Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 2 | /* |
| 3 | * Copyright (C) 2021 MediaTek Inc. |
| 4 | * Author: Sam.Shih <sam.shih@mediatek.com> |
| 5 | */ |
| 6 | |
| 7 | /dts-v1/; |
| 8 | #include "mt7986b.dtsi" |
| 9 | |
| 10 | / { |
| 11 | model = "MediaTek MT7986b RFB"; |
| 12 | chassis-type = "embedded"; |
| 13 | compatible = "mediatek,mt7986b-rfb", "mediatek,mt7986b"; |
| 14 | |
| 15 | aliases { |
| 16 | serial0 = &uart0; |
| 17 | }; |
| 18 | |
| 19 | chosen { |
| 20 | stdout-path = "serial0:115200n8"; |
| 21 | }; |
| 22 | |
| 23 | memory@40000000 { |
| 24 | device_type = "memory"; |
| 25 | reg = <0 0x40000000 0 0x40000000>; |
| 26 | }; |
| 27 | }; |
| 28 | |
| 29 | &crypto { |
| 30 | status = "okay"; |
| 31 | }; |
| 32 | |
| 33 | ð { |
| 34 | status = "okay"; |
| 35 | |
| 36 | gmac0: mac@0 { |
| 37 | compatible = "mediatek,eth-mac"; |
| 38 | reg = <0>; |
| 39 | phy-mode = "2500base-x"; |
| 40 | |
| 41 | fixed-link { |
| 42 | speed = <2500>; |
| 43 | full-duplex; |
| 44 | pause; |
| 45 | }; |
| 46 | }; |
| 47 | |
| 48 | mdio: mdio-bus { |
| 49 | #address-cells = <1>; |
| 50 | #size-cells = <0>; |
| 51 | |
| 52 | switch@0 { |
| 53 | compatible = "mediatek,mt7531"; |
| 54 | reg = <31>; |
| 55 | reset-gpios = <&pio 5 0>; |
| 56 | |
| 57 | ports { |
| 58 | #address-cells = <1>; |
| 59 | #size-cells = <0>; |
| 60 | |
| 61 | port@0 { |
| 62 | reg = <0>; |
| 63 | label = "lan0"; |
| 64 | }; |
| 65 | |
| 66 | port@1 { |
| 67 | reg = <1>; |
| 68 | label = "lan1"; |
| 69 | }; |
| 70 | |
| 71 | port@2 { |
| 72 | reg = <2>; |
| 73 | label = "lan2"; |
| 74 | }; |
| 75 | |
| 76 | port@3 { |
| 77 | reg = <3>; |
| 78 | label = "lan3"; |
| 79 | }; |
| 80 | |
| 81 | port@4 { |
| 82 | reg = <4>; |
| 83 | label = "lan4"; |
| 84 | }; |
| 85 | |
| 86 | port@6 { |
| 87 | reg = <6>; |
| 88 | label = "cpu"; |
| 89 | ethernet = <&gmac0>; |
| 90 | phy-mode = "2500base-x"; |
| 91 | |
| 92 | fixed-link { |
| 93 | speed = <2500>; |
| 94 | full-duplex; |
| 95 | pause; |
| 96 | }; |
| 97 | }; |
| 98 | }; |
| 99 | }; |
| 100 | }; |
| 101 | }; |
| 102 | |
| 103 | &pio { |
| 104 | spi_flash_pins: spi-flash-pins { |
| 105 | mux { |
| 106 | function = "spi"; |
| 107 | groups = "spi0", "spi0_wp_hold"; |
| 108 | }; |
| 109 | }; |
| 110 | |
| 111 | spic_pins: spic-pins { |
| 112 | mux { |
| 113 | function = "spi"; |
| 114 | groups = "spi1_2"; |
| 115 | }; |
| 116 | }; |
| 117 | |
| 118 | wf_2g_5g_pins: wf-2g-5g-pins { |
| 119 | mux { |
| 120 | function = "wifi"; |
| 121 | groups = "wf_2g", "wf_5g"; |
| 122 | }; |
| 123 | conf { |
| 124 | pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", |
| 125 | "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", |
| 126 | "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", |
| 127 | "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", |
| 128 | "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", |
| 129 | "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", |
| 130 | "WF1_TOP_CLK", "WF1_TOP_DATA"; |
| 131 | drive-strength = <4>; |
| 132 | }; |
| 133 | }; |
| 134 | |
| 135 | wf_dbdc_pins: wf-dbdc-pins { |
| 136 | mux { |
| 137 | function = "wifi"; |
| 138 | groups = "wf_dbdc"; |
| 139 | }; |
| 140 | conf { |
| 141 | pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", |
| 142 | "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", |
| 143 | "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", |
| 144 | "WF0_TOP_CLK", "WF0_TOP_DATA"; |
| 145 | drive-strength = <4>; |
| 146 | }; |
| 147 | }; |
| 148 | }; |
| 149 | |
| 150 | &spi0 { |
| 151 | pinctrl-names = "default"; |
| 152 | pinctrl-0 = <&spi_flash_pins>; |
| 153 | cs-gpios = <0>, <0>; |
| 154 | status = "okay"; |
| 155 | spi_nand: spi_nand@0 { |
| 156 | compatible = "spi-nand"; |
| 157 | reg = <0>; |
| 158 | spi-max-frequency = <10000000>; |
| 159 | spi-tx-buswidth = <4>; |
| 160 | spi-rx-buswidth = <4>; |
| 161 | }; |
| 162 | }; |
| 163 | |
| 164 | &spi1 { |
| 165 | pinctrl-names = "default"; |
| 166 | pinctrl-0 = <&spic_pins>; |
| 167 | cs-gpios = <0>, <0>; |
| 168 | status = "okay"; |
| 169 | }; |
| 170 | |
| 171 | &ssusb { |
| 172 | status = "okay"; |
| 173 | }; |
| 174 | |
| 175 | &uart0 { |
| 176 | status = "okay"; |
| 177 | }; |
| 178 | |
| 179 | &usb_phy { |
| 180 | status = "okay"; |
| 181 | }; |
| 182 | |
| 183 | &wifi { |
| 184 | status = "okay"; |
| 185 | pinctrl-names = "default", "dbdc"; |
| 186 | pinctrl-0 = <&wf_2g_5g_pins>; |
| 187 | pinctrl-1 = <&wf_dbdc_pins>; |
| 188 | }; |