Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) |
| 2 | /* |
| 3 | * IPQ9574 RDP454 board device tree source |
| 4 | * |
| 5 | * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. |
| 6 | * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. |
| 7 | */ |
| 8 | |
| 9 | /dts-v1/; |
| 10 | |
| 11 | #include "ipq9574.dtsi" |
| 12 | |
| 13 | / { |
| 14 | model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C9"; |
| 15 | compatible = "qcom,ipq9574-ap-al02-c9", "qcom,ipq9574"; |
| 16 | |
| 17 | aliases { |
| 18 | serial0 = &blsp1_uart2; |
| 19 | }; |
| 20 | |
| 21 | chosen { |
| 22 | stdout-path = "serial0:115200n8"; |
| 23 | }; |
| 24 | }; |
| 25 | |
| 26 | &blsp1_spi0 { |
| 27 | pinctrl-0 = <&spi_0_pins>; |
| 28 | pinctrl-names = "default"; |
| 29 | status = "okay"; |
| 30 | |
| 31 | flash@0 { |
| 32 | compatible = "micron,n25q128a11", "jedec,spi-nor"; |
| 33 | reg = <0>; |
| 34 | #address-cells = <1>; |
| 35 | #size-cells = <1>; |
| 36 | spi-max-frequency = <50000000>; |
| 37 | }; |
| 38 | }; |
| 39 | |
| 40 | &blsp1_uart2 { |
| 41 | pinctrl-0 = <&uart2_pins>; |
| 42 | pinctrl-names = "default"; |
| 43 | status = "okay"; |
| 44 | }; |
| 45 | |
| 46 | &rpm_requests { |
| 47 | regulators { |
| 48 | compatible = "qcom,rpm-mp5496-regulators"; |
| 49 | |
| 50 | ipq9574_s1: s1 { |
| 51 | /* |
| 52 | * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. |
| 53 | * During regulator registration, kernel not knowing the initial voltage, |
| 54 | * considers it as zero and brings up the regulators with minimum supported voltage. |
| 55 | * Update the regulator-min-microvolt with SVS voltage of 725mV so that |
| 56 | * the regulators are brought up with 725mV which is sufficient for all the |
| 57 | * corner parts to operate at 800MHz |
| 58 | */ |
| 59 | regulator-min-microvolt = <725000>; |
| 60 | regulator-max-microvolt = <1075000>; |
| 61 | }; |
| 62 | }; |
| 63 | }; |
| 64 | |
| 65 | &sleep_clk { |
| 66 | clock-frequency = <32000>; |
| 67 | }; |
| 68 | |
| 69 | &tlmm { |
| 70 | spi_0_pins: spi-0-state { |
| 71 | pins = "gpio11", "gpio12", "gpio13", "gpio14"; |
| 72 | function = "blsp0_spi"; |
| 73 | drive-strength = <8>; |
| 74 | bias-disable; |
| 75 | }; |
| 76 | }; |
| 77 | |
| 78 | &xo_board_clk { |
| 79 | clock-frequency = <24000000>; |
| 80 | }; |