Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 53633a893a06bd5a0c807287d9cc29337806eaf7 / . / src / arm / qcom / qcom-msm8960-cdp.dts
blob: 6c1bc3818883ca34f014e02e1c13e8c08ae717e8 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame^]1// SPDX-License-Identifier: GPL-2.0
2#include <dt-bindings/input/input.h>
3
4#include "qcom-msm8960.dtsi"
5
6/ {
7 model = "Qualcomm MSM8960 CDP";
8 compatible = "qcom,msm8960-cdp", "qcom,msm8960";
9
10 aliases {
11 serial0 = &gsbi5_serial;
12 };
13
14 chosen {
15 stdout-path = "serial0:115200n8";
16 };
17
18 ext_l2: gpio-regulator {
19 compatible = "regulator-fixed";
20 regulator-name = "ext_l2";
21 gpio = <&msmgpio 91 0>;
22 startup-delay-us = <10000>;
23 enable-active-high;
24 };
25};
26
27&gsbi1 {
28 qcom,mode = <GSBI_PROT_SPI>;
29 pinctrl-names = "default";
30 pinctrl-0 = <&spi1_default>;
31 status = "okay";
32};
33
34&gsbi1_spi {
35 status = "okay";
36
37 ethernet@0 {
38 compatible = "micrel,ks8851";
39 reg = <0>;
40 interrupt-parent = <&msmgpio>;
41 interrupts = <90 IRQ_TYPE_LEVEL_LOW>;
42 spi-max-frequency = <5400000>;
43 vdd-supply = <&ext_l2>;
44 vdd-io-supply = <&pm8921_lvs6>;
45 reset-gpios = <&msmgpio 89 0>;
46 };
47};
48
49&gsbi5 {
50 qcom,mode = <GSBI_PROT_I2C_UART>;
51 status = "okay";
52};
53
54&gsbi5_serial {
55 status = "okay";
56};
57
58&msmgpio {
59 spi1_default: spi1-default-state {
60 mosi-pins {
61 pins = "gpio6";
62 function = "gsbi1";
63 drive-strength = <12>;
64 bias-disable;
65 };
66
67 miso-pins {
68 pins = "gpio7";
69 function = "gsbi1";
70 drive-strength = <12>;
71 bias-disable;
72 };
73
74 cs-pins {
75 pins = "gpio8";
76 function = "gsbi1";
77 drive-strength = <12>;
78 bias-disable;
79 output-low;
80 };
81
82 clk-pins {
83 pins = "gpio9";
84 function = "gsbi1";
85 drive-strength = <12>;
86 bias-disable;
87 };
88 };
89};
90
91&pmicintc {
92 keypad@148 {
93 linux,keymap = <
94 MATRIX_KEY(0, 0, KEY_VOLUMEUP)
95 MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
96 MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
97 MATRIX_KEY(0, 3, KEY_CAMERA)
98 >;
99 keypad,num-rows = <1>;
100 keypad,num-columns = <5>;
101 };
102};
103
104&rpm {
105 regulators {
106 compatible = "qcom,rpm-pm8921-regulators";
107 vin_lvs1_3_6-supply = <&pm8921_s4>;
108 vin_lvs2-supply = <&pm8921_s4>;
109 vin_lvs4_5_7-supply = <&pm8921_s4>;
110 vdd_ncp-supply = <&pm8921_l6>;
111 vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
112 vdd_l21_l23_l29-supply = <&pm8921_s8>;
113 vdd_l24-supply = <&pm8921_s1>;
114 vdd_l25-supply = <&pm8921_s1>;
115 vdd_l27-supply = <&pm8921_s7>;
116 vdd_l28-supply = <&pm8921_s7>;
117
118 /* Buck SMPS */
119 pm8921_s1: s1 {
120 regulator-always-on;
121 regulator-min-microvolt = <1225000>;
122 regulator-max-microvolt = <1225000>;
123 qcom,switch-mode-frequency = <3200000>;
124 bias-pull-down;
125 };
126
127 pm8921_s2: s2 {
128 regulator-min-microvolt = <1300000>;
129 regulator-max-microvolt = <1300000>;
130 qcom,switch-mode-frequency = <1600000>;
131 bias-pull-down;
132 };
133
134 pm8921_s3: s3 {
135 regulator-min-microvolt = <500000>;
136 regulator-max-microvolt = <1150000>;
137 qcom,switch-mode-frequency = <4800000>;
138 bias-pull-down;
139 };
140
141 pm8921_s4: s4 {
142 regulator-always-on;
143 regulator-min-microvolt = <1800000>;
144 regulator-max-microvolt = <1800000>;
145 qcom,switch-mode-frequency = <1600000>;
146 bias-pull-down;
147 qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
148 };
149
150 pm8921_s7: s7 {
151 regulator-min-microvolt = <1150000>;
152 regulator-max-microvolt = <1150000>;
153 qcom,switch-mode-frequency = <3200000>;
154 bias-pull-down;
155 };
156
157 pm8921_s8: s8 {
158 regulator-always-on;
159 regulator-min-microvolt = <2050000>;
160 regulator-max-microvolt = <2050000>;
161 qcom,switch-mode-frequency = <1600000>;
162 bias-pull-down;
163 };
164
165 /* PMOS LDO */
166 pm8921_l1: l1 {
167 regulator-always-on;
168 regulator-min-microvolt = <1050000>;
169 regulator-max-microvolt = <1050000>;
170 bias-pull-down;
171 };
172
173 pm8921_l2: l2 {
174 regulator-min-microvolt = <1200000>;
175 regulator-max-microvolt = <1200000>;
176 bias-pull-down;
177 };
178
179 pm8921_l3: l3 {
180 regulator-min-microvolt = <3075000>;
181 regulator-max-microvolt = <3075000>;
182 bias-pull-down;
183 };
184
185 pm8921_l4: l4 {
186 regulator-always-on;
187 regulator-min-microvolt = <1800000>;
188 regulator-max-microvolt = <1800000>;
189 bias-pull-down;
190 };
191
192 pm8921_l5: l5 {
193 regulator-min-microvolt = <2950000>;
194 regulator-max-microvolt = <2950000>;
195 bias-pull-down;
196 };
197
198 pm8921_l6: l6 {
199 regulator-min-microvolt = <2950000>;
200 regulator-max-microvolt = <2950000>;
201 bias-pull-down;
202 };
203
204 pm8921_l7: l7 {
205 regulator-always-on;
206 regulator-min-microvolt = <1850000>;
207 regulator-max-microvolt = <2950000>;
208 bias-pull-down;
209 };
210
211 pm8921_l8: l8 {
212 regulator-min-microvolt = <2800000>;
213 regulator-max-microvolt = <3000000>;
214 bias-pull-down;
215 };
216
217 pm8921_l9: l9 {
218 regulator-min-microvolt = <3000000>;
219 regulator-max-microvolt = <3000000>;
220 bias-pull-down;
221 };
222
223 pm8921_l10: l10 {
224 regulator-min-microvolt = <3000000>;
225 regulator-max-microvolt = <3000000>;
226 bias-pull-down;
227 };
228
229 pm8921_l11: l11 {
230 regulator-min-microvolt = <2850000>;
231 regulator-max-microvolt = <2850000>;
232 bias-pull-down;
233 };
234
235 pm8921_l12: l12 {
236 regulator-min-microvolt = <1200000>;
237 regulator-max-microvolt = <1200000>;
238 bias-pull-down;
239 };
240
241 pm8921_l14: l14 {
242 regulator-min-microvolt = <1800000>;
243 regulator-max-microvolt = <1800000>;
244 bias-pull-down;
245 };
246
247 pm8921_l15: l15 {
248 regulator-min-microvolt = <1800000>;
249 regulator-max-microvolt = <2950000>;
250 bias-pull-down;
251 };
252
253 pm8921_l16: l16 {
254 regulator-min-microvolt = <2800000>;
255 regulator-max-microvolt = <2800000>;
256 bias-pull-down;
257 };
258
259 pm8921_l17: l17 {
260 regulator-min-microvolt = <1800000>;
261 regulator-max-microvolt = <2950000>;
262 bias-pull-down;
263 };
264
265 pm8921_l18: l18 {
266 regulator-min-microvolt = <1300000>;
267 regulator-max-microvolt = <1300000>;
268 bias-pull-down;
269 };
270
271 pm8921_l21: l21 {
272 regulator-min-microvolt = <1900000>;
273 regulator-max-microvolt = <1900000>;
274 bias-pull-down;
275 };
276
277 pm8921_l22: l22 {
278 regulator-min-microvolt = <2750000>;
279 regulator-max-microvolt = <2750000>;
280 bias-pull-down;
281 };
282
283 pm8921_l23: l23 {
284 regulator-always-on;
285 regulator-min-microvolt = <1800000>;
286 regulator-max-microvolt = <1800000>;
287 bias-pull-down;
288 };
289
290 pm8921_l24: l24 {
291 regulator-min-microvolt = <750000>;
292 regulator-max-microvolt = <1150000>;
293 bias-pull-down;
294 };
295
296 pm8921_l25: l25 {
297 regulator-always-on;
298 regulator-min-microvolt = <1250000>;
299 regulator-max-microvolt = <1250000>;
300 bias-pull-down;
301 };
302
303 /* Low Voltage Switch */
304 pm8921_lvs1: lvs1 {
305 bias-pull-down;
306 };
307
308 pm8921_lvs2: lvs2 {
309 bias-pull-down;
310 };
311
312 pm8921_lvs3: lvs3 {
313 bias-pull-down;
314 };
315
316 pm8921_lvs4: lvs4 {
317 bias-pull-down;
318 };
319
320 pm8921_lvs5: lvs5 {
321 bias-pull-down;
322 };
323
324 pm8921_lvs6: lvs6 {
325 bias-pull-down;
326 };
327
328 pm8921_lvs7: lvs7 {
329 bias-pull-down;
330 };
331
332 pm8921_ncp: ncp {
333 regulator-min-microvolt = <1800000>;
334 regulator-max-microvolt = <1800000>;
335 qcom,switch-mode-frequency = <1600000>;
336 };
337 };
338};
339
340/* eMMC */
341&sdcc1 {
342 status = "okay";
343};
344
345/* External micro SD card */
346&sdcc3 {
347 status = "okay";
348};