| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 2 | /* |
| 3 | * Copyright (C) 2021 BSH Hausgeraete GmbH |
| 4 | */ |
| 5 | |
| 6 | /dts-v1/; |
| 7 | |
| 8 | #include <dt-bindings/input/input.h> |
| 9 | #include "imx6ulz.dtsi" |
| 10 | |
| 11 | / { |
| 12 | model = "BSH SMM M2"; |
| 13 | compatible = "bsh,imx6ulz-bsh-smm-m2", "fsl,imx6ull", "fsl,imx6ulz"; |
| 14 | |
| 15 | chosen { |
| 16 | stdout-path = &uart4; |
| 17 | }; |
| 18 | |
| 19 | usdhc2_pwrseq: usdhc2-pwrseq { |
| 20 | compatible = "mmc-pwrseq-simple"; |
| 21 | reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; |
| 22 | }; |
| 23 | }; |
| 24 | |
| 25 | &gpmi { |
| 26 | pinctrl-names = "default"; |
| 27 | pinctrl-0 = <&pinctrl_gpmi_nand>; |
| 28 | nand-on-flash-bbt; |
| 29 | status = "okay"; |
| 30 | }; |
| 31 | |
| 32 | &snvs_poweroff { |
| 33 | status = "okay"; |
| 34 | }; |
| 35 | |
| 36 | &uart3 { |
| 37 | pinctrl-names = "default"; |
| 38 | pinctrl-0 = <&pinctrl_uart3>; |
| 39 | uart-has-rtscts; |
| 40 | status = "okay"; |
| 41 | |
| 42 | bluetooth { |
| 43 | compatible = "brcm,bcm4330-bt"; |
| 44 | max-speed = <3000000>; |
| 45 | shutdown-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; |
| 46 | device-wakeup-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; |
| 47 | host-wakeup-gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; |
| 48 | }; |
| 49 | }; |
| 50 | |
| 51 | &uart4 { |
| 52 | pinctrl-names = "default"; |
| 53 | pinctrl-0 = <&pinctrl_uart4>; |
| 54 | status = "okay"; |
| 55 | }; |
| 56 | |
| 57 | &usbotg1 { |
| 58 | dr_mode = "peripheral"; |
| 59 | srp-disable; |
| 60 | hnp-disable; |
| 61 | adp-disable; |
| 62 | status = "okay"; |
| 63 | }; |
| 64 | |
| 65 | &usbphy1 { |
| 66 | fsl,tx-d-cal = <106>; |
| 67 | }; |
| 68 | |
| 69 | &usdhc2 { |
| 70 | #address-cells = <1>; |
| 71 | #size-cells = <0>; |
| 72 | pinctrl-names = "default"; |
| 73 | pinctrl-0 = <&pinctrl_wlan>; |
| 74 | bus-width = <4>; |
| 75 | no-1-8-v; |
| 76 | non-removable; |
| 77 | cap-power-off-card; |
| 78 | keep-power-in-suspend; |
| 79 | cap-sdio-irq; |
| 80 | mmc-pwrseq = <&usdhc2_pwrseq>; |
| 81 | status = "okay"; |
| 82 | |
| 83 | brcmf: wifi@1 { |
| 84 | reg = <1>; |
| 85 | compatible = "brcm,bcm4329-fmac"; |
| 86 | interrupt-parent = <&gpio1>; |
| 87 | interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; |
| 88 | interrupt-names = "host-wake"; |
| 89 | }; |
| 90 | }; |
| 91 | |
| 92 | &wdog1 { |
| 93 | status = "okay"; |
| 94 | }; |
| 95 | |
| 96 | &iomuxc { |
| 97 | pinctrl_gpmi_nand: gpmi-nand { |
| 98 | fsl,pins = < |
| 99 | MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 |
| 100 | MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 |
| 101 | MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1 |
| 102 | MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000 |
| 103 | MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1 |
| 104 | MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1 |
| 105 | MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1 |
| 106 | MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1 |
| 107 | MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1 |
| 108 | MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1 |
| 109 | MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1 |
| 110 | MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1 |
| 111 | MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1 |
| 112 | MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 |
| 113 | MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 |
| 114 | >; |
| 115 | }; |
| 116 | |
| 117 | pinctrl_uart3: uart3grp { |
| 118 | fsl,pins = < |
| 119 | MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 |
| 120 | MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b099 |
| 121 | MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x1b0b1 |
| 122 | MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x1b099 |
| 123 | MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x79 /* BT_REG_ON */ |
| 124 | MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x100b1 /* BT_DEV_WAKE out */ |
| 125 | MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x1b0b0 /* BT_HOST_WAKE in */ |
| 126 | >; |
| 127 | }; |
| 128 | |
| 129 | pinctrl_uart4: uart4grp { |
| 130 | fsl,pins = < |
| 131 | MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x1b0b1 |
| 132 | MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x1b0b1 |
| 133 | >; |
| 134 | }; |
| 135 | |
| 136 | pinctrl_wlan: wlangrp { |
| 137 | fsl,pins = < |
| 138 | MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059 |
| 139 | MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x10059 |
| 140 | MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17059 |
| 141 | MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17059 |
| 142 | MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17059 |
| 143 | MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17059 |
| 144 | MX6UL_PAD_SD1_DATA3__GPIO2_IO21 0x79 /* WL_REG_ON */ |
| 145 | MX6UL_PAD_UART2_CTS_B__GPIO1_IO22 0x100b1 /* WL_DEV_WAKE - WiFi_GPIO_4 - WiFi FW UART */ |
| 146 | MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b1 /* WL_HOST_WAKE - WIFI_GPIO_0 - OOB IRQ */ |
| 147 | MX6UL_PAD_ENET1_RX_EN__OSC32K_32K_OUT 0x4001b031 /* OSC 32Khz wifi clk in */ |
| 148 | >; |
| 149 | }; |
| 150 | }; |