| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
| 2 | |
| 3 | /dts-v1/; |
| 4 | |
| 5 | #include "msm8916-samsung-a2015-common.dtsi" |
| 6 | |
| 7 | / { |
| 8 | model = "Samsung Galaxy A3U (EUR)"; |
| 9 | compatible = "samsung,a3u-eur", "qcom,msm8916"; |
| 10 | chassis-type = "handset"; |
| 11 | |
| 12 | reg_panel_vdd3: regulator-panel-vdd3 { |
| 13 | compatible = "regulator-fixed"; |
| 14 | regulator-name = "panel_vdd3"; |
| 15 | regulator-min-microvolt = <1800000>; |
| 16 | regulator-max-microvolt = <1800000>; |
| 17 | |
| 18 | gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>; |
| 19 | enable-active-high; |
| 20 | |
| 21 | pinctrl-names = "default"; |
| 22 | pinctrl-0 = <&panel_vdd3_default>; |
| 23 | }; |
| 24 | |
| 25 | reg_touch_key: regulator-touch-key { |
| 26 | compatible = "regulator-fixed"; |
| 27 | regulator-name = "touch_key"; |
| 28 | regulator-min-microvolt = <2800000>; |
| 29 | regulator-max-microvolt = <2800000>; |
| 30 | |
| 31 | gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; |
| 32 | enable-active-high; |
| 33 | |
| 34 | pinctrl-names = "default"; |
| 35 | pinctrl-0 = <&tkey_en_default>; |
| 36 | }; |
| 37 | |
| 38 | reg_key_led: regulator-key-led { |
| 39 | compatible = "regulator-fixed"; |
| 40 | regulator-name = "key_led"; |
| 41 | regulator-min-microvolt = <3300000>; |
| 42 | regulator-max-microvolt = <3300000>; |
| 43 | |
| 44 | gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>; |
| 45 | enable-active-high; |
| 46 | |
| 47 | pinctrl-names = "default"; |
| 48 | pinctrl-0 = <&tkey_led_en_default>; |
| 49 | }; |
| 50 | }; |
| 51 | |
| 52 | &touchkey { |
| 53 | vcc-supply = <®_touch_key>; |
| 54 | vdd-supply = <®_key_led>; |
| 55 | }; |
| 56 | |
| 57 | &accelerometer { |
| 58 | mount-matrix = "0", "1", "0", |
| 59 | "1", "0", "0", |
| 60 | "0", "0", "1"; |
| 61 | }; |
| 62 | |
| 63 | &blsp_i2c5 { |
| 64 | status = "okay"; |
| 65 | |
| 66 | touchscreen@20 { |
| 67 | compatible = "zinitix,bt541"; |
| 68 | |
| 69 | reg = <0x20>; |
| 70 | interrupt-parent = <&tlmm>; |
| 71 | interrupts = <13 IRQ_TYPE_EDGE_FALLING>; |
| 72 | |
| 73 | touchscreen-size-x = <540>; |
| 74 | touchscreen-size-y = <960>; |
| 75 | |
| 76 | vcca-supply = <®_vdd_tsp_a>; |
| 77 | vdd-supply = <&pm8916_l6>; |
| 78 | |
| 79 | pinctrl-names = "default"; |
| 80 | pinctrl-0 = <&ts_int_default>; |
| 81 | }; |
| 82 | }; |
| 83 | |
| 84 | &clk_pwm { |
| 85 | status = "okay"; |
| 86 | }; |
| 87 | |
| 88 | &mdss_dsi0 { |
| 89 | panel@0 { |
| 90 | reg = <0>; |
| 91 | |
| 92 | compatible = "samsung,s6e88a0-ams452ef01"; |
| 93 | |
| 94 | vdd3-supply = <®_panel_vdd3>; |
| 95 | vci-supply = <&pm8916_l17>; |
| 96 | reset-gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>; |
| 97 | |
| 98 | port { |
| 99 | panel_in: endpoint { |
| 100 | remote-endpoint = <&mdss_dsi0_out>; |
| 101 | }; |
| 102 | }; |
| 103 | }; |
| 104 | }; |
| 105 | |
| 106 | &mdss_dsi0_out { |
| 107 | data-lanes = <0 1>; |
| 108 | remote-endpoint = <&panel_in>; |
| 109 | }; |
| 110 | |
| 111 | &vibrator { |
| 112 | status = "okay"; |
| 113 | }; |
| 114 | |
| 115 | &wcnss { |
| 116 | status = "okay"; |
| 117 | }; |
| 118 | |
| 119 | &wcnss_iris { |
| 120 | compatible = "qcom,wcn3620"; |
| 121 | }; |
| 122 | |
| 123 | &wcnss_mem { |
| 124 | status = "okay"; |
| 125 | }; |
| 126 | |
| 127 | &tlmm { |
| 128 | panel_vdd3_default: panel-vdd3-default-state { |
| 129 | pins = "gpio9"; |
| 130 | function = "gpio"; |
| 131 | |
| 132 | drive-strength = <2>; |
| 133 | bias-disable; |
| 134 | }; |
| 135 | |
| 136 | tkey_en_default: tkey-en-default-state { |
| 137 | pins = "gpio86"; |
| 138 | function = "gpio"; |
| 139 | |
| 140 | drive-strength = <2>; |
| 141 | bias-disable; |
| 142 | }; |
| 143 | |
| 144 | tkey_led_en_default: tkey-led-en-default-state { |
| 145 | pins = "gpio60"; |
| 146 | function = "gpio"; |
| 147 | |
| 148 | drive-strength = <2>; |
| 149 | bias-disable; |
| 150 | }; |
| 151 | }; |