Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 53633a893a06bd5a0c807287d9cc29337806eaf7 / . / src / arm64 / freescale / fsl-lx2160a-bluebox3.dts
blob: 042c486bdda289333d953000b1d72d26cbc183da [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame^]1// SPDX-License-Identifier: (GPL-2.0 OR MIT)
2//
3// Device Tree file for LX2160A BLUEBOX3
4//
5// Copyright 2020-2021 NXP
6
7/dts-v1/;
8
9#include "fsl-lx2160a.dtsi"
10
11/ {
12 model = "NXP Layerscape LX2160ABLUEBOX3";
13 compatible = "fsl,lx2160a-bluebox3", "fsl,lx2160a";
14
15 aliases {
16 crypto = &crypto;
17 mmc0 = &esdhc0;
18 mmc1 = &esdhc1;
19 serial0 = &uart0;
20 };
21
22 chosen {
23 stdout-path = "serial0:115200n8";
24 };
25
26 sb_3v3: regulator-sb3v3 {
27 compatible = "regulator-fixed";
28 regulator-name = "MC34717-3.3VSB";
29 regulator-min-microvolt = <3300000>;
30 regulator-max-microvolt = <3300000>;
31 regulator-boot-on;
32 regulator-always-on;
33 };
34};
35
36&can0 {
37 status = "okay";
38
39 can-transceiver {
40 max-bitrate = <5000000>;
41 };
42};
43
44&can1 {
45 status = "okay";
46
47 can-transceiver {
48 max-bitrate = <5000000>;
49 };
50};
51
52&crypto {
53 status = "okay";
54};
55
56&dpmac5 {
57 phy-handle = <&aqr113c_phy1>;
58 phy-mode = "usxgmii";
59 managed = "in-band-status";
60};
61
62&dpmac6 {
63 phy-handle = <&aqr113c_phy2>;
64 phy-mode = "usxgmii";
65 managed = "in-band-status";
66};
67
68&dpmac9 {
69 phy-handle = <&aqr113c_phy3>;
70 phy-mode = "usxgmii";
71 managed = "in-band-status";
72};
73
74&dpmac10 {
75 phy-handle = <&aqr113c_phy4>;
76 phy-mode = "usxgmii";
77 managed = "in-band-status";
78};
79
80&dpmac17 {
81 phy-mode = "rgmii";
82 status = "okay";
83
84 fixed-link {
85 speed = <1000>;
86 full-duplex;
87 };
88};
89
90&dpmac18 {
91 phy-mode = "rgmii";
92 status = "okay";
93
94 fixed-link {
95 speed = <1000>;
96 full-duplex;
97 };
98};
99
100&emdio1 {
101 status = "okay";
102
103 aqr113c_phy2: ethernet-phy@0 {
104 compatible = "ethernet-phy-ieee802.3-c45";
105 reg = <0x0>;
106 /* IRQ_10G_PHY2 */
107 interrupts-extended = <&extirq 3 IRQ_TYPE_LEVEL_LOW>;
108 };
109
110 aqr113c_phy1: ethernet-phy@8 {
111 compatible = "ethernet-phy-ieee802.3-c45";
112 reg = <0x8>;
113 /* IRQ_10G_PHY1 */
114 interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
115 };
116
117 sw1_mii3_phy: ethernet-phy@5 {
118 /* AR8035 */
119 compatible = "ethernet-phy-id004d.d072";
120 reg = <0x5>;
121 interrupts-extended = <&extirq 6 IRQ_TYPE_LEVEL_LOW>;
122 };
123
124 sw2_mii3_phy: ethernet-phy@6 {
125 /* AR8035 */
126 compatible = "ethernet-phy-id004d.d072";
127 reg = <0x6>;
128 interrupts-extended = <&extirq 7 IRQ_TYPE_LEVEL_LOW>;
129 };
130};
131
132&emdio2 {
133 status = "okay";
134
135 aqr113c_phy4: ethernet-phy@0 {
136 compatible = "ethernet-phy-ieee802.3-c45";
137 reg = <0x0>;
138 /* IRQ_10G_PHY4 */
139 interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>;
140 };
141
142 aqr113c_phy3: ethernet-phy@8 {
143 compatible = "ethernet-phy-ieee802.3-c45";
144 reg = <0x8>;
145 /* IRQ_10G_PHY3 */
146 interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>;
147 };
148};
149
150&esdhc0 {
151 sd-uhs-sdr104;
152 sd-uhs-sdr50;
153 sd-uhs-sdr25;
154 sd-uhs-sdr12;
155 status = "okay";
156};
157
158&esdhc1 {
159 mmc-hs200-1_8v;
160 mmc-hs400-1_8v;
161 bus-width = <8>;
162 status = "okay";
163};
164
165&fspi {
166 status = "okay";
167
168 mt35xu512aba0: flash@0 {
169 compatible = "jedec,spi-nor";
170 #address-cells = <1>;
171 #size-cells = <1>;
172 reg = <0>;
173 m25p,fast-read;
174 spi-max-frequency = <50000000>;
175 spi-rx-bus-width = <8>;
176 spi-tx-bus-width = <8>;
177 };
178
179 mt35xu512aba1: flash@1 {
180 compatible = "jedec,spi-nor";
181 #address-cells = <1>;
182 #size-cells = <1>;
183 reg = <1>;
184 m25p,fast-read;
185 spi-max-frequency = <50000000>;
186 spi-rx-bus-width = <8>;
187 spi-tx-bus-width = <8>;
188 };
189};
190
191&i2c0 {
192 status = "okay";
193
194 i2c-mux@77 {
195 compatible = "nxp,pca9547";
196 reg = <0x77>;
197 #address-cells = <1>;
198 #size-cells = <0>;
199
200 i2c@2 {
201 #address-cells = <1>;
202 #size-cells = <0>;
203 reg = <0x2>;
204
205 power-monitor@40 {
206 compatible = "ti,ina220";
207 reg = <0x40>;
208 shunt-resistor = <500>;
209 };
210 };
211
212 i2c@3 {
213 #address-cells = <1>;
214 #size-cells = <0>;
215 reg = <0x3>;
216
217 temp2: temperature-sensor@48 {
218 compatible = "nxp,sa56004";
219 reg = <0x48>;
220 vcc-supply = <&sb_3v3>;
221 #thermal-sensor-cells = <1>;
222 };
223
224 temp1: temperature-sensor@4c {
225 compatible = "nxp,sa56004";
226 reg = <0x4c>;
227 vcc-supply = <&sb_3v3>;
228 #thermal-sensor-cells = <1>;
229 };
230 };
231
232 i2c@4 {
233 #address-cells = <1>;
234 #size-cells = <0>;
235 reg = <0x4>;
236
237 rtc@51 {
238 compatible = "nxp,pcf2129";
239 reg = <0x51>;
240 interrupts-extended = <&extirq 11 IRQ_TYPE_LEVEL_LOW>;
241 };
242 };
243
244 i2c@7 {
245 #address-cells = <1>;
246 #size-cells = <0>;
247 reg = <0x7>;
248
249 i2c-mux@75 {
250 compatible = "nxp,pca9547";
251 reg = <0x75>;
252 #address-cells = <1>;
253 #size-cells = <0>;
254
255 i2c@0 {
256 #address-cells = <1>;
257 #size-cells = <0>;
258 reg = <0x0>;
259
260 spi_bridge: spi@28 {
261 compatible = "nxp,sc18is602b";
262 reg = <0x28>;
263 #address-cells = <1>;
264 #size-cells = <0>;
265 };
266 };
267 };
268 };
269 };
270};
271
272&i2c5 {
273 status = "okay";
274
275 i2c-mux@77 {
276 compatible = "nxp,pca9846";
277 reg = <0x77>;
278 #address-cells = <1>;
279 #size-cells = <0>;
280
281 i2c@1 {
282 #address-cells = <1>;
283 #size-cells = <0>;
284 reg = <0x1>;
285
286 /* The I2C multiplexer and temperature sensors are on
287 * the T6 riser card.
288 */
289 i2c-mux@70 {
290 compatible = "nxp,pca9548";
291 reg = <0x70>;
292 #address-cells = <1>;
293 #size-cells = <0>;
294
295 i2c@6 {
296 #address-cells = <1>;
297 #size-cells = <0>;
298 reg = <0x6>;
299
300 q12: temperature-sensor@4c {
301 compatible = "nxp,sa56004";
302 reg = <0x4c>;
303 vcc-supply = <&sb_3v3>;
304 #thermal-sensor-cells = <1>;
305 };
306 };
307
308 i2c@7 {
309 #address-cells = <1>;
310 #size-cells = <0>;
311 reg = <0x7>;
312
313 q11: temperature-sensor@4c {
314 compatible = "nxp,sa56004";
315 reg = <0x4c>;
316 vcc-supply = <&sb_3v3>;
317 #thermal-sensor-cells = <1>;
318 };
319
320 q13: temperature-sensor@48 {
321 compatible = "nxp,sa56004";
322 reg = <0x48>;
323 vcc-supply = <&sb_3v3>;
324 #thermal-sensor-cells = <1>;
325 };
326
327 q14: temperature-sensor@4a {
328 compatible = "nxp,sa56004";
329 reg = <0x4a>;
330 vcc-supply = <&sb_3v3>;
331 #thermal-sensor-cells = <1>;
332 };
333 };
334 };
335 };
336 };
337};
338
339&pcs_mdio5 {
340 status = "okay";
341};
342
343&pcs_mdio6 {
344 status = "okay";
345};
346
347&pcs_mdio9 {
348 status = "okay";
349};
350
351&pcs_mdio10 {
352 status = "okay";
353};
354
355&spi_bridge {
356 sw1: ethernet-switch@0 {
357 compatible = "nxp,sja1110a";
358 reg = <0>;
359 spi-max-frequency = <4000000>;
360 spi-cpol;
361 dsa,member = <0 0>;
362
363 ethernet-ports {
364 #address-cells = <1>;
365 #size-cells = <0>;
366
367 /* Microcontroller port */
368 port@0 {
369 reg = <0>;
370 status = "disabled";
371 };
372
373 /* SW1_P1 */
374 port@1 {
375 reg = <1>;
376 label = "con_2x20";
377 phy-mode = "sgmii";
378
379 fixed-link {
380 speed = <1000>;
381 full-duplex;
382 };
383 };
384
385 port@2 {
386 reg = <2>;
387 ethernet = <&dpmac17>;
388 phy-mode = "rgmii-id";
389 rx-internal-delay-ps = <2000>;
390 tx-internal-delay-ps = <2000>;
391
392 fixed-link {
393 speed = <1000>;
394 full-duplex;
395 };
396 };
397
398 port@3 {
399 reg = <3>;
400 label = "1ge_p1";
401 phy-mode = "rgmii-id";
402 phy-handle = <&sw1_mii3_phy>;
403 };
404
405 sw1p4: port@4 {
406 reg = <4>;
407 link = <&sw2p1>;
408 phy-mode = "sgmii";
409
410 fixed-link {
411 speed = <1000>;
412 full-duplex;
413 };
414 };
415
416 port@5 {
417 reg = <5>;
418 label = "trx1";
419 phy-mode = "internal";
420 phy-handle = <&sw1_port5_base_t1_phy>;
421 };
422
423 port@6 {
424 reg = <6>;
425 label = "trx2";
426 phy-mode = "internal";
427 phy-handle = <&sw1_port6_base_t1_phy>;
428 };
429
430 port@7 {
431 reg = <7>;
432 label = "trx3";
433 phy-mode = "internal";
434 phy-handle = <&sw1_port7_base_t1_phy>;
435 };
436
437 port@8 {
438 reg = <8>;
439 label = "trx4";
440 phy-mode = "internal";
441 phy-handle = <&sw1_port8_base_t1_phy>;
442 };
443
444 port@9 {
445 reg = <9>;
446 label = "trx5";
447 phy-mode = "internal";
448 phy-handle = <&sw1_port9_base_t1_phy>;
449 };
450
451 port@a {
452 reg = <10>;
453 label = "trx6";
454 phy-mode = "internal";
455 phy-handle = <&sw1_port10_base_t1_phy>;
456 };
457 };
458
459 mdios {
460 #address-cells = <1>;
461 #size-cells = <0>;
462
463 mdio@0 {
464 compatible = "nxp,sja1110-base-t1-mdio";
465 #address-cells = <1>;
466 #size-cells = <0>;
467 reg = <0>;
468
469 sw1_port5_base_t1_phy: ethernet-phy@1 {
470 compatible = "ethernet-phy-ieee802.3-c45";
471 reg = <0x1>;
472 };
473
474 sw1_port6_base_t1_phy: ethernet-phy@2 {
475 compatible = "ethernet-phy-ieee802.3-c45";
476 reg = <0x2>;
477 };
478
479 sw1_port7_base_t1_phy: ethernet-phy@3 {
480 compatible = "ethernet-phy-ieee802.3-c45";
481 reg = <0x3>;
482 };
483
484 sw1_port8_base_t1_phy: ethernet-phy@4 {
485 compatible = "ethernet-phy-ieee802.3-c45";
486 reg = <0x4>;
487 };
488
489 sw1_port9_base_t1_phy: ethernet-phy@5 {
490 compatible = "ethernet-phy-ieee802.3-c45";
491 reg = <0x5>;
492 };
493
494 sw1_port10_base_t1_phy: ethernet-phy@6 {
495 compatible = "ethernet-phy-ieee802.3-c45";
496 reg = <0x6>;
497 };
498 };
499 };
500 };
501
502 sw2: ethernet-switch@2 {
503 compatible = "nxp,sja1110a";
504 reg = <2>;
505 spi-max-frequency = <4000000>;
506 spi-cpol;
507 dsa,member = <0 1>;
508
509 ethernet-ports {
510 #address-cells = <1>;
511 #size-cells = <0>;
512
513 /* Microcontroller port */
514 port@0 {
515 reg = <0>;
516 status = "disabled";
517 };
518
519 sw2p1: port@1 {
520 reg = <1>;
521 link = <&sw1p4>;
522 phy-mode = "sgmii";
523
524 fixed-link {
525 speed = <1000>;
526 full-duplex;
527 };
528 };
529
530 port@2 {
531 reg = <2>;
532 ethernet = <&dpmac18>;
533 phy-mode = "rgmii-id";
534 rx-internal-delay-ps = <2000>;
535 tx-internal-delay-ps = <2000>;
536
537 fixed-link {
538 speed = <1000>;
539 full-duplex;
540 };
541 };
542
543 port@3 {
544 reg = <3>;
545 label = "1ge_p2";
546 phy-mode = "rgmii-id";
547 phy-handle = <&sw2_mii3_phy>;
548 };
549
550 port@4 {
551 reg = <4>;
552 label = "to_sw3";
553 phy-mode = "2500base-x";
554
555 fixed-link {
556 speed = <2500>;
557 full-duplex;
558 };
559 };
560
561 port@5 {
562 reg = <5>;
563 label = "trx7";
564 phy-mode = "internal";
565 phy-handle = <&sw2_port5_base_t1_phy>;
566 };
567
568 port@6 {
569 reg = <6>;
570 label = "trx8";
571 phy-mode = "internal";
572 phy-handle = <&sw2_port6_base_t1_phy>;
573 };
574
575 port@7 {
576 reg = <7>;
577 label = "trx9";
578 phy-mode = "internal";
579 phy-handle = <&sw2_port7_base_t1_phy>;
580 };
581
582 port@8 {
583 reg = <8>;
584 label = "trx10";
585 phy-mode = "internal";
586 phy-handle = <&sw2_port8_base_t1_phy>;
587 };
588
589 port@9 {
590 reg = <9>;
591 label = "trx11";
592 phy-mode = "internal";
593 phy-handle = <&sw2_port9_base_t1_phy>;
594 };
595
596 port@a {
597 reg = <10>;
598 label = "trx12";
599 phy-mode = "internal";
600 phy-handle = <&sw2_port10_base_t1_phy>;
601 };
602 };
603
604 mdios {
605 #address-cells = <1>;
606 #size-cells = <0>;
607
608 mdio@0 {
609 compatible = "nxp,sja1110-base-t1-mdio";
610 #address-cells = <1>;
611 #size-cells = <0>;
612 reg = <0>;
613
614 sw2_port5_base_t1_phy: ethernet-phy@1 {
615 compatible = "ethernet-phy-ieee802.3-c45";
616 reg = <0x1>;
617 };
618
619 sw2_port6_base_t1_phy: ethernet-phy@2 {
620 compatible = "ethernet-phy-ieee802.3-c45";
621 reg = <0x2>;
622 };
623
624 sw2_port7_base_t1_phy: ethernet-phy@3 {
625 compatible = "ethernet-phy-ieee802.3-c45";
626 reg = <0x3>;
627 };
628
629 sw2_port8_base_t1_phy: ethernet-phy@4 {
630 compatible = "ethernet-phy-ieee802.3-c45";
631 reg = <0x4>;
632 };
633
634 sw2_port9_base_t1_phy: ethernet-phy@5 {
635 compatible = "ethernet-phy-ieee802.3-c45";
636 reg = <0x5>;
637 };
638
639 sw2_port10_base_t1_phy: ethernet-phy@6 {
640 compatible = "ethernet-phy-ieee802.3-c45";
641 reg = <0x6>;
642 };
643 };
644 };
645 };
646};
647
648&uart0 {
649 status = "okay";
650};
651
652&uart1 {
653 status = "okay";
654};
655
656&usb0 {
657 status = "okay";
658};
659
660&usb1 {
661 status = "okay";
662};