Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | // Copyright 2019 IBM Corp. |
| 3 | /dts-v1/; |
| 4 | |
| 5 | #include "aspeed-g6.dtsi" |
| 6 | #include <dt-bindings/gpio/aspeed-gpio.h> |
| 7 | #include <dt-bindings/i2c/i2c.h> |
| 8 | #include <dt-bindings/leds/leds-pca955x.h> |
| 9 | |
| 10 | / { |
| 11 | model = "Rainier 2U"; |
| 12 | compatible = "ibm,rainier-bmc", "aspeed,ast2600"; |
| 13 | |
| 14 | aliases { |
| 15 | serial4 = &uart5; |
| 16 | i2c16 = &i2c2mux0; |
| 17 | i2c17 = &i2c2mux1; |
| 18 | i2c18 = &i2c2mux2; |
| 19 | i2c19 = &i2c2mux3; |
| 20 | i2c20 = &i2c4mux0chn0; |
| 21 | i2c21 = &i2c4mux0chn1; |
| 22 | i2c22 = &i2c4mux0chn2; |
| 23 | i2c23 = &i2c5mux0chn0; |
| 24 | i2c24 = &i2c5mux0chn1; |
| 25 | i2c25 = &i2c6mux0chn0; |
| 26 | i2c26 = &i2c6mux0chn1; |
| 27 | i2c27 = &i2c6mux0chn2; |
| 28 | i2c28 = &i2c6mux0chn3; |
| 29 | i2c29 = &i2c11mux0chn0; |
| 30 | i2c30 = &i2c11mux0chn1; |
| 31 | }; |
| 32 | |
| 33 | chosen { |
| 34 | stdout-path = &uart5; |
| 35 | bootargs = "console=ttyS4,115200n8 earlycon"; |
| 36 | }; |
| 37 | |
| 38 | memory@80000000 { |
| 39 | device_type = "memory"; |
| 40 | reg = <0x80000000 0x40000000>; |
| 41 | }; |
| 42 | |
| 43 | reserved-memory { |
| 44 | #address-cells = <1>; |
| 45 | #size-cells = <1>; |
| 46 | ranges; |
| 47 | |
| 48 | ramoops@b3e00000 { |
| 49 | compatible = "ramoops"; |
| 50 | reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */ |
| 51 | record-size = <0x8000>; |
| 52 | console-size = <0x8000>; |
| 53 | ftrace-size = <0x8000>; |
| 54 | pmsg-size = <0x8000>; |
| 55 | max-reason = <3>; /* KMSG_DUMP_EMERG */ |
| 56 | }; |
| 57 | |
| 58 | /* LPC FW cycle bridge region requires natural alignment */ |
| 59 | flash_memory: region@b4000000 { |
| 60 | no-map; |
| 61 | reg = <0xb4000000 0x04000000>; /* 64M */ |
| 62 | }; |
| 63 | |
| 64 | /* VGA region is dictated by hardware strapping */ |
| 65 | vga_memory: region@bf000000 { |
| 66 | no-map; |
| 67 | compatible = "shared-dma-pool"; |
| 68 | reg = <0xbf000000 0x01000000>; /* 16M */ |
| 69 | }; |
| 70 | }; |
| 71 | |
| 72 | i2c2mux: i2cmux { |
| 73 | compatible = "i2c-mux-gpio"; |
| 74 | #address-cells = <1>; |
| 75 | #size-cells = <0>; |
| 76 | status = "okay"; |
| 77 | |
| 78 | i2c-parent = <&i2c2>; |
| 79 | mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>, |
| 80 | <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>; |
| 81 | idle-state = <0>; |
| 82 | |
| 83 | i2c2mux0: i2c@0 { |
| 84 | #address-cells = <1>; |
| 85 | #size-cells = <0>; |
| 86 | reg = <0>; |
| 87 | }; |
| 88 | |
| 89 | i2c2mux1: i2c@1 { |
| 90 | #address-cells = <1>; |
| 91 | #size-cells = <0>; |
| 92 | reg = <1>; |
| 93 | }; |
| 94 | |
| 95 | i2c2mux2: i2c@2 { |
| 96 | #address-cells = <1>; |
| 97 | #size-cells = <0>; |
| 98 | reg = <2>; |
| 99 | }; |
| 100 | |
| 101 | i2c2mux3: i2c@3 { |
| 102 | #address-cells = <1>; |
| 103 | #size-cells = <0>; |
| 104 | reg = <3>; |
| 105 | }; |
| 106 | }; |
| 107 | |
| 108 | leds { |
| 109 | compatible = "gpio-leds"; |
| 110 | |
| 111 | /* BMC Card fault LED at the back */ |
| 112 | bmc-ingraham0 { |
| 113 | gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>; |
| 114 | }; |
| 115 | |
| 116 | /* Enclosure ID LED at the back */ |
| 117 | rear-enc-id0 { |
| 118 | gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>; |
| 119 | }; |
| 120 | |
| 121 | /* Enclosure fault LED at the back */ |
| 122 | rear-enc-fault0 { |
| 123 | gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; |
| 124 | }; |
| 125 | |
| 126 | /* PCIE slot power LED */ |
| 127 | pcieslot-power { |
| 128 | gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>; |
| 129 | }; |
| 130 | }; |
| 131 | |
| 132 | gpio-keys-polled { |
| 133 | compatible = "gpio-keys-polled"; |
| 134 | poll-interval = <1000>; |
| 135 | |
| 136 | event-fan0-presence { |
| 137 | label = "fan0-presence"; |
| 138 | gpios = <&pca0 6 GPIO_ACTIVE_LOW>; |
| 139 | linux,code = <6>; |
| 140 | }; |
| 141 | |
| 142 | event-fan1-presence { |
| 143 | label = "fan1-presence"; |
| 144 | gpios = <&pca0 7 GPIO_ACTIVE_LOW>; |
| 145 | linux,code = <7>; |
| 146 | }; |
| 147 | |
| 148 | event-fan2-presence { |
| 149 | label = "fan2-presence"; |
| 150 | gpios = <&pca0 8 GPIO_ACTIVE_LOW>; |
| 151 | linux,code = <8>; |
| 152 | }; |
| 153 | |
| 154 | event-fan3-presence { |
| 155 | label = "fan3-presence"; |
| 156 | gpios = <&pca0 9 GPIO_ACTIVE_LOW>; |
| 157 | linux,code = <9>; |
| 158 | }; |
| 159 | |
| 160 | event-fan4-presence { |
| 161 | label = "fan4-presence"; |
| 162 | gpios = <&pca0 10 GPIO_ACTIVE_LOW>; |
| 163 | linux,code = <10>; |
| 164 | }; |
| 165 | |
| 166 | event-fan5-presence { |
| 167 | label = "fan5-presence"; |
| 168 | gpios = <&pca0 11 GPIO_ACTIVE_LOW>; |
| 169 | linux,code = <11>; |
| 170 | }; |
| 171 | }; |
| 172 | |
| 173 | iio-hwmon { |
| 174 | compatible = "iio-hwmon"; |
| 175 | io-channels = <&adc1 7>; |
| 176 | }; |
| 177 | }; |
| 178 | |
| 179 | &adc1 { |
| 180 | status = "okay"; |
| 181 | aspeed,int-vref-microvolt = <2500000>; |
| 182 | pinctrl-names = "default"; |
| 183 | pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default |
| 184 | &pinctrl_adc10_default &pinctrl_adc11_default |
| 185 | &pinctrl_adc12_default &pinctrl_adc13_default |
| 186 | &pinctrl_adc14_default &pinctrl_adc15_default>; |
| 187 | }; |
| 188 | |
| 189 | &ehci1 { |
| 190 | status = "okay"; |
| 191 | }; |
| 192 | |
| 193 | &uhci { |
| 194 | status = "okay"; |
| 195 | }; |
| 196 | |
| 197 | &gpio0 { |
| 198 | gpio-line-names = |
| 199 | /*A0-A7*/ "","","","","","","","", |
| 200 | /*B0-B7*/ "","","","","","","checkstop","", |
| 201 | /*C0-C7*/ "","","","","","","","", |
| 202 | /*D0-D7*/ "","","","","","","","", |
| 203 | /*E0-E7*/ "","","","","","","","", |
| 204 | /*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","", |
| 205 | /*G0-G7*/ "","","","","","","","", |
| 206 | /*H0-H7*/ "","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","", |
| 207 | /*I0-I7*/ "","","","","","","bmc-secure-boot","", |
| 208 | /*J0-J7*/ "","","","","","","","", |
| 209 | /*K0-K7*/ "","","","","","","","", |
| 210 | /*L0-L7*/ "","","","","","","","", |
| 211 | /*M0-M7*/ "","","","","","","","", |
| 212 | /*N0-N7*/ "","","","","","","","", |
| 213 | /*O0-O7*/ "","","","usb-power","","","","", |
| 214 | /*P0-P7*/ "","","","","pcieslot-power","","","", |
| 215 | /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","", |
| 216 | /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","", |
| 217 | /*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3", |
| 218 | "power-ffs-sync-history","","","", |
| 219 | /*T0-T7*/ "","","","","","","","", |
| 220 | /*U0-U7*/ "","","","","","","","", |
| 221 | /*V0-V7*/ "","","","","","","","", |
| 222 | /*W0-W7*/ "","","","","","","","", |
| 223 | /*X0-X7*/ "","","","","","","","", |
| 224 | /*Y0-Y7*/ "","","","","","","","", |
| 225 | /*Z0-Z7*/ "","","","","","","",""; |
| 226 | |
| 227 | i2c3_mux_oe_n { |
| 228 | gpio-hog; |
| 229 | gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>; |
| 230 | output-high; |
| 231 | line-name = "I2C3_MUX_OE_N"; |
| 232 | }; |
| 233 | |
| 234 | usb_power { |
| 235 | gpio-hog; |
| 236 | gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>; |
| 237 | output-high; |
| 238 | }; |
| 239 | }; |
| 240 | |
| 241 | &emmc_controller { |
| 242 | status = "okay"; |
| 243 | }; |
| 244 | |
| 245 | &pinctrl_emmc_default { |
| 246 | bias-disable; |
| 247 | }; |
| 248 | |
| 249 | &emmc { |
| 250 | status = "okay"; |
| 251 | clk-phase-mmc-hs200 = <180>, <180>; |
| 252 | }; |
| 253 | |
| 254 | &ibt { |
| 255 | status = "okay"; |
| 256 | }; |
| 257 | |
| 258 | &i2c0 { |
| 259 | status = "okay"; |
| 260 | |
| 261 | eeprom@51 { |
| 262 | compatible = "atmel,24c64"; |
| 263 | reg = <0x51>; |
| 264 | }; |
| 265 | |
| 266 | tca_pres1: tca9554@20{ |
| 267 | compatible = "ti,tca9554"; |
| 268 | reg = <0x20>; |
| 269 | #address-cells = <1>; |
| 270 | #size-cells = <0>; |
| 271 | |
| 272 | gpio-controller; |
| 273 | #gpio-cells = <2>; |
| 274 | |
| 275 | gpio-line-names = "", |
| 276 | "RUSSEL_FW_I2C_ENABLE_N", |
| 277 | "RUSSEL_OPPANEL_PRESENCE_N", |
| 278 | "BLYTH_OPPANEL_PRESENCE_N", |
| 279 | "CPU_TPM_CARD_PRESENT_N", |
| 280 | "DASD_BP2_PRESENT_N", |
| 281 | "DASD_BP1_PRESENT_N", |
| 282 | "DASD_BP0_PRESENT_N"; |
| 283 | }; |
| 284 | }; |
| 285 | |
| 286 | &i2c1 { |
| 287 | status = "okay"; |
| 288 | }; |
| 289 | |
| 290 | &i2c2 { |
| 291 | status = "okay"; |
| 292 | }; |
| 293 | |
| 294 | &i2c3 { |
| 295 | status = "okay"; |
| 296 | |
| 297 | power-supply@68 { |
| 298 | compatible = "ibm,cffps"; |
| 299 | reg = <0x68>; |
| 300 | }; |
| 301 | |
| 302 | power-supply@69 { |
| 303 | compatible = "ibm,cffps"; |
| 304 | reg = <0x69>; |
| 305 | }; |
| 306 | |
| 307 | pca_pres1: pca9552@61 { |
| 308 | compatible = "nxp,pca9552"; |
| 309 | reg = <0x61>; |
| 310 | #address-cells = <1>; |
| 311 | #size-cells = <0>; |
| 312 | |
| 313 | gpio-controller; |
| 314 | #gpio-cells = <2>; |
| 315 | |
| 316 | gpio-line-names = |
| 317 | "SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD", |
| 318 | "SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD", |
| 319 | "SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N", |
| 320 | "SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N", |
| 321 | "SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N", |
| 322 | "", "", "", "", "", ""; |
| 323 | }; |
| 324 | }; |
| 325 | |
| 326 | &i2c4 { |
| 327 | status = "okay"; |
| 328 | |
| 329 | tmp275@48 { |
| 330 | compatible = "ti,tmp275"; |
| 331 | reg = <0x48>; |
| 332 | }; |
| 333 | |
| 334 | tmp275@49 { |
| 335 | compatible = "ti,tmp275"; |
| 336 | reg = <0x49>; |
| 337 | }; |
| 338 | |
| 339 | tmp275@4a { |
| 340 | compatible = "ti,tmp275"; |
| 341 | reg = <0x4a>; |
| 342 | }; |
| 343 | |
| 344 | i2c-mux@70 { |
| 345 | compatible = "nxp,pca9546"; |
| 346 | reg = <0x70>; |
| 347 | #address-cells = <1>; |
| 348 | #size-cells = <0>; |
| 349 | status = "okay"; |
| 350 | i2c-mux-idle-disconnect; |
| 351 | |
| 352 | i2c4mux0chn0: i2c@0 { |
| 353 | #address-cells = <1>; |
| 354 | #size-cells = <0>; |
| 355 | reg = <0>; |
| 356 | |
| 357 | eeprom@50 { |
| 358 | compatible = "atmel,24c64"; |
| 359 | reg = <0x50>; |
| 360 | }; |
| 361 | |
| 362 | pca9551@60 { |
| 363 | compatible = "nxp,pca9551"; |
| 364 | reg = <0x60>; |
| 365 | #address-cells = <1>; |
| 366 | #size-cells = <0>; |
| 367 | |
| 368 | gpio-controller; |
| 369 | #gpio-cells = <2>; |
| 370 | |
| 371 | led@0 { |
| 372 | label = "cablecard0-cxp-top"; |
| 373 | reg = <0>; |
| 374 | retain-state-shutdown; |
| 375 | default-state = "keep"; |
| 376 | type = <PCA955X_TYPE_LED>; |
| 377 | }; |
| 378 | |
| 379 | led@1 { |
| 380 | label = "cablecard0-cxp-bot"; |
| 381 | reg = <1>; |
| 382 | retain-state-shutdown; |
| 383 | default-state = "keep"; |
| 384 | type = <PCA955X_TYPE_LED>; |
| 385 | }; |
| 386 | }; |
| 387 | }; |
| 388 | |
| 389 | i2c4mux0chn1: i2c@1 { |
| 390 | #address-cells = <1>; |
| 391 | #size-cells = <0>; |
| 392 | reg = <1>; |
| 393 | |
| 394 | eeprom@51 { |
| 395 | compatible = "atmel,24c64"; |
| 396 | reg = <0x51>; |
| 397 | }; |
| 398 | }; |
| 399 | |
| 400 | i2c4mux0chn2: i2c@2 { |
| 401 | #address-cells = <1>; |
| 402 | #size-cells = <0>; |
| 403 | reg = <2>; |
| 404 | |
| 405 | eeprom@52 { |
| 406 | compatible = "atmel,24c64"; |
| 407 | reg = <0x52>; |
| 408 | }; |
| 409 | }; |
| 410 | }; |
| 411 | }; |
| 412 | |
| 413 | &i2c5 { |
| 414 | status = "okay"; |
| 415 | |
| 416 | tmp275@48 { |
| 417 | compatible = "ti,tmp275"; |
| 418 | reg = <0x48>; |
| 419 | }; |
| 420 | |
| 421 | tmp275@49 { |
| 422 | compatible = "ti,tmp275"; |
| 423 | reg = <0x49>; |
| 424 | }; |
| 425 | |
| 426 | i2c-mux@70 { |
| 427 | compatible = "nxp,pca9546"; |
| 428 | reg = <0x70>; |
| 429 | #address-cells = <1>; |
| 430 | #size-cells = <0>; |
| 431 | status = "okay"; |
| 432 | i2c-mux-idle-disconnect; |
| 433 | |
| 434 | i2c5mux0chn0: i2c@0 { |
| 435 | #address-cells = <1>; |
| 436 | #size-cells = <0>; |
| 437 | reg = <0>; |
| 438 | |
| 439 | eeprom@50 { |
| 440 | compatible = "atmel,24c64"; |
| 441 | reg = <0x50>; |
| 442 | }; |
| 443 | |
| 444 | pca9551@60 { |
| 445 | compatible = "nxp,pca9551"; |
| 446 | reg = <0x60>; |
| 447 | #address-cells = <1>; |
| 448 | #size-cells = <0>; |
| 449 | |
| 450 | gpio-controller; |
| 451 | #gpio-cells = <2>; |
| 452 | |
| 453 | led@0 { |
| 454 | label = "cablecard3-cxp-top"; |
| 455 | reg = <0>; |
| 456 | retain-state-shutdown; |
| 457 | default-state = "keep"; |
| 458 | type = <PCA955X_TYPE_LED>; |
| 459 | }; |
| 460 | |
| 461 | led@1 { |
| 462 | label = "cablecard3-cxp-bot"; |
| 463 | reg = <1>; |
| 464 | retain-state-shutdown; |
| 465 | default-state = "keep"; |
| 466 | type = <PCA955X_TYPE_LED>; |
| 467 | }; |
| 468 | }; |
| 469 | }; |
| 470 | |
| 471 | i2c5mux0chn1: i2c@1 { |
| 472 | #address-cells = <1>; |
| 473 | #size-cells = <0>; |
| 474 | reg = <1>; |
| 475 | |
| 476 | eeprom@51 { |
| 477 | compatible = "atmel,24c64"; |
| 478 | reg = <0x51>; |
| 479 | }; |
| 480 | |
| 481 | pca9551@61 { |
| 482 | compatible = "nxp,pca9551"; |
| 483 | reg = <0x61>; |
| 484 | #address-cells = <1>; |
| 485 | #size-cells = <0>; |
| 486 | |
| 487 | gpio-controller; |
| 488 | #gpio-cells = <2>; |
| 489 | |
| 490 | led@0 { |
| 491 | label = "cablecard4-cxp-top"; |
| 492 | reg = <0>; |
| 493 | retain-state-shutdown; |
| 494 | default-state = "keep"; |
| 495 | type = <PCA955X_TYPE_LED>; |
| 496 | }; |
| 497 | |
| 498 | led@1 { |
| 499 | label = "cablecard4-cxp-bot"; |
| 500 | reg = <1>; |
| 501 | retain-state-shutdown; |
| 502 | default-state = "keep"; |
| 503 | type = <PCA955X_TYPE_LED>; |
| 504 | }; |
| 505 | }; |
| 506 | }; |
| 507 | }; |
| 508 | }; |
| 509 | |
| 510 | &i2c6 { |
| 511 | status = "okay"; |
| 512 | |
| 513 | tmp275@48 { |
| 514 | compatible = "ti,tmp275"; |
| 515 | reg = <0x48>; |
| 516 | }; |
| 517 | |
| 518 | tmp275@4a { |
| 519 | compatible = "ti,tmp275"; |
| 520 | reg = <0x4a>; |
| 521 | }; |
| 522 | |
| 523 | tmp275@4b { |
| 524 | compatible = "ti,tmp275"; |
| 525 | reg = <0x4b>; |
| 526 | }; |
| 527 | |
| 528 | i2c-mux@70 { |
| 529 | compatible = "nxp,pca9546"; |
| 530 | reg = <0x70>; |
| 531 | #address-cells = <1>; |
| 532 | #size-cells = <0>; |
| 533 | status = "okay"; |
| 534 | i2c-mux-idle-disconnect; |
| 535 | |
| 536 | i2c6mux0chn0: i2c@0 { |
| 537 | #address-cells = <1>; |
| 538 | #size-cells = <0>; |
| 539 | reg = <0>; |
| 540 | |
| 541 | eeprom@53 { |
| 542 | compatible = "atmel,24c64"; |
| 543 | reg = <0x53>; |
| 544 | }; |
| 545 | }; |
| 546 | |
| 547 | i2c6mux0chn1: i2c@1 { |
| 548 | #address-cells = <1>; |
| 549 | #size-cells = <0>; |
| 550 | reg = <1>; |
| 551 | |
| 552 | eeprom@52 { |
| 553 | compatible = "atmel,24c64"; |
| 554 | reg = <0x52>; |
| 555 | }; |
| 556 | }; |
| 557 | |
| 558 | i2c6mux0chn2: i2c@2 { |
| 559 | #address-cells = <1>; |
| 560 | #size-cells = <0>; |
| 561 | reg = <2>; |
| 562 | |
| 563 | eeprom@50 { |
| 564 | compatible = "atmel,24c64"; |
| 565 | reg = <0x50>; |
| 566 | }; |
| 567 | }; |
| 568 | |
| 569 | i2c6mux0chn3: i2c@3 { |
| 570 | #address-cells = <1>; |
| 571 | #size-cells = <0>; |
| 572 | reg = <3>; |
| 573 | |
| 574 | eeprom@51 { |
| 575 | compatible = "atmel,24c64"; |
| 576 | reg = <0x51>; |
| 577 | }; |
| 578 | }; |
| 579 | }; |
| 580 | }; |
| 581 | |
| 582 | &i2c7 { |
| 583 | multi-master; |
| 584 | status = "okay"; |
| 585 | |
| 586 | pca9552@30 { |
| 587 | compatible = "ibm,pca9552"; |
| 588 | reg = <0x30>; |
| 589 | #address-cells = <1>; |
| 590 | #size-cells = <0>; |
| 591 | |
| 592 | gpio-controller; |
| 593 | #gpio-cells = <2>; |
| 594 | |
| 595 | led@0 { |
| 596 | label = "pcieslot0"; |
| 597 | reg = <0>; |
| 598 | retain-state-shutdown; |
| 599 | default-state = "keep"; |
| 600 | type = <PCA955X_TYPE_LED>; |
| 601 | }; |
| 602 | |
| 603 | led@1 { |
| 604 | label = "pcieslot1"; |
| 605 | reg = <1>; |
| 606 | retain-state-shutdown; |
| 607 | default-state = "keep"; |
| 608 | type = <PCA955X_TYPE_LED>; |
| 609 | }; |
| 610 | |
| 611 | led@2 { |
| 612 | label = "pcieslot2"; |
| 613 | reg = <2>; |
| 614 | retain-state-shutdown; |
| 615 | default-state = "keep"; |
| 616 | type = <PCA955X_TYPE_LED>; |
| 617 | }; |
| 618 | |
| 619 | led@3 { |
| 620 | label = "pcieslot3"; |
| 621 | reg = <3>; |
| 622 | retain-state-shutdown; |
| 623 | default-state = "keep"; |
| 624 | type = <PCA955X_TYPE_LED>; |
| 625 | }; |
| 626 | |
| 627 | led@4 { |
| 628 | label = "pcieslot4"; |
| 629 | reg = <4>; |
| 630 | retain-state-shutdown; |
| 631 | default-state = "keep"; |
| 632 | type = <PCA955X_TYPE_LED>; |
| 633 | }; |
| 634 | |
| 635 | led@5 { |
| 636 | label = "cpu1"; |
| 637 | reg = <5>; |
| 638 | retain-state-shutdown; |
| 639 | default-state = "keep"; |
| 640 | type = <PCA955X_TYPE_LED>; |
| 641 | }; |
| 642 | |
| 643 | led@6 { |
| 644 | label = "cpu-vrm1"; |
| 645 | reg = <6>; |
| 646 | retain-state-shutdown; |
| 647 | default-state = "keep"; |
| 648 | type = <PCA955X_TYPE_LED>; |
| 649 | }; |
| 650 | |
| 651 | led@8 { |
| 652 | label = "lcd-russel"; |
| 653 | reg = <8>; |
| 654 | retain-state-shutdown; |
| 655 | default-state = "keep"; |
| 656 | type = <PCA955X_TYPE_LED>; |
| 657 | }; |
| 658 | }; |
| 659 | |
| 660 | pca9552@31 { |
| 661 | compatible = "ibm,pca9552"; |
| 662 | reg = <0x31>; |
| 663 | #address-cells = <1>; |
| 664 | #size-cells = <0>; |
| 665 | |
| 666 | gpio-controller; |
| 667 | #gpio-cells = <2>; |
| 668 | |
| 669 | led@0 { |
| 670 | label = "ddimm0"; |
| 671 | reg = <0>; |
| 672 | retain-state-shutdown; |
| 673 | default-state = "keep"; |
| 674 | type = <PCA955X_TYPE_LED>; |
| 675 | }; |
| 676 | |
| 677 | led@1 { |
| 678 | label = "ddimm1"; |
| 679 | reg = <1>; |
| 680 | retain-state-shutdown; |
| 681 | default-state = "keep"; |
| 682 | type = <PCA955X_TYPE_LED>; |
| 683 | }; |
| 684 | |
| 685 | led@2 { |
| 686 | label = "ddimm2"; |
| 687 | reg = <2>; |
| 688 | retain-state-shutdown; |
| 689 | default-state = "keep"; |
| 690 | type = <PCA955X_TYPE_LED>; |
| 691 | }; |
| 692 | |
| 693 | led@3 { |
| 694 | label = "ddimm3"; |
| 695 | reg = <3>; |
| 696 | retain-state-shutdown; |
| 697 | default-state = "keep"; |
| 698 | type = <PCA955X_TYPE_LED>; |
| 699 | }; |
| 700 | |
| 701 | led@4 { |
| 702 | label = "ddimm4"; |
| 703 | reg = <4>; |
| 704 | retain-state-shutdown; |
| 705 | default-state = "keep"; |
| 706 | type = <PCA955X_TYPE_LED>; |
| 707 | }; |
| 708 | |
| 709 | led@5 { |
| 710 | label = "ddimm5"; |
| 711 | reg = <5>; |
| 712 | retain-state-shutdown; |
| 713 | default-state = "keep"; |
| 714 | type = <PCA955X_TYPE_LED>; |
| 715 | }; |
| 716 | |
| 717 | led@6 { |
| 718 | label = "ddimm6"; |
| 719 | reg = <6>; |
| 720 | retain-state-shutdown; |
| 721 | default-state = "keep"; |
| 722 | type = <PCA955X_TYPE_LED>; |
| 723 | }; |
| 724 | |
| 725 | led@7 { |
| 726 | label = "ddimm7"; |
| 727 | reg = <7>; |
| 728 | retain-state-shutdown; |
| 729 | default-state = "keep"; |
| 730 | type = <PCA955X_TYPE_LED>; |
| 731 | }; |
| 732 | |
| 733 | led@8 { |
| 734 | label = "ddimm8"; |
| 735 | reg = <8>; |
| 736 | retain-state-shutdown; |
| 737 | default-state = "keep"; |
| 738 | type = <PCA955X_TYPE_LED>; |
| 739 | }; |
| 740 | |
| 741 | led@9 { |
| 742 | label = "ddimm9"; |
| 743 | reg = <9>; |
| 744 | retain-state-shutdown; |
| 745 | default-state = "keep"; |
| 746 | type = <PCA955X_TYPE_LED>; |
| 747 | }; |
| 748 | |
| 749 | led@10 { |
| 750 | label = "ddimm10"; |
| 751 | reg = <10>; |
| 752 | retain-state-shutdown; |
| 753 | default-state = "keep"; |
| 754 | type = <PCA955X_TYPE_LED>; |
| 755 | }; |
| 756 | |
| 757 | led@11 { |
| 758 | label = "ddimm11"; |
| 759 | reg = <11>; |
| 760 | retain-state-shutdown; |
| 761 | default-state = "keep"; |
| 762 | type = <PCA955X_TYPE_LED>; |
| 763 | }; |
| 764 | |
| 765 | led@12 { |
| 766 | label = "ddimm12"; |
| 767 | reg = <12>; |
| 768 | retain-state-shutdown; |
| 769 | default-state = "keep"; |
| 770 | type = <PCA955X_TYPE_LED>; |
| 771 | }; |
| 772 | |
| 773 | led@13 { |
| 774 | label = "ddimm13"; |
| 775 | reg = <13>; |
| 776 | retain-state-shutdown; |
| 777 | default-state = "keep"; |
| 778 | type = <PCA955X_TYPE_LED>; |
| 779 | }; |
| 780 | |
| 781 | led@14 { |
| 782 | label = "ddimm14"; |
| 783 | reg = <14>; |
| 784 | retain-state-shutdown; |
| 785 | default-state = "keep"; |
| 786 | type = <PCA955X_TYPE_LED>; |
| 787 | }; |
| 788 | |
| 789 | led@15 { |
| 790 | label = "ddimm15"; |
| 791 | reg = <15>; |
| 792 | retain-state-shutdown; |
| 793 | default-state = "keep"; |
| 794 | type = <PCA955X_TYPE_LED>; |
| 795 | }; |
| 796 | }; |
| 797 | |
| 798 | pca9552@32 { |
| 799 | compatible = "ibm,pca9552"; |
| 800 | reg = <0x32>; |
| 801 | #address-cells = <1>; |
| 802 | #size-cells = <0>; |
| 803 | |
| 804 | gpio-controller; |
| 805 | #gpio-cells = <2>; |
| 806 | |
| 807 | led@0 { |
| 808 | label = "ddimm16"; |
| 809 | reg = <0>; |
| 810 | retain-state-shutdown; |
| 811 | default-state = "keep"; |
| 812 | type = <PCA955X_TYPE_LED>; |
| 813 | }; |
| 814 | |
| 815 | led@1 { |
| 816 | label = "ddimm17"; |
| 817 | reg = <1>; |
| 818 | retain-state-shutdown; |
| 819 | default-state = "keep"; |
| 820 | type = <PCA955X_TYPE_LED>; |
| 821 | }; |
| 822 | |
| 823 | led@2 { |
| 824 | label = "ddimm18"; |
| 825 | reg = <2>; |
| 826 | retain-state-shutdown; |
| 827 | default-state = "keep"; |
| 828 | type = <PCA955X_TYPE_LED>; |
| 829 | }; |
| 830 | |
| 831 | led@3 { |
| 832 | label = "ddimm19"; |
| 833 | reg = <3>; |
| 834 | retain-state-shutdown; |
| 835 | default-state = "keep"; |
| 836 | type = <PCA955X_TYPE_LED>; |
| 837 | }; |
| 838 | |
| 839 | led@4 { |
| 840 | label = "ddimm20"; |
| 841 | reg = <4>; |
| 842 | retain-state-shutdown; |
| 843 | default-state = "keep"; |
| 844 | type = <PCA955X_TYPE_LED>; |
| 845 | }; |
| 846 | |
| 847 | led@5 { |
| 848 | label = "ddimm21"; |
| 849 | reg = <5>; |
| 850 | retain-state-shutdown; |
| 851 | default-state = "keep"; |
| 852 | type = <PCA955X_TYPE_LED>; |
| 853 | }; |
| 854 | |
| 855 | led@6 { |
| 856 | label = "ddimm22"; |
| 857 | reg = <6>; |
| 858 | retain-state-shutdown; |
| 859 | default-state = "keep"; |
| 860 | type = <PCA955X_TYPE_LED>; |
| 861 | }; |
| 862 | |
| 863 | led@7 { |
| 864 | label = "ddimm23"; |
| 865 | reg = <7>; |
| 866 | retain-state-shutdown; |
| 867 | default-state = "keep"; |
| 868 | type = <PCA955X_TYPE_LED>; |
| 869 | }; |
| 870 | |
| 871 | led@8 { |
| 872 | label = "ddimm24"; |
| 873 | reg = <8>; |
| 874 | retain-state-shutdown; |
| 875 | default-state = "keep"; |
| 876 | type = <PCA955X_TYPE_LED>; |
| 877 | }; |
| 878 | |
| 879 | led@9 { |
| 880 | label = "ddimm25"; |
| 881 | reg = <9>; |
| 882 | retain-state-shutdown; |
| 883 | default-state = "keep"; |
| 884 | type = <PCA955X_TYPE_LED>; |
| 885 | }; |
| 886 | |
| 887 | led@10 { |
| 888 | label = "ddimm26"; |
| 889 | reg = <10>; |
| 890 | retain-state-shutdown; |
| 891 | default-state = "keep"; |
| 892 | type = <PCA955X_TYPE_LED>; |
| 893 | }; |
| 894 | |
| 895 | led@11 { |
| 896 | label = "ddimm27"; |
| 897 | reg = <11>; |
| 898 | retain-state-shutdown; |
| 899 | default-state = "keep"; |
| 900 | type = <PCA955X_TYPE_LED>; |
| 901 | }; |
| 902 | |
| 903 | led@12 { |
| 904 | label = "ddimm28"; |
| 905 | reg = <12>; |
| 906 | retain-state-shutdown; |
| 907 | default-state = "keep"; |
| 908 | type = <PCA955X_TYPE_LED>; |
| 909 | }; |
| 910 | |
| 911 | led@13 { |
| 912 | label = "ddimm29"; |
| 913 | reg = <13>; |
| 914 | retain-state-shutdown; |
| 915 | default-state = "keep"; |
| 916 | type = <PCA955X_TYPE_LED>; |
| 917 | }; |
| 918 | |
| 919 | led@14 { |
| 920 | label = "ddimm30"; |
| 921 | reg = <14>; |
| 922 | retain-state-shutdown; |
| 923 | default-state = "keep"; |
| 924 | type = <PCA955X_TYPE_LED>; |
| 925 | }; |
| 926 | |
| 927 | led@15 { |
| 928 | label = "ddimm31"; |
| 929 | reg = <15>; |
| 930 | retain-state-shutdown; |
| 931 | default-state = "keep"; |
| 932 | type = <PCA955X_TYPE_LED>; |
| 933 | }; |
| 934 | }; |
| 935 | |
| 936 | pca9552@33 { |
| 937 | compatible = "ibm,pca9552"; |
| 938 | reg = <0x33>; |
| 939 | #address-cells = <1>; |
| 940 | #size-cells = <0>; |
| 941 | |
| 942 | gpio-controller; |
| 943 | #gpio-cells = <2>; |
| 944 | |
| 945 | led@0 { |
| 946 | label = "planar"; |
| 947 | reg = <0>; |
| 948 | retain-state-shutdown; |
| 949 | default-state = "keep"; |
| 950 | type = <PCA955X_TYPE_LED>; |
| 951 | }; |
| 952 | |
| 953 | led@1 { |
| 954 | label = "cpu0"; |
| 955 | reg = <1>; |
| 956 | retain-state-shutdown; |
| 957 | default-state = "keep"; |
| 958 | type = <PCA955X_TYPE_LED>; |
| 959 | }; |
| 960 | |
| 961 | led@3 { |
| 962 | label = "dasd-pyramid0"; |
| 963 | reg = <3>; |
| 964 | retain-state-shutdown; |
| 965 | default-state = "keep"; |
| 966 | type = <PCA955X_TYPE_LED>; |
| 967 | }; |
| 968 | |
| 969 | led@4 { |
| 970 | label = "dasd-pyramid1"; |
| 971 | reg = <4>; |
| 972 | retain-state-shutdown; |
| 973 | default-state = "keep"; |
| 974 | type = <PCA955X_TYPE_LED>; |
| 975 | }; |
| 976 | |
| 977 | led@5 { |
| 978 | label = "dasd-pyramid2"; |
| 979 | reg = <5>; |
| 980 | retain-state-shutdown; |
| 981 | default-state = "keep"; |
| 982 | type = <PCA955X_TYPE_LED>; |
| 983 | }; |
| 984 | |
| 985 | led@6 { |
| 986 | label = "cpu0-vrm0"; |
| 987 | reg = <6>; |
| 988 | retain-state-shutdown; |
| 989 | default-state = "keep"; |
| 990 | type = <PCA955X_TYPE_LED>; |
| 991 | }; |
| 992 | |
| 993 | led@7 { |
| 994 | label = "rtc-battery"; |
| 995 | reg = <7>; |
| 996 | retain-state-shutdown; |
| 997 | default-state = "keep"; |
| 998 | type = <PCA955X_TYPE_LED>; |
| 999 | }; |
| 1000 | |
| 1001 | led@8 { |
| 1002 | label = "base-blyth"; |
| 1003 | reg = <8>; |
| 1004 | retain-state-shutdown; |
| 1005 | default-state = "keep"; |
| 1006 | type = <PCA955X_TYPE_LED>; |
| 1007 | }; |
| 1008 | |
| 1009 | led@9 { |
| 1010 | label = "pcieslot6"; |
| 1011 | reg = <9>; |
| 1012 | retain-state-shutdown; |
| 1013 | default-state = "keep"; |
| 1014 | type = <PCA955X_TYPE_LED>; |
| 1015 | }; |
| 1016 | |
| 1017 | led@10 { |
| 1018 | label = "pcieslot7"; |
| 1019 | reg = <10>; |
| 1020 | retain-state-shutdown; |
| 1021 | default-state = "keep"; |
| 1022 | type = <PCA955X_TYPE_LED>; |
| 1023 | }; |
| 1024 | |
| 1025 | led@11 { |
| 1026 | label = "pcieslot8"; |
| 1027 | reg = <11>; |
| 1028 | retain-state-shutdown; |
| 1029 | default-state = "keep"; |
| 1030 | type = <PCA955X_TYPE_LED>; |
| 1031 | }; |
| 1032 | |
| 1033 | led@12 { |
| 1034 | label = "pcieslot9"; |
| 1035 | reg = <12>; |
| 1036 | retain-state-shutdown; |
| 1037 | default-state = "keep"; |
| 1038 | type = <PCA955X_TYPE_LED>; |
| 1039 | }; |
| 1040 | |
| 1041 | led@13 { |
| 1042 | label = "pcieslot10"; |
| 1043 | reg = <13>; |
| 1044 | retain-state-shutdown; |
| 1045 | default-state = "keep"; |
| 1046 | type = <PCA955X_TYPE_LED>; |
| 1047 | }; |
| 1048 | |
| 1049 | led@14 { |
| 1050 | label = "pcieslot11"; |
| 1051 | reg = <14>; |
| 1052 | retain-state-shutdown; |
| 1053 | default-state = "keep"; |
| 1054 | type = <PCA955X_TYPE_LED>; |
| 1055 | }; |
| 1056 | |
| 1057 | led@15 { |
| 1058 | label = "tpm-wilson"; |
| 1059 | reg = <15>; |
| 1060 | retain-state-shutdown; |
| 1061 | default-state = "keep"; |
| 1062 | type = <PCA955X_TYPE_LED>; |
| 1063 | }; |
| 1064 | }; |
| 1065 | |
| 1066 | si7021-a20@40 { |
| 1067 | compatible = "silabs,si7020"; |
| 1068 | reg = <0x40>; |
| 1069 | }; |
| 1070 | |
| 1071 | tmp275@48 { |
| 1072 | compatible = "ti,tmp275"; |
| 1073 | reg = <0x48>; |
| 1074 | }; |
| 1075 | |
| 1076 | max: max31785@52 { |
| 1077 | compatible = "maxim,max31785a"; |
| 1078 | reg = <0x52>; |
| 1079 | #address-cells = <1>; |
| 1080 | #size-cells = <0>; |
| 1081 | |
| 1082 | fan0: fan@0 { |
| 1083 | compatible = "pmbus-fan"; |
| 1084 | reg = <0>; |
| 1085 | tach-pulses = <2>; |
| 1086 | }; |
| 1087 | |
| 1088 | fan1: fan@1 { |
| 1089 | compatible = "pmbus-fan"; |
| 1090 | reg = <1>; |
| 1091 | tach-pulses = <2>; |
| 1092 | }; |
| 1093 | |
| 1094 | fan2: fan@2 { |
| 1095 | compatible = "pmbus-fan"; |
| 1096 | reg = <2>; |
| 1097 | tach-pulses = <2>; |
| 1098 | }; |
| 1099 | |
| 1100 | fan3: fan@3 { |
| 1101 | compatible = "pmbus-fan"; |
| 1102 | reg = <3>; |
| 1103 | tach-pulses = <2>; |
| 1104 | }; |
| 1105 | |
| 1106 | fan4: fan@4 { |
| 1107 | compatible = "pmbus-fan"; |
| 1108 | reg = <4>; |
| 1109 | tach-pulses = <2>; |
| 1110 | }; |
| 1111 | |
| 1112 | fan5: fan@5 { |
| 1113 | compatible = "pmbus-fan"; |
| 1114 | reg = <5>; |
| 1115 | tach-pulses = <2>; |
| 1116 | }; |
| 1117 | }; |
| 1118 | |
| 1119 | pca9551@60 { |
| 1120 | compatible = "nxp,pca9551"; |
| 1121 | reg = <0x60>; |
| 1122 | #address-cells = <1>; |
| 1123 | #size-cells = <0>; |
| 1124 | |
| 1125 | gpio-controller; |
| 1126 | #gpio-cells = <2>; |
| 1127 | |
| 1128 | led@0 { |
| 1129 | label = "front-sys-id0"; |
| 1130 | reg = <0>; |
| 1131 | retain-state-shutdown; |
| 1132 | default-state = "keep"; |
| 1133 | type = <PCA955X_TYPE_LED>; |
| 1134 | }; |
| 1135 | |
| 1136 | led@1 { |
| 1137 | label = "front-check-log0"; |
| 1138 | reg = <1>; |
| 1139 | retain-state-shutdown; |
| 1140 | default-state = "keep"; |
| 1141 | type = <PCA955X_TYPE_LED>; |
| 1142 | }; |
| 1143 | |
| 1144 | led@2 { |
| 1145 | label = "front-enc-fault1"; |
| 1146 | reg = <2>; |
| 1147 | retain-state-shutdown; |
| 1148 | default-state = "keep"; |
| 1149 | type = <PCA955X_TYPE_LED>; |
| 1150 | }; |
| 1151 | |
| 1152 | led@3 { |
| 1153 | label = "front-sys-pwron0"; |
| 1154 | reg = <3>; |
| 1155 | retain-state-shutdown; |
| 1156 | default-state = "keep"; |
| 1157 | type = <PCA955X_TYPE_LED>; |
| 1158 | }; |
| 1159 | }; |
| 1160 | |
| 1161 | pca0: pca9552@61 { |
| 1162 | compatible = "nxp,pca9552"; |
| 1163 | reg = <0x61>; |
| 1164 | #address-cells = <1>; |
| 1165 | #size-cells = <0>; |
| 1166 | |
| 1167 | gpio-controller; |
| 1168 | #gpio-cells = <2>; |
| 1169 | |
| 1170 | led@0 { |
| 1171 | label = "fan0"; |
| 1172 | reg = <0>; |
| 1173 | retain-state-shutdown; |
| 1174 | default-state = "keep"; |
| 1175 | type = <PCA955X_TYPE_LED>; |
| 1176 | }; |
| 1177 | |
| 1178 | led@1 { |
| 1179 | label = "fan1"; |
| 1180 | reg = <1>; |
| 1181 | retain-state-shutdown; |
| 1182 | default-state = "keep"; |
| 1183 | type = <PCA955X_TYPE_LED>; |
| 1184 | }; |
| 1185 | |
| 1186 | led@2 { |
| 1187 | label = "fan2"; |
| 1188 | reg = <2>; |
| 1189 | retain-state-shutdown; |
| 1190 | default-state = "keep"; |
| 1191 | type = <PCA955X_TYPE_LED>; |
| 1192 | }; |
| 1193 | |
| 1194 | led@3 { |
| 1195 | label = "fan3"; |
| 1196 | reg = <3>; |
| 1197 | retain-state-shutdown; |
| 1198 | default-state = "keep"; |
| 1199 | type = <PCA955X_TYPE_LED>; |
| 1200 | }; |
| 1201 | |
| 1202 | led@4 { |
| 1203 | label = "fan4"; |
| 1204 | reg = <4>; |
| 1205 | retain-state-shutdown; |
| 1206 | default-state = "keep"; |
| 1207 | type = <PCA955X_TYPE_LED>; |
| 1208 | }; |
| 1209 | |
| 1210 | led@5 { |
| 1211 | label = "fan5"; |
| 1212 | reg = <5>; |
| 1213 | retain-state-shutdown; |
| 1214 | default-state = "keep"; |
| 1215 | type = <PCA955X_TYPE_LED>; |
| 1216 | }; |
| 1217 | }; |
| 1218 | |
| 1219 | ibm-panel@62 { |
| 1220 | compatible = "ibm,op-panel"; |
| 1221 | reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>; |
| 1222 | }; |
| 1223 | |
| 1224 | dps: dps310@76 { |
| 1225 | compatible = "infineon,dps310"; |
| 1226 | reg = <0x76>; |
| 1227 | #io-channel-cells = <0>; |
| 1228 | }; |
| 1229 | |
| 1230 | eeprom@50 { |
| 1231 | compatible = "atmel,24c64"; |
| 1232 | reg = <0x50>; |
| 1233 | }; |
| 1234 | |
| 1235 | eeprom@51 { |
| 1236 | compatible = "atmel,24c64"; |
| 1237 | reg = <0x51>; |
| 1238 | }; |
| 1239 | }; |
| 1240 | |
| 1241 | &i2c8 { |
| 1242 | status = "okay"; |
| 1243 | |
| 1244 | ucd90320@11 { |
| 1245 | compatible = "ti,ucd90320"; |
| 1246 | reg = <0x11>; |
| 1247 | }; |
| 1248 | |
| 1249 | rtc@32 { |
| 1250 | compatible = "epson,rx8900"; |
| 1251 | reg = <0x32>; |
| 1252 | }; |
| 1253 | |
| 1254 | tmp275@48 { |
| 1255 | compatible = "ti,tmp275"; |
| 1256 | reg = <0x48>; |
| 1257 | }; |
| 1258 | |
| 1259 | tmp275@4a { |
| 1260 | compatible = "ti,tmp275"; |
| 1261 | reg = <0x4a>; |
| 1262 | }; |
| 1263 | |
| 1264 | eeprom@50 { |
| 1265 | compatible = "atmel,24c64"; |
| 1266 | reg = <0x50>; |
| 1267 | }; |
| 1268 | |
| 1269 | eeprom@51 { |
| 1270 | compatible = "atmel,24c64"; |
| 1271 | reg = <0x51>; |
| 1272 | }; |
| 1273 | |
| 1274 | pca_pres3: pca9552@60 { |
| 1275 | compatible = "nxp,pca9552"; |
| 1276 | reg = <0x60>; |
| 1277 | #address-cells = <1>; |
| 1278 | #size-cells = <0>; |
| 1279 | gpio-controller; |
| 1280 | #gpio-cells = <2>; |
| 1281 | |
| 1282 | gpio-line-names = |
| 1283 | "", "", "", "", "", "", "", "", |
| 1284 | "", "", "", "", "", "", "power-config-full-load", ""; |
| 1285 | }; |
| 1286 | |
| 1287 | pca_pres2: pca9552@61 { |
| 1288 | compatible = "nxp,pca9552"; |
| 1289 | reg = <0x61>; |
| 1290 | #address-cells = <1>; |
| 1291 | #size-cells = <0>; |
| 1292 | gpio-controller; |
| 1293 | #gpio-cells = <2>; |
| 1294 | |
| 1295 | gpio-line-names = |
| 1296 | "SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD", |
| 1297 | "SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD", |
| 1298 | "SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD", |
| 1299 | "SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N", |
| 1300 | "SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N", |
| 1301 | "SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N", |
| 1302 | "", "", "", ""; |
| 1303 | }; |
| 1304 | |
| 1305 | }; |
| 1306 | |
| 1307 | &i2c9 { |
| 1308 | status = "okay"; |
| 1309 | |
| 1310 | tmp423a@4c { |
| 1311 | compatible = "ti,tmp423"; |
| 1312 | reg = <0x4c>; |
| 1313 | }; |
| 1314 | |
| 1315 | tmp423b@4d { |
| 1316 | compatible = "ti,tmp423"; |
| 1317 | reg = <0x4d>; |
| 1318 | }; |
| 1319 | |
| 1320 | eeprom@50 { |
| 1321 | compatible = "atmel,24c128"; |
| 1322 | reg = <0x50>; |
| 1323 | }; |
| 1324 | }; |
| 1325 | |
| 1326 | &i2c10 { |
| 1327 | status = "okay"; |
| 1328 | |
| 1329 | tmp423a@4c { |
| 1330 | compatible = "ti,tmp423"; |
| 1331 | reg = <0x4c>; |
| 1332 | }; |
| 1333 | |
| 1334 | tmp423b@4d { |
| 1335 | compatible = "ti,tmp423"; |
| 1336 | reg = <0x4d>; |
| 1337 | }; |
| 1338 | |
| 1339 | eeprom@50 { |
| 1340 | compatible = "atmel,24c128"; |
| 1341 | reg = <0x50>; |
| 1342 | }; |
| 1343 | }; |
| 1344 | |
| 1345 | &i2c11 { |
| 1346 | status = "okay"; |
| 1347 | |
| 1348 | tmp275@48 { |
| 1349 | compatible = "ti,tmp275"; |
| 1350 | reg = <0x48>; |
| 1351 | }; |
| 1352 | |
| 1353 | tmp275@49 { |
| 1354 | compatible = "ti,tmp275"; |
| 1355 | reg = <0x49>; |
| 1356 | }; |
| 1357 | |
| 1358 | i2c-mux@70 { |
| 1359 | compatible = "nxp,pca9546"; |
| 1360 | reg = <0x70>; |
| 1361 | #address-cells = <1>; |
| 1362 | #size-cells = <0>; |
| 1363 | status = "okay"; |
| 1364 | i2c-mux-idle-disconnect; |
| 1365 | |
| 1366 | i2c11mux0chn0: i2c@0 { |
| 1367 | #address-cells = <1>; |
| 1368 | #size-cells = <0>; |
| 1369 | reg = <0>; |
| 1370 | |
| 1371 | eeprom@50 { |
| 1372 | compatible = "atmel,24c64"; |
| 1373 | reg = <0x50>; |
| 1374 | }; |
| 1375 | |
| 1376 | pca9551@60 { |
| 1377 | compatible = "nxp,pca9551"; |
| 1378 | reg = <0x60>; |
| 1379 | #address-cells = <1>; |
| 1380 | #size-cells = <0>; |
| 1381 | |
| 1382 | gpio-controller; |
| 1383 | #gpio-cells = <2>; |
| 1384 | |
| 1385 | led@0 { |
| 1386 | label = "cablecard10-cxp-top"; |
| 1387 | reg = <0>; |
| 1388 | retain-state-shutdown; |
| 1389 | default-state = "keep"; |
| 1390 | type = <PCA955X_TYPE_LED>; |
| 1391 | }; |
| 1392 | |
| 1393 | led@1 { |
| 1394 | label = "cablecard10-cxp-bot"; |
| 1395 | reg = <1>; |
| 1396 | retain-state-shutdown; |
| 1397 | default-state = "keep"; |
| 1398 | type = <PCA955X_TYPE_LED>; |
| 1399 | }; |
| 1400 | }; |
| 1401 | }; |
| 1402 | |
| 1403 | i2c11mux0chn1: i2c@1 { |
| 1404 | #address-cells = <1>; |
| 1405 | #size-cells = <0>; |
| 1406 | reg = <1>; |
| 1407 | |
| 1408 | eeprom@51 { |
| 1409 | compatible = "atmel,24c64"; |
| 1410 | reg = <0x51>; |
| 1411 | }; |
| 1412 | }; |
| 1413 | }; |
| 1414 | }; |
| 1415 | |
| 1416 | &i2c12 { |
| 1417 | status = "okay"; |
| 1418 | |
| 1419 | eeprom@50 { |
| 1420 | compatible = "atmel,24c64"; |
| 1421 | reg = <0x50>; |
| 1422 | }; |
| 1423 | }; |
| 1424 | |
| 1425 | &i2c13 { |
| 1426 | status = "okay"; |
| 1427 | |
| 1428 | eeprom@50 { |
| 1429 | compatible = "atmel,24c64"; |
| 1430 | reg = <0x50>; |
| 1431 | }; |
| 1432 | |
| 1433 | pca9552@60 { |
| 1434 | compatible = "nxp,pca9552"; |
| 1435 | reg = <0x60>; |
| 1436 | #address-cells = <1>; |
| 1437 | #size-cells = <0>; |
| 1438 | |
| 1439 | gpio-controller; |
| 1440 | #gpio-cells = <2>; |
| 1441 | |
| 1442 | led@0 { |
| 1443 | label = "nvme0"; |
| 1444 | reg = <0>; |
| 1445 | retain-state-shutdown; |
| 1446 | default-state = "keep"; |
| 1447 | type = <PCA955X_TYPE_LED>; |
| 1448 | }; |
| 1449 | |
| 1450 | led@1 { |
| 1451 | label = "nvme1"; |
| 1452 | reg = <1>; |
| 1453 | retain-state-shutdown; |
| 1454 | default-state = "keep"; |
| 1455 | type = <PCA955X_TYPE_LED>; |
| 1456 | }; |
| 1457 | |
| 1458 | led@2 { |
| 1459 | label = "nvme2"; |
| 1460 | reg = <2>; |
| 1461 | retain-state-shutdown; |
| 1462 | default-state = "keep"; |
| 1463 | type = <PCA955X_TYPE_LED>; |
| 1464 | }; |
| 1465 | |
| 1466 | led@3 { |
| 1467 | label = "nvme3"; |
| 1468 | reg = <3>; |
| 1469 | retain-state-shutdown; |
| 1470 | default-state = "keep"; |
| 1471 | type = <PCA955X_TYPE_LED>; |
| 1472 | }; |
| 1473 | |
| 1474 | led@4 { |
| 1475 | label = "nvme4"; |
| 1476 | reg = <4>; |
| 1477 | retain-state-shutdown; |
| 1478 | default-state = "keep"; |
| 1479 | type = <PCA955X_TYPE_LED>; |
| 1480 | }; |
| 1481 | |
| 1482 | led@5 { |
| 1483 | label = "nvme5"; |
| 1484 | reg = <5>; |
| 1485 | retain-state-shutdown; |
| 1486 | default-state = "keep"; |
| 1487 | type = <PCA955X_TYPE_LED>; |
| 1488 | }; |
| 1489 | |
| 1490 | led@6 { |
| 1491 | label = "nvme6"; |
| 1492 | reg = <6>; |
| 1493 | retain-state-shutdown; |
| 1494 | default-state = "keep"; |
| 1495 | type = <PCA955X_TYPE_LED>; |
| 1496 | }; |
| 1497 | |
| 1498 | led@7 { |
| 1499 | label = "nvme7"; |
| 1500 | reg = <7>; |
| 1501 | retain-state-shutdown; |
| 1502 | default-state = "keep"; |
| 1503 | type = <PCA955X_TYPE_LED>; |
| 1504 | }; |
| 1505 | }; |
| 1506 | }; |
| 1507 | |
| 1508 | &i2c14 { |
| 1509 | status = "okay"; |
| 1510 | |
| 1511 | eeprom@50 { |
| 1512 | compatible = "atmel,24c64"; |
| 1513 | reg = <0x50>; |
| 1514 | }; |
| 1515 | |
| 1516 | pca9552@60 { |
| 1517 | compatible = "nxp,pca9552"; |
| 1518 | reg = <0x60>; |
| 1519 | #address-cells = <1>; |
| 1520 | #size-cells = <0>; |
| 1521 | |
| 1522 | gpio-controller; |
| 1523 | #gpio-cells = <2>; |
| 1524 | |
| 1525 | led@0 { |
| 1526 | label = "nvme8"; |
| 1527 | reg = <0>; |
| 1528 | retain-state-shutdown; |
| 1529 | default-state = "keep"; |
| 1530 | type = <PCA955X_TYPE_LED>; |
| 1531 | }; |
| 1532 | |
| 1533 | led@1 { |
| 1534 | label = "nvme9"; |
| 1535 | reg = <1>; |
| 1536 | retain-state-shutdown; |
| 1537 | default-state = "keep"; |
| 1538 | type = <PCA955X_TYPE_LED>; |
| 1539 | }; |
| 1540 | |
| 1541 | led@2 { |
| 1542 | label = "nvme10"; |
| 1543 | reg = <2>; |
| 1544 | retain-state-shutdown; |
| 1545 | default-state = "keep"; |
| 1546 | type = <PCA955X_TYPE_LED>; |
| 1547 | }; |
| 1548 | |
| 1549 | led@3 { |
| 1550 | label = "nvme11"; |
| 1551 | reg = <3>; |
| 1552 | retain-state-shutdown; |
| 1553 | default-state = "keep"; |
| 1554 | type = <PCA955X_TYPE_LED>; |
| 1555 | }; |
| 1556 | |
| 1557 | led@4 { |
| 1558 | label = "nvme12"; |
| 1559 | reg = <4>; |
| 1560 | retain-state-shutdown; |
| 1561 | default-state = "keep"; |
| 1562 | type = <PCA955X_TYPE_LED>; |
| 1563 | }; |
| 1564 | |
| 1565 | led@5 { |
| 1566 | label = "nvme13"; |
| 1567 | reg = <5>; |
| 1568 | retain-state-shutdown; |
| 1569 | default-state = "keep"; |
| 1570 | type = <PCA955X_TYPE_LED>; |
| 1571 | }; |
| 1572 | |
| 1573 | led@6 { |
| 1574 | label = "nvme14"; |
| 1575 | reg = <6>; |
| 1576 | retain-state-shutdown; |
| 1577 | default-state = "keep"; |
| 1578 | type = <PCA955X_TYPE_LED>; |
| 1579 | }; |
| 1580 | |
| 1581 | led@7 { |
| 1582 | label = "nvme15"; |
| 1583 | reg = <7>; |
| 1584 | retain-state-shutdown; |
| 1585 | default-state = "keep"; |
| 1586 | type = <PCA955X_TYPE_LED>; |
| 1587 | }; |
| 1588 | }; |
| 1589 | }; |
| 1590 | |
| 1591 | &i2c15 { |
| 1592 | status = "okay"; |
| 1593 | |
| 1594 | eeprom@50 { |
| 1595 | compatible = "atmel,24c64"; |
| 1596 | reg = <0x50>; |
| 1597 | }; |
| 1598 | |
| 1599 | pca9552@60 { |
| 1600 | compatible = "nxp,pca9552"; |
| 1601 | reg = <0x60>; |
| 1602 | #address-cells = <1>; |
| 1603 | #size-cells = <0>; |
| 1604 | |
| 1605 | gpio-controller; |
| 1606 | #gpio-cells = <2>; |
| 1607 | |
| 1608 | led@0 { |
| 1609 | label = "nvme16"; |
| 1610 | reg = <0>; |
| 1611 | retain-state-shutdown; |
| 1612 | default-state = "keep"; |
| 1613 | type = <PCA955X_TYPE_LED>; |
| 1614 | }; |
| 1615 | |
| 1616 | led@1 { |
| 1617 | label = "nvme17"; |
| 1618 | reg = <1>; |
| 1619 | retain-state-shutdown; |
| 1620 | default-state = "keep"; |
| 1621 | type = <PCA955X_TYPE_LED>; |
| 1622 | }; |
| 1623 | |
| 1624 | led@2 { |
| 1625 | label = "nvme18"; |
| 1626 | reg = <2>; |
| 1627 | retain-state-shutdown; |
| 1628 | default-state = "keep"; |
| 1629 | type = <PCA955X_TYPE_LED>; |
| 1630 | }; |
| 1631 | |
| 1632 | led@3 { |
| 1633 | label = "nvme19"; |
| 1634 | reg = <3>; |
| 1635 | retain-state-shutdown; |
| 1636 | default-state = "keep"; |
| 1637 | type = <PCA955X_TYPE_LED>; |
| 1638 | }; |
| 1639 | |
| 1640 | led@4 { |
| 1641 | label = "nvme20"; |
| 1642 | reg = <4>; |
| 1643 | retain-state-shutdown; |
| 1644 | default-state = "keep"; |
| 1645 | type = <PCA955X_TYPE_LED>; |
| 1646 | }; |
| 1647 | |
| 1648 | led@5 { |
| 1649 | label = "nvme21"; |
| 1650 | reg = <5>; |
| 1651 | retain-state-shutdown; |
| 1652 | default-state = "keep"; |
| 1653 | type = <PCA955X_TYPE_LED>; |
| 1654 | }; |
| 1655 | |
| 1656 | led@6 { |
| 1657 | label = "nvme22"; |
| 1658 | reg = <6>; |
| 1659 | retain-state-shutdown; |
| 1660 | default-state = "keep"; |
| 1661 | type = <PCA955X_TYPE_LED>; |
| 1662 | }; |
| 1663 | |
| 1664 | led@7 { |
| 1665 | label = "nvme23"; |
| 1666 | reg = <7>; |
| 1667 | retain-state-shutdown; |
| 1668 | default-state = "keep"; |
| 1669 | type = <PCA955X_TYPE_LED>; |
| 1670 | }; |
| 1671 | }; |
| 1672 | }; |
| 1673 | |
| 1674 | &uart2 { |
| 1675 | status = "okay"; |
| 1676 | }; |
| 1677 | |
| 1678 | &vuart1 { |
| 1679 | status = "okay"; |
| 1680 | }; |
| 1681 | |
| 1682 | &vuart2 { |
| 1683 | status = "okay"; |
| 1684 | }; |
| 1685 | |
| 1686 | &lpc_ctrl { |
| 1687 | status = "okay"; |
| 1688 | memory-region = <&flash_memory>; |
| 1689 | }; |
| 1690 | |
| 1691 | &mac2 { |
| 1692 | status = "okay"; |
| 1693 | pinctrl-names = "default"; |
| 1694 | pinctrl-0 = <&pinctrl_rmii3_default>; |
| 1695 | clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, |
| 1696 | <&syscon ASPEED_CLK_MAC3RCLK>; |
| 1697 | clock-names = "MACCLK", "RCLK"; |
| 1698 | use-ncsi; |
| 1699 | }; |
| 1700 | |
| 1701 | &mac3 { |
| 1702 | status = "okay"; |
| 1703 | pinctrl-names = "default"; |
| 1704 | pinctrl-0 = <&pinctrl_rmii4_default>; |
| 1705 | clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>, |
| 1706 | <&syscon ASPEED_CLK_MAC4RCLK>; |
| 1707 | clock-names = "MACCLK", "RCLK"; |
| 1708 | use-ncsi; |
| 1709 | }; |
| 1710 | |
| 1711 | &wdt1 { |
| 1712 | aspeed,reset-type = "none"; |
| 1713 | aspeed,external-signal; |
| 1714 | aspeed,ext-push-pull; |
| 1715 | aspeed,ext-active-high; |
| 1716 | |
| 1717 | pinctrl-names = "default"; |
| 1718 | pinctrl-0 = <&pinctrl_wdtrst1_default>; |
| 1719 | }; |
| 1720 | |
| 1721 | &wdt2 { |
| 1722 | status = "okay"; |
| 1723 | }; |
| 1724 | |
| 1725 | &xdma { |
| 1726 | status = "okay"; |
| 1727 | memory-region = <&vga_memory>; |
| 1728 | }; |
| 1729 | |
| 1730 | &kcs2 { |
| 1731 | status = "okay"; |
| 1732 | aspeed,lpc-io-reg = <0xca8 0xcac>; |
| 1733 | }; |
| 1734 | |
| 1735 | &kcs3 { |
| 1736 | status = "okay"; |
| 1737 | aspeed,lpc-io-reg = <0xca2>; |
| 1738 | aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>; |
| 1739 | }; |
| 1740 | |
| 1741 | #include "ibm-power10-quad.dtsi" |