Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
| 2 | /* |
| 3 | * Copyright (c) 2022, Collabora Ltd |
| 4 | * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> |
| 5 | */ |
| 6 | |
| 7 | /dts-v1/; |
| 8 | #include <dt-bindings/gpio/gpio.h> |
| 9 | #include "mt6795.dtsi" |
| 10 | #include "mt6331.dtsi" |
| 11 | |
| 12 | / { |
| 13 | model = "Sony Xperia M5"; |
| 14 | compatible = "sony,xperia-m5", "mediatek,mt6795"; |
| 15 | chassis-type = "handset"; |
| 16 | |
| 17 | aliases { |
| 18 | mmc0 = &mmc0; |
| 19 | mmc1 = &mmc1; |
| 20 | mmc2 = &mmc2; |
| 21 | serial0 = &uart0; |
| 22 | serial1 = &uart1; |
| 23 | }; |
| 24 | |
| 25 | backlight_lcd0: backlight { |
| 26 | compatible = "led-backlight"; |
| 27 | leds = <&disp_led_pwm>, <&pmic_bl_led>; |
| 28 | |
| 29 | default-brightness-level = <300>; |
| 30 | }; |
| 31 | |
| 32 | led-controller-display { |
| 33 | compatible = "pwm-leds"; |
| 34 | |
| 35 | disp_led_pwm: led-0 { |
| 36 | label = "backlight-pwm"; |
| 37 | pwms = <&pwm0 0 500000>; |
| 38 | max-brightness = <1024>; |
| 39 | }; |
| 40 | }; |
| 41 | |
| 42 | memory@40000000 { |
| 43 | device_type = "memory"; |
| 44 | reg = <0 0x40000000 0 0x1e800000>; |
| 45 | }; |
| 46 | |
| 47 | reserved_memory: reserved-memory { |
| 48 | #address-cells = <2>; |
| 49 | #size-cells = <2>; |
| 50 | ranges; |
| 51 | |
| 52 | /* 128 KiB reserved for ARM Trusted Firmware (BL31) */ |
| 53 | bl31_secmon_reserved: secmon@43000000 { |
| 54 | reg = <0 0x43000000 0 0x30000>; |
| 55 | no-map; |
| 56 | }; |
| 57 | |
| 58 | /* preloader and bootloader regions cannot be touched */ |
| 59 | preloader-region@44800000 { |
| 60 | reg = <0 0x44800000 0 0x100000>; |
| 61 | no-map; |
| 62 | }; |
| 63 | |
| 64 | bootloader-region@46000000 { |
| 65 | reg = <0 0x46000000 0 0x400000>; |
| 66 | no-map; |
| 67 | }; |
| 68 | }; |
| 69 | |
| 70 | vreg_disp_avdd: regulator-disp-avdd { |
| 71 | compatible = "regulator-fixed"; |
| 72 | regulator-name = "disp_avdd"; |
| 73 | regulator-min-microvolt = <5000000>; |
| 74 | regulator-max-microvolt = <5000000>; |
| 75 | gpio = <&pio 138 GPIO_ACTIVE_HIGH>; |
| 76 | enable-active-high; |
| 77 | }; |
| 78 | |
| 79 | vreg_disp_avee: regulator-disp-avee { |
| 80 | compatible = "regulator-fixed"; |
| 81 | regulator-name = "disp_avee"; |
| 82 | regulator-min-microvolt = <5000000>; |
| 83 | regulator-max-microvolt = <5000000>; |
| 84 | gpio = <&pio 139 GPIO_ACTIVE_HIGH>; |
| 85 | enable-active-high; |
| 86 | }; |
| 87 | |
| 88 | vreg_disp_vddh: regulator-disp-vddh { |
| 89 | compatible = "regulator-fixed"; |
| 90 | regulator-name = "disp_vddh"; |
| 91 | regulator-min-microvolt = <1800000>; |
| 92 | regulator-max-microvolt = <1800000>; |
| 93 | regulator-always-on; |
| 94 | regulator-boot-on; |
| 95 | }; |
| 96 | }; |
| 97 | |
| 98 | &dsi0 { |
| 99 | status = "okay"; |
| 100 | #address-cells = <1>; |
| 101 | #size-cells = <0>; |
| 102 | |
| 103 | panel: panel@0 { |
| 104 | compatible = "sharp,ls060t1sx01"; |
| 105 | reg = <0>; |
| 106 | avdd-supply = <&vreg_disp_avdd>; |
| 107 | avee-supply = <&vreg_disp_avee>; |
| 108 | vddi-supply = <&mt6331_vgp3_reg>; |
| 109 | vddh-supply = <&vreg_disp_vddh>; |
| 110 | reset-gpios = <&pio 106 GPIO_ACTIVE_LOW>; |
| 111 | backlight = <&backlight_lcd0>; |
| 112 | |
| 113 | pinctrl-0 = <&disp_rst_pins>; |
| 114 | pinctrl-names = "default"; |
| 115 | |
| 116 | port { |
| 117 | panel_in: endpoint { |
| 118 | remote-endpoint = <&dsi0_out>; |
| 119 | }; |
| 120 | }; |
| 121 | }; |
| 122 | |
| 123 | port { |
| 124 | dsi0_out: endpoint { |
| 125 | remote-endpoint = <&panel_in>; |
| 126 | }; |
| 127 | }; |
| 128 | }; |
| 129 | |
| 130 | &fhctl { |
| 131 | clocks = <&apmixedsys CLK_APMIXED_MAINPLL>, <&apmixedsys CLK_APMIXED_MPLL>, |
| 132 | <&apmixedsys CLK_APMIXED_MSDCPLL>; |
| 133 | mediatek,hopping-ssc-percent = <8>, <5>, <8>; |
| 134 | status = "okay"; |
| 135 | }; |
| 136 | |
| 137 | &i2c0 { |
| 138 | pinctrl-names = "default"; |
| 139 | pinctrl-0 = <&i2c0_pins>; |
| 140 | status = "okay"; |
| 141 | }; |
| 142 | |
| 143 | &i2c1 { |
| 144 | pinctrl-names = "default"; |
| 145 | pinctrl-0 = <&i2c1_pins>; |
| 146 | status = "okay"; |
| 147 | |
| 148 | accelerometer@10 { |
| 149 | compatible = "bosch,bma255"; |
| 150 | reg = <0x10>; |
| 151 | pinctrl-names = "default"; |
| 152 | pinctrl-0 = <&accel_pins>; |
| 153 | }; |
| 154 | |
| 155 | magnetometer@12 { |
| 156 | compatible = "bosch,bmm150"; |
| 157 | reg = <0x12>; |
| 158 | }; |
| 159 | }; |
| 160 | |
| 161 | &i2c2 { |
| 162 | pinctrl-names = "default"; |
| 163 | pinctrl-0 = <&i2c2_pins>; |
| 164 | status = "okay"; |
| 165 | |
| 166 | touchscreen@20 { |
| 167 | compatible = "syna,rmi4-i2c"; |
| 168 | reg = <0x20>; |
| 169 | #address-cells = <1>; |
| 170 | #size-cells = <0>; |
| 171 | interrupts-extended = <&pio 6 IRQ_TYPE_EDGE_FALLING>; |
| 172 | pinctrl-names = "default"; |
| 173 | pinctrl-0 = <&ts_pins>; |
| 174 | syna,startup-delay-ms = <160>; |
| 175 | syna,reset-delay-ms = <90>; |
| 176 | |
| 177 | rmi4-f01@1 { |
| 178 | reg = <0x1>; |
| 179 | syna,nosleep-mode = <1>; |
| 180 | }; |
| 181 | |
| 182 | rmi4-f12@12 { |
| 183 | reg = <0x12>; |
| 184 | syna,sensor-type = <1>; |
| 185 | }; |
| 186 | }; |
| 187 | }; |
| 188 | |
| 189 | &i2c3 { |
| 190 | pinctrl-names = "default"; |
| 191 | pinctrl-0 = <&i2c3_pins>; |
| 192 | status = "okay"; |
| 193 | |
| 194 | pn547: nfc@28 { |
| 195 | compatible = "nxp,pn544-i2c"; |
| 196 | reg = <0x28>; |
| 197 | interrupts-extended = <&pio 3 IRQ_TYPE_EDGE_RISING>; |
| 198 | pinctrl-names = "default"; |
| 199 | pinctrl-0 = <&nfc_pins>; |
| 200 | enable-gpios = <&pio 149 GPIO_ACTIVE_HIGH>; |
| 201 | firmware-gpios = <&pio 94 GPIO_ACTIVE_HIGH>; |
| 202 | }; |
| 203 | |
| 204 | proximity@48 { |
| 205 | compatible = "sensortek,stk3310"; |
| 206 | reg = <0x48>; |
| 207 | interrupts-extended = <&pio 8 IRQ_TYPE_EDGE_FALLING>; |
| 208 | pinctrl-names = "default"; |
| 209 | pinctrl-0 = <&proximity_pins>; |
| 210 | }; |
| 211 | }; |
| 212 | |
| 213 | &mmc0 { |
| 214 | /* eMMC controller */ |
| 215 | mediatek,latch-ck = <0x14>; /* hs400 */ |
| 216 | mediatek,hs200-cmd-int-delay = <1>; |
| 217 | mediatek,hs400-cmd-int-delay = <1>; |
| 218 | mediatek,hs400-ds-dly3 = <0x1a>; |
| 219 | non-removable; |
| 220 | pinctrl-names = "default", "state_uhs"; |
| 221 | pinctrl-0 = <&mmc0_pins_default>; |
| 222 | pinctrl-1 = <&mmc0_pins_uhs>; |
| 223 | vmmc-supply = <&mt6331_vemc33_reg>; |
| 224 | vqmmc-supply = <&mt6331_vio18_reg>; |
| 225 | status = "okay"; |
| 226 | }; |
| 227 | |
| 228 | &mmc1 { |
| 229 | /* MicroSD card slot */ |
| 230 | vmmc-supply = <&mt6331_vmc_reg>; |
| 231 | vqmmc-supply = <&mt6331_vmch_reg>; |
| 232 | status = "okay"; |
| 233 | }; |
| 234 | |
| 235 | &mmc2 { |
| 236 | /* SDIO WiFi on MMC2 */ |
| 237 | vmmc-supply = <&mt6331_vmc_reg>; |
| 238 | vqmmc-supply = <&mt6331_vmch_reg>; |
| 239 | status = "okay"; |
| 240 | }; |
| 241 | |
| 242 | &mt6331_vgp3_reg { |
| 243 | regulator-min-microvolt = <1800000>; |
| 244 | }; |
| 245 | |
| 246 | &pio { |
| 247 | disp_rst_pins: lcm-pins { |
| 248 | pins-rst { |
| 249 | pinmux = <PINMUX_GPIO106__FUNC_GPIO106>; |
| 250 | }; |
| 251 | }; |
| 252 | |
| 253 | mmc0_pins_default: emmc-sdr-pins { |
| 254 | pins-cmd-dat { |
| 255 | pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>, |
| 256 | <PINMUX_GPIO155__FUNC_MSDC0_DAT1>, |
| 257 | <PINMUX_GPIO156__FUNC_MSDC0_DAT2>, |
| 258 | <PINMUX_GPIO157__FUNC_MSDC0_DAT3>, |
| 259 | <PINMUX_GPIO158__FUNC_MSDC0_DAT4>, |
| 260 | <PINMUX_GPIO159__FUNC_MSDC0_DAT5>, |
| 261 | <PINMUX_GPIO160__FUNC_MSDC0_DAT6>, |
| 262 | <PINMUX_GPIO161__FUNC_MSDC0_DAT7>, |
| 263 | <PINMUX_GPIO162__FUNC_MSDC0_CMD>; |
| 264 | input-enable; |
| 265 | bias-pull-up = <MTK_PUPD_SET_R1R0_01>; |
| 266 | }; |
| 267 | |
| 268 | pins-clk { |
| 269 | pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>; |
| 270 | bias-pull-down = <MTK_PUPD_SET_R1R0_10>; |
| 271 | }; |
| 272 | |
| 273 | pins-rst { |
| 274 | pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>; |
| 275 | bias-pull-up = <MTK_PUPD_SET_R1R0_10>; |
| 276 | }; |
| 277 | }; |
| 278 | |
| 279 | mmc0_pins_uhs: emmc-uhs-pins { |
| 280 | pins-cmd-dat { |
| 281 | pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>, |
| 282 | <PINMUX_GPIO155__FUNC_MSDC0_DAT1>, |
| 283 | <PINMUX_GPIO156__FUNC_MSDC0_DAT2>, |
| 284 | <PINMUX_GPIO157__FUNC_MSDC0_DAT3>, |
| 285 | <PINMUX_GPIO158__FUNC_MSDC0_DAT4>, |
| 286 | <PINMUX_GPIO159__FUNC_MSDC0_DAT5>, |
| 287 | <PINMUX_GPIO160__FUNC_MSDC0_DAT6>, |
| 288 | <PINMUX_GPIO161__FUNC_MSDC0_DAT7>, |
| 289 | <PINMUX_GPIO162__FUNC_MSDC0_CMD>; |
| 290 | input-enable; |
| 291 | drive-strength = <MTK_DRIVE_6mA>; |
| 292 | bias-pull-up = <MTK_PUPD_SET_R1R0_01>; |
| 293 | }; |
| 294 | |
| 295 | pins-clk { |
| 296 | pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>; |
| 297 | drive-strength = <MTK_DRIVE_6mA>; |
| 298 | bias-pull-down = <MTK_PUPD_SET_R1R0_10>; |
| 299 | }; |
| 300 | |
| 301 | pins-rst { |
| 302 | pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>; |
| 303 | drive-strength = <MTK_DRIVE_6mA>; |
| 304 | bias-pull-up = <MTK_PUPD_SET_R1R0_10>; |
| 305 | }; |
| 306 | |
| 307 | pins-ds { |
| 308 | pinmux = <PINMUX_GPIO164__FUNC_MSDC0_DSL>; |
| 309 | drive-strength = <MTK_DRIVE_6mA>; |
| 310 | bias-pull-down = <MTK_PUPD_SET_R1R0_10>; |
| 311 | }; |
| 312 | }; |
| 313 | |
| 314 | nfc_pins: nfc-pins { |
| 315 | pins-irq { |
| 316 | pinmux = <PINMUX_GPIO3__FUNC_GPIO3>; |
| 317 | bias-pull-down; |
| 318 | input-enable; |
| 319 | }; |
| 320 | |
| 321 | pins-fw-ven { |
| 322 | pinmux = <PINMUX_GPIO94__FUNC_GPIO94>, |
| 323 | <PINMUX_GPIO149__FUNC_GPIO149>; |
| 324 | }; |
| 325 | }; |
| 326 | |
| 327 | ts_pins: touchscreen-pins { |
| 328 | pins-irq { |
| 329 | pinmux = <PINMUX_GPIO6__FUNC_GPIO6>; |
| 330 | bias-pull-up; |
| 331 | input-enable; |
| 332 | }; |
| 333 | |
| 334 | pins-rst { |
| 335 | pinmux = <PINMUX_GPIO102__FUNC_GPIO102>; |
| 336 | output-high; |
| 337 | }; |
| 338 | }; |
| 339 | |
| 340 | proximity_pins: proximity-pins { |
| 341 | pins-irq { |
| 342 | pinmux = <PINMUX_GPIO8__FUNC_GPIO8>; |
| 343 | bias-pull-up; |
| 344 | input-enable; |
| 345 | }; |
| 346 | }; |
| 347 | |
| 348 | accel_pins: accelerometer-pins { |
| 349 | pins-irq { |
| 350 | pinmux = <PINMUX_GPIO12__FUNC_GPIO12>; |
| 351 | bias-pull-up; |
| 352 | input-enable; |
| 353 | }; |
| 354 | }; |
| 355 | |
| 356 | i2c0_pins: i2c0-pins { |
| 357 | pins-bus { |
| 358 | pinmux = <PINMUX_GPIO45__FUNC_SDA0>, |
| 359 | <PINMUX_GPIO46__FUNC_SCL0>; |
| 360 | input-enable; |
| 361 | }; |
| 362 | }; |
| 363 | |
| 364 | i2c1_pins: i2c1-pins { |
| 365 | pins-bus { |
| 366 | pinmux = <PINMUX_GPIO125__FUNC_SDA1>, |
| 367 | <PINMUX_GPIO126__FUNC_SCL1>; |
| 368 | bias-disable; |
| 369 | }; |
| 370 | }; |
| 371 | |
| 372 | i2c2_pins: i2c2-pins { |
| 373 | pins-bus { |
| 374 | pinmux = <PINMUX_GPIO43__FUNC_SDA2>, |
| 375 | <PINMUX_GPIO44__FUNC_SCL2>; |
| 376 | bias-disable; |
| 377 | }; |
| 378 | }; |
| 379 | |
| 380 | i2c3_pins: i2c3-pins { |
| 381 | pins-bus { |
| 382 | pinmux = <PINMUX_GPIO136__FUNC_SDA3>, |
| 383 | <PINMUX_GPIO137__FUNC_SCL3>; |
| 384 | bias-disable; |
| 385 | }; |
| 386 | }; |
| 387 | |
| 388 | i2c4_pins: i2c4-pins { |
| 389 | pins-bus { |
| 390 | pinmux = <PINMUX_GPIO100__FUNC_SDA4>, |
| 391 | <PINMUX_GPIO101__FUNC_SCL4>; |
| 392 | bias-disable; |
| 393 | }; |
| 394 | }; |
| 395 | |
| 396 | uart0_pins: uart0-pins { |
| 397 | pins-rx { |
| 398 | pinmux = <PINMUX_GPIO113__FUNC_URXD0>; |
| 399 | bias-pull-up; |
| 400 | input-enable; |
| 401 | }; |
| 402 | pins-tx { |
| 403 | pinmux = <PINMUX_GPIO114__FUNC_UTXD0>; |
| 404 | output-high; |
| 405 | }; |
| 406 | }; |
| 407 | |
| 408 | uart2_pins: uart2-pins { |
| 409 | pins-rx { |
| 410 | pinmux = <PINMUX_GPIO31__FUNC_URXD2>; |
| 411 | bias-pull-up; |
| 412 | input-enable; |
| 413 | }; |
| 414 | pins-tx { |
| 415 | pinmux = <PINMUX_GPIO32__FUNC_UTXD2>; |
| 416 | }; |
| 417 | }; |
| 418 | }; |
| 419 | |
| 420 | &pmic { |
| 421 | /* |
| 422 | * Smartphones, including the Xperia M5, are equipped with a companion |
| 423 | * MT6332 PMIC: when this is present, the main MT6331 PMIC will fire |
| 424 | * an interrupt on the companion, so we use the MT6332 IRQ GPIO. |
| 425 | */ |
| 426 | interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; |
| 427 | |
| 428 | mt6332-led { |
| 429 | compatible = "mediatek,mt6332-led"; |
| 430 | #address-cells = <1>; |
| 431 | #size-cells = <0>; |
| 432 | |
| 433 | pmic_bl_led: led@0 { |
| 434 | reg = <0>; |
| 435 | label = "backlight-pmic"; |
| 436 | }; |
| 437 | }; |
| 438 | }; |
| 439 | |
| 440 | &pwm0 { |
| 441 | status = "okay"; |
| 442 | }; |
| 443 | |
| 444 | &uart0 { |
| 445 | status = "okay"; |
| 446 | |
| 447 | pinctrl-names = "default"; |
| 448 | pinctrl-0 = <&uart0_pins>; |
| 449 | }; |
| 450 | |
| 451 | &uart2 { |
| 452 | status = "okay"; |
| 453 | |
| 454 | pinctrl-names = "default"; |
| 455 | pinctrl-0 = <&uart2_pins>; |
| 456 | }; |