| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /dts-v1/; |
| 3 | |
| 4 | #include "dove.dtsi" |
| 5 | |
| 6 | / { |
| 7 | model = "Globalscale D3Plug"; |
| 8 | compatible = "globalscale,d3plug", "marvell,dove"; |
| 9 | |
| 10 | memory { |
| 11 | device_type = "memory"; |
| 12 | reg = <0x00000000 0x40000000>; |
| 13 | }; |
| 14 | |
| 15 | chosen { |
| 16 | bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait"; |
| 17 | }; |
| 18 | |
| 19 | leds { |
| 20 | compatible = "gpio-leds"; |
| 21 | pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>; |
| 22 | pinctrl-names = "default"; |
| 23 | |
| 24 | led-wlan-act { |
| 25 | label = "wlan-act"; |
| 26 | gpios = <&gpio0 0 1>; |
| 27 | }; |
| 28 | |
| 29 | led-wlan-ap { |
| 30 | label = "wlan-ap"; |
| 31 | gpios = <&gpio0 1 1>; |
| 32 | }; |
| 33 | |
| 34 | led-status { |
| 35 | label = "status"; |
| 36 | gpios = <&gpio0 2 1>; |
| 37 | }; |
| 38 | }; |
| 39 | |
| 40 | usb_power: regulator-1 { |
| 41 | compatible = "regulator-fixed"; |
| 42 | regulator-name = "USB Power"; |
| 43 | regulator-min-microvolt = <5000000>; |
| 44 | regulator-max-microvolt = <5000000>; |
| 45 | enable-active-high; |
| 46 | regulator-always-on; |
| 47 | regulator-boot-on; |
| 48 | gpio = <&gpio0 8 0>; |
| 49 | pinctrl-0 = <&pmx_gpio_8>; |
| 50 | pinctrl-names = "default"; |
| 51 | }; |
| 52 | }; |
| 53 | |
| 54 | &uart0 { status = "okay"; }; |
| 55 | &sata0 { status = "okay"; }; |
| 56 | &i2c0 { status = "okay"; }; |
| 57 | |
| 58 | /* Samsung M8G2F eMMC */ |
| 59 | &sdio0 { |
| 60 | status = "okay"; |
| 61 | non-removable; |
| 62 | bus-width = <4>; |
| 63 | }; |
| 64 | |
| 65 | /* Marvell SD8787 WLAN/BT */ |
| 66 | &sdio1 { |
| 67 | status = "okay"; |
| 68 | non-removable; |
| 69 | }; |
| 70 | |
| 71 | &spi0 { |
| 72 | status = "okay"; |
| 73 | |
| 74 | /* spi0.0: 2M Flash Macronix MX25L1605D */ |
| 75 | flash@0 { |
| 76 | compatible = "st,m25l1605d"; |
| 77 | spi-max-frequency = <86000000>; |
| 78 | reg = <0>; |
| 79 | }; |
| 80 | }; |
| 81 | |
| 82 | &pcie { |
| 83 | status = "okay"; |
| 84 | /* Fresco Logic USB3.0 xHCI controller */ |
| 85 | pcie@1 { |
| 86 | status = "okay"; |
| 87 | reset-gpios = <&gpio0 26 1>; |
| 88 | reset-delay-us = <20000>; |
| 89 | pinctrl-0 = <&pmx_camera_gpio>; |
| 90 | pinctrl-names = "default"; |
| 91 | }; |
| 92 | /* Mini-PCIe slot */ |
| 93 | pcie@2 { |
| 94 | status = "okay"; |
| 95 | reset-gpios = <&gpio0 25 1>; |
| 96 | }; |
| 97 | }; |