1800000>;
846 };
847 };
848};
849
850&sdhc1 {
851 vmmc-supply = <&pm8994_l20>;
852 vqmmc-supply = <&pm8994_s4>;
853 mmc-hs400-1_8v;
854 mmc-hs200-1_8v;
855 status = "okay";
856};
857
858&sdhc2 {
859 cd-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
860 vmmc-supply = <&pm8994_l21>;
861 vqmmc-supply = <&pm8994_l13>;
862 status = "okay";
863};
864
865&tlmm {
866 gpio-reserved-ranges = <0 4>;
867 pinctrl-0 = <&sw_service_gpio>;
868 pinctrl-names = "default";
869
870 disp_reset_n_gpio: disp-reset-n-state {
871 pins = "gpio8";
872 function = "gpio";
873 drive-strength = <2>;
874 bias-disable;
875 };
876
877 mdp_vsync_p_gpio: mdp-vsync-p-state {
878 pins = "gpio10";
879 function = "mdp_vsync";
880 drive-strength = <2>;
881 bias-disable;
882 };
883
884 sw_service_gpio: sw-service-gpio-state {
885 pins = "gpio16";
886 function = "gpio";
887 drive-strength = <2>;
888 bias-pull-up;
889 };
890
891 usb_detect: usb-detect-state {
892 pins = "gpio25";
893 function = "gpio";
894 drive-strength = <2>;
895 bias-disable;
896 output-high;
897 };
898
899 uim_detect_en: uim-detect-en-state {
900 pins = "gpio29";
901 function = "gpio";
902 drive-strength = <2>;
903 bias-disable;
904 output-high;
905 };
906
907 tray_det_pin: tray-det-state {
908 pins = "gpio40";
909 function = "gpio";
910 drive-strength = <2>;
911 bias-disable;
912 };
913
914 tp_vddio_en: tp-vddio-en-state {
915 pins = "gpio50";
916 function = "gpio";
917 drive-strength = <2>;
918 bias-disable;
919 output-high;
920 };
921
922 lcd_vddio_en: lcd-vddio-en-state {
923 pins = "gpio51";
924 function = "gpio";
925 drive-strength = <2>;
926 bias-disable;
927 output-low;
928 };
929
930 wl_host_wake: wl-host-wake-state {
931 pins = "gpio79";
932 function = "gpio";
933 drive-strength = <2>;
934 bias-pull-down;
935 };
936
937 wl_reg_on: wl-reg-on-state {
938 pins = "gpio84";
939 function = "gpio";
940 drive-strength = <2>;
941 bias-disable;
942 output-low;
943 };
944
945 ts_reset_n: ts-rst-n-state {
946 pins = "gpio89";
947 function = "gpio";
948 drive-strength = <2>;
949 };
950
951 touch_int_n: touch-int-n-state {
952 pins = "gpio125";
953 function = "gpio";
954 drive-strength = <2>;
955 bias-pull-up;
956 };
957
958 touch_int_sleep: touch-int-sleep-state {
959 pins = "gpio125";
960 function = "gpio";
961 drive-strength = <2>;
962 bias-pull-down;
963 };
964};
965
966&usb3 {
967 qcom,select-utmi-as-pipe-clk;
968 status = "okay";
969};
970
971&usb3_dwc3 {
972 extcon = <&usb3_id>;
973 dr_mode = "peripheral";
974 maximum-speed = "high-speed";
975 phys = <&hsusb_phy1>;
976 phy-names = "usb2-phy";
977 snps,hird-threshold = /bits/ 8 <0>;
978};