Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 53633a893a06bd5a0c807287d9cc29337806eaf7 / . / src / arm / qcom / qcom-apq8026-samsung-matisse-wifi.dts
blob: f516e0426bb9e82ec71f964c315056ff558261c6 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame^]1// SPDX-License-Identifier: BSD-3-Clause
2/*
3 * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com>
4 */
5
6/dts-v1/;
7
8#include <dt-bindings/input/input.h>
9#include "qcom-msm8226.dtsi"
10#include "qcom-pm8226.dtsi"
11
12/delete-node/ &adsp_region;
13/delete-node/ &smem_region;
14
15/ {
16 model = "Samsung Galaxy Tab 4 10.1";
17 compatible = "samsung,matisse-wifi", "qcom,apq8026";
18 chassis-type = "tablet";
19
20 aliases {
21 mmc0 = &sdhc_1; /* SDC1 eMMC slot */
22 mmc1 = &sdhc_2; /* SDC2 SD card slot */
23 display0 = &framebuffer0;
24 };
25
26 chosen {
27 #address-cells = <1>;
28 #size-cells = <1>;
29 ranges;
30
31 stdout-path = "display0";
32
33 framebuffer0: framebuffer@3200000 {
34 compatible = "simple-framebuffer";
35 reg = <0x03200000 0x800000>;
36 width = <1280>;
37 height = <800>;
38 stride = <(1280 * 3)>;
39 format = "r8g8b8";
40 };
41 };
42
43 gpio-hall-sensor {
44 compatible = "gpio-keys";
45
46 event-hall-sensor {
47 label = "Hall Effect Sensor";
48 gpios = <&tlmm 110 GPIO_ACTIVE_LOW>;
49 linux,input-type = <EV_SW>;
50 linux,code = <SW_LID>;
51 debounce-interval = <15>;
52 linux,can-disable;
53 wakeup-source;
54 };
55 };
56
57 gpio-keys {
58 compatible = "gpio-keys";
59 autorepeat;
60
61 key-home {
62 label = "Home";
63 gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
64 linux,code = <KEY_HOMEPAGE>;
65 debounce-interval = <15>;
66 };
67
68 key-volume-down {
69 label = "Volume Down";
70 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
71 linux,code = <KEY_VOLUMEDOWN>;
72 debounce-interval = <15>;
73 };
74
75 key-volume-up {
76 label = "Volume Up";
77 gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
78 linux,code = <KEY_VOLUMEUP>;
79 debounce-interval = <15>;
80 };
81 };
82
83 i2c-backlight {
84 compatible = "i2c-gpio";
85 sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
86 scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
87
88 pinctrl-0 = <&backlight_i2c_default_state>;
89 pinctrl-names = "default";
90
91 i2c-gpio,delay-us = <4>;
92
93 #address-cells = <1>;
94 #size-cells = <0>;
95
96 backlight@2c {
97 compatible = "ti,lp8556";
98 reg = <0x2c>;
99
100 dev-ctrl = /bits/ 8 <0x80>;
101 init-brt = /bits/ 8 <0x3f>;
102
103 pwms = <&backlight_pwm 0 100000>;
104 pwm-names = "lp8556";
105
106 rom-a0h {
107 rom-addr = /bits/ 8 <0xa0>;
108 rom-val = /bits/ 8 <0x44>;
109 };
110
111 rom-a1h {
112 rom-addr = /bits/ 8 <0xa1>;
113 rom-val = /bits/ 8 <0x6c>;
114 };
115
116 rom-a5h {
117 rom-addr = /bits/ 8 <0xa5>;
118 rom-val = /bits/ 8 <0x24>;
119 };
120 };
121 };
122
123 backlight_pwm: pwm {
124 compatible = "clk-pwm";
125 #pwm-cells = <2>;
126 clocks = <&mmcc CAMSS_GP0_CLK>;
127 pinctrl-0 = <&backlight_pwm_default_state>;
128 pinctrl-names = "default";
129 };
130
131 reg_tsp_1p8v: regulator-tsp-1p8v {
132 compatible = "regulator-fixed";
133 regulator-name = "tsp_1p8v";
134 regulator-min-microvolt = <1800000>;
135 regulator-max-microvolt = <1800000>;
136
137 gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
138 enable-active-high;
139
140 pinctrl-names = "default";
141 pinctrl-0 = <&tsp_en_default_state>;
142 };
143
144 reg_tsp_3p3v: regulator-tsp-3p3v {
145 compatible = "regulator-fixed";
146 regulator-name = "tsp_3p3v";
147 regulator-min-microvolt = <3300000>;
148 regulator-max-microvolt = <3300000>;
149
150 gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
151 enable-active-high;
152
153 pinctrl-names = "default";
154 pinctrl-0 = <&tsp_en1_default_state>;
155 };
156
157 reserved-memory {
158 #address-cells = <1>;
159 #size-cells = <1>;
160 ranges;
161
162 framebuffer@3200000 {
163 reg = <0x03200000 0x800000>;
164 no-map;
165 };
166
167 mpss@8400000 {
168 reg = <0x08400000 0x1f00000>;
169 no-map;
170 };
171
172 mba@a300000 {
173 reg = <0x0a300000 0x100000>;
174 no-map;
175 };
176
177 reserved@cb00000 {
178 reg = <0x0cb00000 0x700000>;
179 no-map;
180 };
181
182 wcnss@d200000 {
183 reg = <0x0d200000 0x700000>;
184 no-map;
185 };
186
187 adsp_region: adsp@d900000 {
188 reg = <0x0d900000 0x1800000>;
189 no-map;
190 };
191
192 venus@f100000 {
193 reg = <0x0f100000 0x500000>;
194 no-map;
195 };
196
197 smem_region: smem@fa00000 {
198 reg = <0x0fa00000 0x100000>;
199 no-map;
200 };
201
202 reserved@fb00000 {
203 reg = <0x0fb00000 0x260000>;
204 no-map;
205 };
206
207 rfsa@fd60000 {
208 reg = <0x0fd60000 0x20000>;
209 no-map;
210 };
211
212 rmtfs@fd80000 {
213 compatible = "qcom,rmtfs-mem";
214 reg = <0x0fd80000 0x180000>;
215 no-map;
216
217 qcom,client-id = <1>;
218 };
219 };
220};
221
222&adsp {
223 status = "okay";
224};
225
226&blsp1_i2c2 {
227 status = "okay";
228
229 accelerometer@1d {
230 compatible = "st,lis2hh12";
231 reg = <0x1d>;
232
233 interrupt-parent = <&tlmm>;
234 interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
235
236 pinctrl-names = "default";
237 pinctrl-0 = <&accel_int_default_state>;
238
239 st,drdy-int-pin = <1>;
240
241 vdd-supply = <&pm8226_l19>;
242 vddio-supply = <&pm8226_lvs1>;
243 };
244};
245
246&blsp1_i2c4 {
247 status = "okay";
248
249 muic: usb-switch@25 {
250 compatible = "siliconmitus,sm5502-muic";
251 reg = <0x25>;
252
253 interrupt-parent = <&tlmm>;
254 interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
255
256 pinctrl-names = "default";
257 pinctrl-0 = <&muic_int_default_state>;
258 };
259};
260
261&blsp1_i2c5 {
262 status = "okay";
263
264 touchscreen@4a {
265 compatible = "atmel,maxtouch";
266 reg = <0x4a>;
267
268 interrupt-parent = <&tlmm>;
269 interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
270
271 pinctrl-names = "default";
272 pinctrl-0 = <&tsp_int_rst_default_state>;
273
274 reset-gpios = <&pm8226_gpios 6 GPIO_ACTIVE_LOW>;
275
276 vdd-supply = <&reg_tsp_1p8v>;
277 vdda-supply = <&reg_tsp_3p3v>;
278 };
279};
280
281&rpm_requests {
282 regulators {
283 compatible = "qcom,rpm-pm8226-regulators";
284
285 pm8226_s3: s3 {
286 regulator-min-microvolt = <1200000>;
287 regulator-max-microvolt = <1300000>;
288 };
289
290 pm8226_s4: s4 {
291 regulator-min-microvolt = <1800000>;
292 regulator-max-microvolt = <1800000>;
293 };
294
295 pm8226_s5: s5 {
296 regulator-min-microvolt = <1150000>;
297 regulator-max-microvolt = <1150000>;
298 };
299
300 pm8226_l1: l1 {
301 regulator-min-microvolt = <1225000>;
302 regulator-max-microvolt = <1225000>;
303 };
304
305 pm8226_l2: l2 {
306 regulator-min-microvolt = <1200000>;
307 regulator-max-microvolt = <1200000>;
308 };
309
310 pm8226_l3: l3 {
311 regulator-min-microvolt = <750000>;
312 regulator-max-microvolt = <1337500>;
313 regulator-always-on;
314 };
315
316 pm8226_l4: l4 {
317 regulator-min-microvolt = <1200000>;
318 regulator-max-microvolt = <1200000>;
319 };
320
321 pm8226_l5: l5 {
322 regulator-min-microvolt = <1200000>;
323 regulator-max-microvolt = <1200000>;
324 };
325
326 pm8226_l6: l6 {
327 regulator-min-microvolt = <1800000>;
328 regulator-max-microvolt = <1800000>;
329 regulator-always-on;
330 };
331
332 pm8226_l7: l7 {
333 regulator-min-microvolt = <1850000>;
334 regulator-max-microvolt = <1850000>;
335 };
336
337 pm8226_l8: l8 {
338 regulator-min-microvolt = <1800000>;
339 regulator-max-microvolt = <1800000>;
340 regulator-always-on;
341 };
342
343 pm8226_l9: l9 {
344 regulator-min-microvolt = <2050000>;
345 regulator-max-microvolt = <2050000>;
346 };
347
348 pm8226_l10: l10 {
349 regulator-min-microvolt = <1800000>;
350 regulator-max-microvolt = <1800000>;
351 };
352
353 pm8226_l12: l12 {
354 regulator-min-microvolt = <1800000>;
355 regulator-max-microvolt = <1800000>;
356 };
357
358 pm8226_l14: l14 {
359 regulator-min-microvolt = <2750000>;
360 regulator-max-microvolt = <2750000>;
361 };
362
363 pm8226_l15: l15 {
364 regulator-min-microvolt = <1800000>;
365 regulator-max-microvolt = <3300000>;
366 };
367
368 pm8226_l16: l16 {
369 regulator-min-microvolt = <3000000>;
370 regulator-max-microvolt = <3350000>;
371 };
372
373 pm8226_l17: l17 {
374 regulator-min-microvolt = <2950000>;
375 regulator-max-microvolt = <2950000>;
376
377 regulator-system-load = <200000>;
378 regulator-allow-set-load;
379 regulator-always-on;
380 };
381
382 pm8226_l18: l18 {
383 regulator-min-microvolt = <2950000>;
384 regulator-max-microvolt = <2950000>;
385 };
386
387 pm8226_l19: l19 {
388 regulator-min-microvolt = <2850000>;
389 regulator-max-microvolt = <3000000>;
390 };
391
392 pm8226_l20: l20 {
393 regulator-min-microvolt = <3075000>;
394 regulator-max-microvolt = <3075000>;
395 };
396
397 pm8226_l21: l21 {
398 regulator-min-microvolt = <1800000>;
399 regulator-max-microvolt = <2950000>;
400 };
401
402 pm8226_l22: l22 {
403 regulator-min-microvolt = <1800000>;
404 regulator-max-microvolt = <3000000>;
405 };
406
407 pm8226_l23: l23 {
408 regulator-min-microvolt = <1800000>;
409 regulator-max-microvolt = <3300000>;
410 };
411
412 pm8226_l24: l24 {
413 regulator-min-microvolt = <1300000>;
414 regulator-max-microvolt = <1350000>;
415 };
416
417 pm8226_l25: l25 {
418 regulator-min-microvolt = <1775000>;
419 regulator-max-microvolt = <2125000>;
420 };
421
422 pm8226_l26: l26 {
423 regulator-min-microvolt = <1225000>;
424 regulator-max-microvolt = <1300000>;
425 };
426
427 pm8226_l27: l27 {
428 regulator-min-microvolt = <1800000>;
429 regulator-max-microvolt = <1800000>;
430 };
431
432 pm8226_l28: l28 {
433 regulator-min-microvolt = <1800000>;
434 regulator-max-microvolt = <2950000>;
435 };
436
437 pm8226_lvs1: lvs1 {};
438 };
439};
440
441&sdhc_1 {
442 vmmc-supply = <&pm8226_l17>;
443 vqmmc-supply = <&pm8226_l6>;
444
445 bus-width = <8>;
446 non-removable;
447
448 status = "okay";
449};
450
451&sdhc_2 {
452 vmmc-supply = <&pm8226_l18>;
453 vqmmc-supply = <&pm8226_l21>;
454
455 bus-width = <4>;
456 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
457
458 status = "okay";
459};
460
461&tlmm {
462 accel_int_default_state: accel-int-default-state {
463 pins = "gpio54";
464 function = "gpio";
465 drive-strength = <2>;
466 bias-disable;
467 };
468
469 backlight_i2c_default_state: backlight-i2c-default-state {
470 pins = "gpio20", "gpio21";
471 function = "gpio";
472 drive-strength = <2>;
473 bias-disable;
474 };
475
476 backlight_pwm_default_state: backlight-pwm-default-state {
477 pins = "gpio33";
478 function = "gp0_clk";
479 };
480
481 muic_int_default_state: muic-int-default-state {
482 pins = "gpio67";
483 function = "gpio";
484 drive-strength = <2>;
485 bias-disable;
486 };
487
488 tsp_en_default_state: tsp-en-default-state {
489 pins = "gpio31";
490 function = "gpio";
491 drive-strength = <2>;
492 bias-disable;
493 };
494
495 tsp_en1_default_state: tsp-en1-default-state {
496 pins = "gpio73";
497 function = "gpio";
498 drive-strength = <2>;
499 bias-disable;
500 };
501
502 tsp_int_rst_default_state: tsp-int-rst-default-state {
503 pins = "gpio17";
504 function = "gpio";
505 drive-strength = <10>;
506 bias-pull-up;
507 };
508};
509
510&usb {
511 extcon = <&muic>, <&muic>;
512 status = "okay";
513};
514
515&usb_hs_phy {
516 extcon = <&muic>;
517 v1p8-supply = <&pm8226_l10>;
518 v3p3-supply = <&pm8226_l20>;
519};