| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| 2 | /* |
| 3 | * Copyright (c) 2021 Protonic Holland |
| 4 | */ |
| 5 | |
| 6 | / { |
| 7 | gpio-keys { |
| 8 | compatible = "gpio-keys"; |
| 9 | pinctrl-names = "default"; |
| 10 | pinctrl-0 = <&pinctrl_gpiokeys>; |
| 11 | autorepeat; |
| 12 | |
| 13 | power-button { |
| 14 | label = "Power Button"; |
| 15 | gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; |
| 16 | linux,code = <KEY_POWER>; |
| 17 | wakeup-source; |
| 18 | }; |
| 19 | }; |
| 20 | |
| 21 | panel { |
| 22 | compatible = "kyo,tcg121xglp"; |
| 23 | backlight = <&backlight_lcd>; |
| 24 | power-supply = <®_3v3>; |
| 25 | |
| 26 | port { |
| 27 | panel_in: endpoint { |
| 28 | remote-endpoint = <&lvds0_out>; |
| 29 | }; |
| 30 | }; |
| 31 | }; |
| 32 | }; |
| 33 | |
| 34 | &fec { |
| 35 | pinctrl-names = "default"; |
| 36 | pinctrl-0 = <&pinctrl_enet>; |
| 37 | phy-mode = "rgmii-id"; |
| 38 | phy-handle = <&rgmii_phy>; |
| 39 | status = "okay"; |
| 40 | |
| 41 | mdio { |
| 42 | #address-cells = <1>; |
| 43 | #size-cells = <0>; |
| 44 | |
| 45 | /* Microchip KSZ9031RNX PHY */ |
| 46 | rgmii_phy: ethernet-phy@0 { |
| 47 | reg = <0>; |
| 48 | interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; |
| 49 | reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; |
| 50 | reset-assert-us = <10000>; |
| 51 | reset-deassert-us = <300>; |
| 52 | }; |
| 53 | }; |
| 54 | }; |
| 55 | |
| 56 | &gpio1 { |
| 57 | gpio-line-names = |
| 58 | "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR", |
| 59 | "CAM2_MIRROR", "", "", "SMBALERT", |
| 60 | "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", |
| 61 | "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", |
| 62 | "SD1_DATA3", "ETH_MDIO", "", |
| 63 | "", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC"; |
| 64 | }; |
| 65 | |
| 66 | &gpio4 { |
| 67 | gpio-line-names = |
| 68 | "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", |
| 69 | "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", |
| 70 | "CAN2_SR", "CAN2_TX", "CAN2_RX", |
| 71 | "", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL", |
| 72 | "HITCH_IN_OUT", |
| 73 | "LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "", |
| 74 | "ISB_LED"; |
| 75 | }; |
| 76 | |
| 77 | &gpio5 { |
| 78 | gpio-line-names = |
| 79 | "", "", "", "", "", "", "", "", |
| 80 | "", "", "", "", "", "", "", "", |
| 81 | "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", |
| 82 | "I2S_BITCLK", "I2S_DOUT", |
| 83 | "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", |
| 84 | "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; |
| 85 | }; |
| 86 | |
| 87 | &gpio6 { |
| 88 | gpio-line-names = |
| 89 | "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", |
| 90 | "ITU656_D6", "ITU656_D7", "", "", |
| 91 | "", "", "", "", "", "", "", "", |
| 92 | "", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2", |
| 93 | "RGMII_TD3", |
| 94 | "RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1", |
| 95 | "RGMII_RD2", "RGMII_RD3", "", ""; |
| 96 | }; |
| 97 | |
| 98 | &iomuxc { |
| 99 | pinctrl_enet: enetgrp { |
| 100 | fsl,pins = < |
| 101 | MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 |
| 102 | MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 |
| 103 | MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 |
| 104 | MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 |
| 105 | MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 |
| 106 | MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 |
| 107 | MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 |
| 108 | MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 |
| 109 | MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 |
| 110 | MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 |
| 111 | MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 |
| 112 | MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 |
| 113 | MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 |
| 114 | MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 |
| 115 | MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 |
| 116 | /* Phy reset */ |
| 117 | MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 |
| 118 | MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1 |
| 119 | >; |
| 120 | }; |
| 121 | |
| 122 | pinctrl_gpiokeys: gpiokeygrp { |
| 123 | fsl,pins = < |
| 124 | /* nON_SWITCH */ |
| 125 | MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0 |
| 126 | >; |
| 127 | }; |
| 128 | }; |