Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | #include "qcom-apq8064-v2.0.dtsi" |
| 3 | #include <dt-bindings/gpio/gpio.h> |
| 4 | #include <dt-bindings/input/input.h> |
| 5 | #include <dt-bindings/mfd/qcom-rpm.h> |
| 6 | #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| 7 | |
| 8 | / { |
| 9 | model = "Sony Xperia Z"; |
| 10 | compatible = "sony,xperia-yuga", "qcom,apq8064"; |
| 11 | chassis-type = "handset"; |
| 12 | |
| 13 | aliases { |
| 14 | serial0 = &gsbi5_serial; |
| 15 | }; |
| 16 | |
| 17 | chosen { |
| 18 | stdout-path = "serial0:115200n8"; |
| 19 | }; |
| 20 | |
| 21 | gpio-keys { |
| 22 | compatible = "gpio-keys"; |
| 23 | |
| 24 | pinctrl-names = "default"; |
| 25 | pinctrl-0 = <&gpio_keys_pin_a>; |
| 26 | |
| 27 | key-camera-focus { |
| 28 | label = "camera_focus"; |
| 29 | gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>; |
| 30 | linux,input-type = <1>; |
| 31 | linux,code = <KEY_CAMERA_FOCUS>; |
| 32 | }; |
| 33 | |
| 34 | key-camera-snapshot { |
| 35 | label = "camera_snapshot"; |
| 36 | gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>; |
| 37 | linux,input-type = <1>; |
| 38 | linux,code = <KEY_CAMERA>; |
| 39 | }; |
| 40 | |
| 41 | key-volume-down { |
| 42 | label = "volume_down"; |
| 43 | gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>; |
| 44 | linux,input-type = <1>; |
| 45 | linux,code = <KEY_VOLUMEDOWN>; |
| 46 | }; |
| 47 | |
| 48 | key-volume-up { |
| 49 | label = "volume_up"; |
| 50 | gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>; |
| 51 | linux,input-type = <1>; |
| 52 | linux,code = <KEY_VOLUMEUP>; |
| 53 | }; |
| 54 | }; |
| 55 | }; |
| 56 | |
| 57 | &gsbi5 { |
| 58 | qcom,mode = <GSBI_PROT_I2C_UART>; |
| 59 | status = "okay"; |
| 60 | }; |
| 61 | |
| 62 | &gsbi5_serial { |
| 63 | pinctrl-names = "default"; |
| 64 | pinctrl-0 = <&gsbi5_uart_pin_a>; |
| 65 | status = "okay"; |
| 66 | }; |
| 67 | |
| 68 | &pm8921_gpio { |
| 69 | gpio_keys_pin_a: gpio-keys-active-state { |
| 70 | pins = "gpio3", "gpio4", "gpio29", "gpio35"; |
| 71 | function = "normal"; |
| 72 | |
| 73 | bias-pull-up; |
| 74 | drive-push-pull; |
| 75 | input-enable; |
| 76 | power-source = <2>; |
| 77 | qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; |
| 78 | qcom,pull-up-strength = <0>; |
| 79 | }; |
| 80 | }; |
| 81 | |
| 82 | &riva { |
| 83 | pinctrl-names = "default"; |
| 84 | pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>; |
| 85 | status = "okay"; |
| 86 | }; |
| 87 | |
| 88 | &rpm { |
| 89 | regulators { |
| 90 | vin_l1_l2_l12_l18-supply = <&pm8921_s4>; |
| 91 | vin_lvs_1_3_6-supply = <&pm8921_s4>; |
| 92 | vin_lvs_4_5_7-supply = <&pm8921_s4>; |
| 93 | vin_ncp-supply = <&pm8921_l6>; |
| 94 | vin_lvs2-supply = <&pm8921_s4>; |
| 95 | vin_l24-supply = <&pm8921_s1>; |
| 96 | vin_l25-supply = <&pm8921_s1>; |
| 97 | vin_l27-supply = <&pm8921_s7>; |
| 98 | vin_l28-supply = <&pm8921_s7>; |
| 99 | |
| 100 | /* Buck SMPS */ |
| 101 | s1 { |
| 102 | regulator-always-on; |
| 103 | regulator-min-microvolt = <1225000>; |
| 104 | regulator-max-microvolt = <1225000>; |
| 105 | qcom,switch-mode-frequency = <3200000>; |
| 106 | bias-pull-down; |
| 107 | }; |
| 108 | |
| 109 | s2 { |
| 110 | regulator-min-microvolt = <1300000>; |
| 111 | regulator-max-microvolt = <1300000>; |
| 112 | qcom,switch-mode-frequency = <1600000>; |
| 113 | bias-pull-down; |
| 114 | }; |
| 115 | |
| 116 | s3 { |
| 117 | regulator-min-microvolt = <500000>; |
| 118 | regulator-max-microvolt = <1150000>; |
| 119 | qcom,switch-mode-frequency = <4800000>; |
| 120 | bias-pull-down; |
| 121 | }; |
| 122 | |
| 123 | s4 { |
| 124 | regulator-always-on; |
| 125 | regulator-min-microvolt = <1800000>; |
| 126 | regulator-max-microvolt = <1800000>; |
| 127 | qcom,switch-mode-frequency = <1600000>; |
| 128 | bias-pull-down; |
| 129 | qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; |
| 130 | }; |
| 131 | |
| 132 | s7 { |
| 133 | regulator-min-microvolt = <1300000>; |
| 134 | regulator-max-microvolt = <1300000>; |
| 135 | qcom,switch-mode-frequency = <3200000>; |
| 136 | }; |
| 137 | |
| 138 | s8 { |
| 139 | regulator-min-microvolt = <2200000>; |
| 140 | regulator-max-microvolt = <2200000>; |
| 141 | qcom,switch-mode-frequency = <1600000>; |
| 142 | }; |
| 143 | |
| 144 | /* PMOS LDO */ |
| 145 | l1 { |
| 146 | regulator-always-on; |
| 147 | regulator-min-microvolt = <1100000>; |
| 148 | regulator-max-microvolt = <1100000>; |
| 149 | bias-pull-down; |
| 150 | }; |
| 151 | |
| 152 | l2 { |
| 153 | regulator-min-microvolt = <1200000>; |
| 154 | regulator-max-microvolt = <1200000>; |
| 155 | bias-pull-down; |
| 156 | }; |
| 157 | |
| 158 | l3 { |
| 159 | regulator-min-microvolt = <3075000>; |
| 160 | regulator-max-microvolt = <3075000>; |
| 161 | bias-pull-down; |
| 162 | }; |
| 163 | |
| 164 | l4 { |
| 165 | regulator-always-on; |
| 166 | regulator-min-microvolt = <1800000>; |
| 167 | regulator-max-microvolt = <1800000>; |
| 168 | bias-pull-down; |
| 169 | }; |
| 170 | |
| 171 | l5 { |
| 172 | regulator-min-microvolt = <2950000>; |
| 173 | regulator-max-microvolt = <2950000>; |
| 174 | bias-pull-down; |
| 175 | }; |
| 176 | |
| 177 | l6 { |
| 178 | regulator-min-microvolt = <2950000>; |
| 179 | regulator-max-microvolt = <2950000>; |
| 180 | bias-pull-down; |
| 181 | }; |
| 182 | |
| 183 | l7 { |
| 184 | regulator-min-microvolt = <1850000>; |
| 185 | regulator-max-microvolt = <2950000>; |
| 186 | bias-pull-down; |
| 187 | }; |
| 188 | |
| 189 | l8 { |
| 190 | regulator-min-microvolt = <2800000>; |
| 191 | regulator-max-microvolt = <2800000>; |
| 192 | bias-pull-down; |
| 193 | }; |
| 194 | |
| 195 | l9 { |
| 196 | regulator-min-microvolt = <3000000>; |
| 197 | regulator-max-microvolt = <3000000>; |
| 198 | bias-pull-down; |
| 199 | }; |
| 200 | |
| 201 | l10 { |
| 202 | regulator-min-microvolt = <2900000>; |
| 203 | regulator-max-microvolt = <2900000>; |
| 204 | bias-pull-down; |
| 205 | }; |
| 206 | |
| 207 | l11 { |
| 208 | regulator-min-microvolt = <3000000>; |
| 209 | regulator-max-microvolt = <3000000>; |
| 210 | bias-pull-down; |
| 211 | }; |
| 212 | |
| 213 | l12 { |
| 214 | regulator-min-microvolt = <1200000>; |
| 215 | regulator-max-microvolt = <1200000>; |
| 216 | bias-pull-down; |
| 217 | }; |
| 218 | |
| 219 | l14 { |
| 220 | regulator-min-microvolt = <1800000>; |
| 221 | regulator-max-microvolt = <1800000>; |
| 222 | bias-pull-down; |
| 223 | }; |
| 224 | |
| 225 | l15 { |
| 226 | regulator-min-microvolt = <1800000>; |
| 227 | regulator-max-microvolt = <2950000>; |
| 228 | bias-pull-down; |
| 229 | }; |
| 230 | |
| 231 | l16 { |
| 232 | regulator-min-microvolt = <2800000>; |
| 233 | regulator-max-microvolt = <2800000>; |
| 234 | bias-pull-down; |
| 235 | }; |
| 236 | |
| 237 | l17 { |
| 238 | regulator-min-microvolt = <2000000>; |
| 239 | regulator-max-microvolt = <2000000>; |
| 240 | bias-pull-down; |
| 241 | }; |
| 242 | |
| 243 | l18 { |
| 244 | regulator-min-microvolt = <1200000>; |
| 245 | regulator-max-microvolt = <1200000>; |
| 246 | bias-pull-down; |
| 247 | }; |
| 248 | |
| 249 | l21 { |
| 250 | regulator-min-microvolt = <1050000>; |
| 251 | regulator-max-microvolt = <1050000>; |
| 252 | bias-pull-down; |
| 253 | }; |
| 254 | |
| 255 | l22 { |
| 256 | regulator-min-microvolt = <2600000>; |
| 257 | regulator-max-microvolt = <2600000>; |
| 258 | bias-pull-down; |
| 259 | }; |
| 260 | |
| 261 | l23 { |
| 262 | regulator-min-microvolt = <1800000>; |
| 263 | regulator-max-microvolt = <1800000>; |
| 264 | bias-pull-down; |
| 265 | }; |
| 266 | |
| 267 | l24 { |
| 268 | regulator-min-microvolt = <750000>; |
| 269 | regulator-max-microvolt = <1150000>; |
| 270 | bias-pull-down; |
| 271 | }; |
| 272 | |
| 273 | l25 { |
| 274 | regulator-always-on; |
| 275 | regulator-min-microvolt = <1250000>; |
| 276 | regulator-max-microvolt = <1250000>; |
| 277 | bias-pull-down; |
| 278 | }; |
| 279 | |
| 280 | l27 { |
| 281 | regulator-min-microvolt = <1100000>; |
| 282 | regulator-max-microvolt = <1100000>; |
| 283 | }; |
| 284 | |
| 285 | l28 { |
| 286 | regulator-min-microvolt = <1050000>; |
| 287 | regulator-max-microvolt = <1050000>; |
| 288 | bias-pull-down; |
| 289 | }; |
| 290 | |
| 291 | l29 { |
| 292 | regulator-min-microvolt = <2000000>; |
| 293 | regulator-max-microvolt = <2000000>; |
| 294 | bias-pull-down; |
| 295 | }; |
| 296 | |
| 297 | /* Low Voltage Switch */ |
| 298 | lvs1 { |
| 299 | bias-pull-down; |
| 300 | }; |
| 301 | |
| 302 | lvs2 { |
| 303 | bias-pull-down; |
| 304 | }; |
| 305 | |
| 306 | lvs3 { |
| 307 | bias-pull-down; |
| 308 | }; |
| 309 | |
| 310 | lvs4 { |
| 311 | bias-pull-down; |
| 312 | }; |
| 313 | |
| 314 | lvs5 { |
| 315 | bias-pull-down; |
| 316 | }; |
| 317 | |
| 318 | lvs6 { |
| 319 | bias-pull-down; |
| 320 | }; |
| 321 | |
| 322 | lvs7 { |
| 323 | bias-pull-down; |
| 324 | }; |
| 325 | |
| 326 | usb-switch {}; |
| 327 | |
| 328 | hdmi-switch {}; |
| 329 | |
| 330 | ncp { |
| 331 | regulator-min-microvolt = <1800000>; |
| 332 | regulator-max-microvolt = <1800000>; |
| 333 | qcom,switch-mode-frequency = <1600000>; |
| 334 | }; |
| 335 | }; |
| 336 | }; |
| 337 | |
| 338 | &sdcc1 { |
| 339 | vmmc-supply = <&pm8921_l5>; |
| 340 | vqmmc-supply = <&pm8921_s4>; |
| 341 | status = "okay"; |
| 342 | }; |
| 343 | |
| 344 | &sdcc3 { |
| 345 | vmmc-supply = <&pm8921_l6>; |
| 346 | cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; |
| 347 | |
| 348 | pinctrl-names = "default"; |
| 349 | pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>; |
| 350 | |
| 351 | status = "okay"; |
| 352 | }; |
| 353 | |
| 354 | &tlmm_pinmux { |
| 355 | gsbi5_uart_pin_a: gsbi5-uart-pin-active { |
| 356 | rx { |
| 357 | pins = "gpio52"; |
| 358 | function = "gsbi5"; |
| 359 | drive-strength = <2>; |
| 360 | bias-pull-up; |
| 361 | }; |
| 362 | |
| 363 | tx { |
| 364 | pins = "gpio51"; |
| 365 | function = "gsbi5"; |
| 366 | drive-strength = <4>; |
| 367 | bias-disable; |
| 368 | }; |
| 369 | }; |
| 370 | |
| 371 | |
| 372 | sdcc3_cd_pin_a: sdcc3-cd-pin-active { |
| 373 | pins = "gpio26"; |
| 374 | function = "gpio"; |
| 375 | |
| 376 | drive-strength = <2>; |
| 377 | bias-disable; |
| 378 | }; |
| 379 | }; |
| 380 | |
| 381 | &usb_hs1_phy { |
| 382 | v3p3-supply = <&pm8921_l3>; |
| 383 | v1p8-supply = <&pm8921_l4>; |
| 384 | }; |
| 385 | |
| 386 | &usb1 { |
| 387 | dr_mode = "otg"; |
| 388 | status = "okay"; |
| 389 | }; |