| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| 2 | /* |
| 3 | * Copyright 2016 Luxul Inc. |
| 4 | */ |
| 5 | |
| 6 | /dts-v1/; |
| 7 | |
| 8 | #include "bcm47094.dtsi" |
| 9 | #include "bcm5301x-nand-cs0-bch4.dtsi" |
| 10 | |
| 11 | / { |
| 12 | compatible = "luxul,xwr-3100-v1", "brcm,bcm47094", "brcm,bcm4708"; |
| 13 | model = "Luxul XWR-3100 V1"; |
| 14 | |
| 15 | chosen { |
| 16 | bootargs = "console=ttyS0,115200 earlycon"; |
| 17 | }; |
| 18 | |
| 19 | memory@0 { |
| 20 | device_type = "memory"; |
| 21 | reg = <0x00000000 0x08000000>, |
| 22 | <0x88000000 0x08000000>; |
| 23 | }; |
| 24 | |
| 25 | nvram@1eff0000 { |
| 26 | compatible = "brcm,nvram"; |
| 27 | reg = <0x1eff0000 0x10000>; |
| 28 | |
| 29 | et0macaddr: et0macaddr { |
| 30 | #nvmem-cell-cells = <1>; |
| 31 | }; |
| 32 | }; |
| 33 | |
| 34 | leds { |
| 35 | compatible = "gpio-leds"; |
| 36 | |
| 37 | led-power { |
| 38 | label = "bcm53xx:green:power"; |
| 39 | gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; |
| 40 | linux,default-trigger = "default-on"; |
| 41 | }; |
| 42 | |
| 43 | led-lan3 { |
| 44 | label = "bcm53xx:green:lan3"; |
| 45 | gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; |
| 46 | }; |
| 47 | |
| 48 | led-lan4 { |
| 49 | label = "bcm53xx:green:lan4"; |
| 50 | gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; |
| 51 | }; |
| 52 | |
| 53 | led-wan { |
| 54 | label = "bcm53xx:green:wan"; |
| 55 | gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; |
| 56 | }; |
| 57 | |
| 58 | led-lan1 { |
| 59 | label = "bcm53xx:green:lan1"; |
| 60 | gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; |
| 61 | }; |
| 62 | |
| 63 | led-lan2 { |
| 64 | label = "bcm53xx:green:lan2"; |
| 65 | gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; |
| 66 | }; |
| 67 | |
| 68 | led-usb3 { |
| 69 | label = "bcm53xx:green:usb3"; |
| 70 | gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; |
| 71 | trigger-sources = <&ohci_port1>, <&ehci_port1>, |
| 72 | <&xhci_port1>; |
| 73 | linux,default-trigger = "usbport"; |
| 74 | }; |
| 75 | |
| 76 | led-status { |
| 77 | label = "bcm53xx:green:status"; |
| 78 | gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; |
| 79 | linux,default-trigger = "timer"; |
| 80 | }; |
| 81 | |
| 82 | led-2ghz { |
| 83 | label = "bcm53xx:green:2ghz"; |
| 84 | gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; |
| 85 | }; |
| 86 | |
| 87 | led-5ghz { |
| 88 | label = "bcm53xx:green:5ghz"; |
| 89 | gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; |
| 90 | }; |
| 91 | }; |
| 92 | |
| 93 | gpio-keys { |
| 94 | compatible = "gpio-keys"; |
| 95 | |
| 96 | button-restart { |
| 97 | label = "Reset"; |
| 98 | linux,code = <KEY_RESTART>; |
| 99 | gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; |
| 100 | }; |
| 101 | }; |
| 102 | }; |
| 103 | |
| 104 | &usb3 { |
| 105 | vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; |
| 106 | }; |
| 107 | |
| 108 | &gmac0 { |
| 109 | nvmem-cells = <&et0macaddr 0>; |
| 110 | nvmem-cell-names = "mac-address"; |
| 111 | }; |
| 112 | |
| 113 | &spi_nor { |
| 114 | status = "okay"; |
| 115 | }; |
| 116 | |
| 117 | &usb3_phy { |
| 118 | status = "okay"; |
| 119 | }; |
| 120 | |
| 121 | &srab { |
| 122 | status = "okay"; |
| 123 | |
| 124 | ports { |
| 125 | port@0 { |
| 126 | label = "lan4"; |
| 127 | }; |
| 128 | |
| 129 | port@1 { |
| 130 | label = "lan3"; |
| 131 | }; |
| 132 | |
| 133 | port@2 { |
| 134 | label = "lan2"; |
| 135 | }; |
| 136 | |
| 137 | port@3 { |
| 138 | label = "lan1"; |
| 139 | }; |
| 140 | |
| 141 | port@4 { |
| 142 | label = "wan"; |
| 143 | nvmem-cells = <&et0macaddr 5>; |
| 144 | nvmem-cell-names = "mac-address"; |
| 145 | }; |
| 146 | |
| 147 | port@5 { |
| 148 | label = "cpu"; |
| 149 | }; |
| 150 | |
| 151 | port@7 { |
| 152 | status = "disabled"; |
| 153 | }; |
| 154 | |
| 155 | port@8 { |
| 156 | status = "disabled"; |
| 157 | }; |
| 158 | }; |
| 159 | }; |