Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | |
| 3 | /dts-v1/; |
| 4 | #include <dt-bindings/input/input.h> |
| 5 | #include "rk3288-rock2-som.dtsi" |
| 6 | |
| 7 | / { |
| 8 | model = "Radxa Rock 2 Square"; |
| 9 | compatible = "radxa,rock2-square", "rockchip,rk3288"; |
| 10 | |
| 11 | chosen { |
| 12 | stdout-path = "serial2:115200n8"; |
| 13 | }; |
| 14 | |
| 15 | adc-keys { |
| 16 | compatible = "adc-keys"; |
| 17 | io-channels = <&saradc 1>; |
| 18 | io-channel-names = "buttons"; |
| 19 | keyup-threshold-microvolt = <1800000>; |
| 20 | |
| 21 | button-recovery { |
| 22 | label = "Recovery"; |
| 23 | linux,code = <KEY_VENDOR>; |
| 24 | press-threshold-microvolt = <0>; |
| 25 | }; |
| 26 | }; |
| 27 | |
| 28 | gpio-keys { |
| 29 | compatible = "gpio-keys"; |
| 30 | |
| 31 | key-power { |
| 32 | gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; |
| 33 | label = "GPIO Power"; |
| 34 | linux,code = <KEY_POWER>; |
| 35 | pinctrl-names = "default"; |
| 36 | pinctrl-0 = <&pwr_key>; |
| 37 | wakeup-source; |
| 38 | }; |
| 39 | }; |
| 40 | |
| 41 | gpio-leds { |
| 42 | compatible = "gpio-leds"; |
| 43 | |
| 44 | heartbeat_led: led-0 { |
| 45 | gpios = <&gpio7 RK_PB7 GPIO_ACTIVE_LOW>; |
| 46 | label = "rock2:green:state1"; |
| 47 | linux,default-trigger = "heartbeat"; |
| 48 | }; |
| 49 | |
| 50 | mmc_led: led-1 { |
| 51 | gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>; |
| 52 | label = "rock2:blue:state2"; |
| 53 | linux,default-trigger = "mmc0"; |
| 54 | }; |
| 55 | }; |
| 56 | |
| 57 | ir: ir-receiver { |
| 58 | compatible = "gpio-ir-receiver"; |
| 59 | gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>; |
| 60 | pinctrl-names = "default"; |
| 61 | pinctrl-0 = <&ir_int>; |
| 62 | }; |
| 63 | |
| 64 | sound { |
| 65 | compatible = "simple-audio-card"; |
| 66 | simple-audio-card,name = "SPDIF"; |
| 67 | simple-audio-card,dai-link@1 { /* S/PDIF - S/PDIF */ |
| 68 | cpu { sound-dai = <&spdif>; }; |
| 69 | codec { sound-dai = <&spdif_out>; }; |
| 70 | }; |
| 71 | }; |
| 72 | |
| 73 | sata_pwr: sata-prw-regulator { |
| 74 | compatible = "regulator-fixed"; |
| 75 | enable-active-high; |
| 76 | gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>; |
| 77 | pinctrl-names = "default"; |
| 78 | pinctrl-0 = <&sata_pwr_en>; |
| 79 | /* Always turn on the 5V sata power connector */ |
| 80 | regulator-always-on; |
| 81 | regulator-name = "sata_pwr"; |
| 82 | }; |
| 83 | |
| 84 | spdif_out: spdif-out { |
| 85 | compatible = "linux,spdif-dit"; |
| 86 | #sound-dai-cells = <0>; |
| 87 | }; |
| 88 | |
| 89 | sound-i2s { |
| 90 | compatible = "rockchip,rk3288-hdmi-analog"; |
| 91 | pinctrl-names = "default"; |
| 92 | pinctrl-0 = <&phone_ctl>, <&hp_det>; |
| 93 | rockchip,audio-codec = <&es8388>; |
| 94 | rockchip,hp-det-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>; |
| 95 | rockchip,hp-en-gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>; |
| 96 | rockchip,i2s-controller = <&i2s>; |
| 97 | rockchip,model = "I2S"; |
| 98 | rockchip,routing = "Analog", "LOUT2", |
| 99 | "Analog", "ROUT2"; |
| 100 | }; |
| 101 | |
| 102 | sdio_pwrseq: sdio-pwrseq { |
| 103 | compatible = "mmc-pwrseq-simple"; |
| 104 | clocks = <&hym8563>; |
| 105 | clock-names = "ext_clock"; |
| 106 | pinctrl-names = "default"; |
| 107 | pinctrl-0 = <&wifi_enable>; |
| 108 | reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; |
| 109 | }; |
| 110 | |
| 111 | vcc_usb_host: vcc-host-regulator { |
| 112 | compatible = "regulator-fixed"; |
| 113 | enable-active-high; |
| 114 | gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; |
| 115 | pinctrl-names = "default"; |
| 116 | pinctrl-0 = <&host_vbus_drv>; |
| 117 | regulator-name = "vcc_host"; |
| 118 | }; |
| 119 | |
| 120 | vcc_sd: sdmmc-regulator { |
| 121 | compatible = "regulator-fixed"; |
| 122 | gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; |
| 123 | pinctrl-names = "default"; |
| 124 | pinctrl-0 = <&sdmmc_pwr>; |
| 125 | regulator-name = "vcc_sd"; |
| 126 | regulator-min-microvolt = <3300000>; |
| 127 | regulator-max-microvolt = <3300000>; |
| 128 | vin-supply = <&vcc_io>; |
| 129 | }; |
| 130 | }; |
| 131 | |
| 132 | &sdio0 { |
| 133 | bus-width = <4>; |
| 134 | cap-sd-highspeed; |
| 135 | cap-sdio-irq; |
| 136 | mmc-pwrseq = <&sdio_pwrseq>; |
| 137 | non-removable; |
| 138 | pinctrl-names = "default"; |
| 139 | pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk &sdio0_int>; |
| 140 | vmmc-supply = <&vcc_io>; |
| 141 | vqmmc-supply = <&vcc_18>; |
| 142 | status = "okay"; |
| 143 | }; |
| 144 | |
| 145 | &sdmmc { |
| 146 | bus-width = <4>; |
| 147 | cap-mmc-highspeed; |
| 148 | cap-sd-highspeed; |
| 149 | card-detect-delay = <200>; |
| 150 | disable-wp; /* wp not hooked up */ |
| 151 | pinctrl-names = "default"; |
| 152 | pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; |
| 153 | vmmc-supply = <&vcc_sd>; |
| 154 | vqmmc-supply = <&vccio_sd>; |
| 155 | status = "okay"; |
| 156 | }; |
| 157 | |
| 158 | &gmac { |
| 159 | status = "okay"; |
| 160 | }; |
| 161 | |
| 162 | &hdmi { |
| 163 | ddc-i2c-bus = <&i2c5>; |
| 164 | status = "okay"; |
| 165 | }; |
| 166 | |
| 167 | &i2c0 { |
| 168 | hym8563: rtc@51 { |
| 169 | compatible = "haoyu,hym8563"; |
| 170 | reg = <0x51>; |
| 171 | #clock-cells = <0>; |
| 172 | clock-output-names = "xin32k"; |
| 173 | interrupt-parent = <&gpio0>; |
| 174 | interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; |
| 175 | pinctrl-names = "default"; |
| 176 | pinctrl-0 = <&pmic_int>; |
| 177 | |
| 178 | }; |
| 179 | }; |
| 180 | |
| 181 | &i2c2 { |
| 182 | status = "okay"; |
| 183 | |
| 184 | es8388: es8388@10 { |
| 185 | compatible = "everest,es8388", "everest,es8328"; |
| 186 | reg = <0x10>; |
| 187 | AVDD-supply = <&vccio_codec>; |
| 188 | DVDD-supply = <&vccio_codec>; |
| 189 | HPVDD-supply = <&vccio_codec>; |
| 190 | PVDD-supply = <&vccio_codec>; |
| 191 | clocks = <&cru SCLK_I2S0_OUT>; |
| 192 | }; |
| 193 | }; |
| 194 | |
| 195 | &i2c5 { |
| 196 | status = "okay"; |
| 197 | }; |
| 198 | |
| 199 | &i2s { |
| 200 | status = "okay"; |
| 201 | }; |
| 202 | |
| 203 | &pinctrl { |
| 204 | ir { |
| 205 | ir_int: ir-int { |
| 206 | rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; |
| 207 | }; |
| 208 | }; |
| 209 | |
| 210 | keys { |
| 211 | pwr_key: pwr-key { |
| 212 | rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; |
| 213 | }; |
| 214 | }; |
| 215 | |
| 216 | pmic { |
| 217 | pmic_int: pmic-int { |
| 218 | rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; |
| 219 | }; |
| 220 | }; |
| 221 | |
| 222 | headphone { |
| 223 | hp_det: hp-det { |
| 224 | rockchip,pins = <7 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 225 | }; |
| 226 | |
| 227 | phone_ctl: phone-ctl { |
| 228 | rockchip,pins = <8 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; |
| 229 | }; |
| 230 | }; |
| 231 | |
| 232 | usb { |
| 233 | host_vbus_drv: host-vbus-drv { |
| 234 | rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 235 | }; |
| 236 | }; |
| 237 | |
| 238 | sata { |
| 239 | sata_pwr_en: sata-pwr-en { |
| 240 | rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 241 | }; |
| 242 | }; |
| 243 | |
| 244 | sdmmc { |
| 245 | sdmmc_pwr: sdmmc-pwr { |
| 246 | rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 247 | }; |
| 248 | }; |
| 249 | |
| 250 | sdio { |
| 251 | wifi_enable: wifi-enable { |
| 252 | rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 253 | }; |
| 254 | }; |
| 255 | }; |
| 256 | |
| 257 | &saradc { |
| 258 | status = "okay"; |
| 259 | }; |
| 260 | |
| 261 | &spdif { |
| 262 | status = "okay"; |
| 263 | }; |
| 264 | |
| 265 | &uart2 { |
| 266 | status = "okay"; |
| 267 | }; |
| 268 | |
| 269 | &usbphy { |
| 270 | status = "okay"; |
| 271 | }; |
| 272 | |
| 273 | &usbphy1 { |
| 274 | vbus-supply = <&vcc_usb_host>; |
| 275 | }; |
| 276 | |
| 277 | &usb_host0_ehci { |
| 278 | status = "okay"; |
| 279 | }; |
| 280 | |
| 281 | &usb_host1 { |
| 282 | status = "okay"; |
| 283 | }; |
| 284 | |
| 285 | &usb_otg { |
| 286 | status = "okay"; |
| 287 | }; |