Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /dts-v1/; |
| 3 | |
| 4 | #include "aspeed-g5.dtsi" |
| 5 | #include <dt-bindings/gpio/aspeed-gpio.h> |
| 6 | #include <dt-bindings/interrupt-controller/irq.h> |
| 7 | |
| 8 | /{ |
| 9 | model = "ASRock ROMED8HM3 BMC v1.00"; |
| 10 | compatible = "asrock,romed8hm3-bmc", "aspeed,ast2500"; |
| 11 | |
| 12 | aliases { |
| 13 | serial4 = &uart5; |
| 14 | }; |
| 15 | |
| 16 | chosen { |
| 17 | stdout-path = &uart5; |
| 18 | bootargs = "console=tty0 console=ttyS4,115200 earlycon"; |
| 19 | }; |
| 20 | |
| 21 | memory@80000000 { |
| 22 | reg = <0x80000000 0x20000000>; |
| 23 | }; |
| 24 | |
| 25 | leds { |
| 26 | compatible = "gpio-leds"; |
| 27 | |
| 28 | heartbeat { |
| 29 | gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>; |
| 30 | linux,default-trigger = "timer"; |
| 31 | }; |
| 32 | |
| 33 | system-fault { |
| 34 | gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; |
| 35 | panic-indicator; |
| 36 | }; |
| 37 | }; |
| 38 | |
| 39 | iio-hwmon { |
| 40 | compatible = "iio-hwmon"; |
| 41 | io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, |
| 42 | <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, |
| 43 | <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, |
| 44 | <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>; |
| 45 | }; |
| 46 | }; |
| 47 | |
| 48 | &fmc { |
| 49 | status = "okay"; |
| 50 | flash@0 { |
| 51 | status = "okay"; |
| 52 | m25p,fast-read; |
| 53 | label = "bmc"; |
| 54 | spi-max-frequency = <50000000>; /* 50 MHz */ |
| 55 | #include "openbmc-flash-layout-64.dtsi" |
| 56 | }; |
| 57 | }; |
| 58 | |
| 59 | &uart5 { |
| 60 | status = "okay"; |
| 61 | }; |
| 62 | |
| 63 | &vuart { |
| 64 | status = "okay"; |
| 65 | aspeed,lpc-io-reg = <0x2f8>; |
| 66 | aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; |
| 67 | }; |
| 68 | |
| 69 | &mac0 { |
| 70 | status = "okay"; |
| 71 | |
| 72 | pinctrl-names = "default"; |
| 73 | pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; |
| 74 | }; |
| 75 | |
| 76 | &i2c0 { |
| 77 | status = "okay"; |
| 78 | |
| 79 | /* inlet temp sensor */ |
| 80 | w83773g@4c { |
| 81 | compatible = "nuvoton,w83773g"; |
| 82 | reg = <0x4c>; |
| 83 | }; |
| 84 | }; |
| 85 | |
| 86 | &i2c1 { |
| 87 | status = "okay"; |
| 88 | }; |
| 89 | |
| 90 | &i2c2 { |
| 91 | status = "okay"; |
| 92 | |
| 93 | /* IPB temp sensor */ |
| 94 | w83773g@4c { |
| 95 | compatible = "nuvoton,w83773g"; |
| 96 | reg = <0x4c>; |
| 97 | }; |
| 98 | |
| 99 | /* IPB PMIC */ |
| 100 | lm25066@40 { |
| 101 | compatible = "lm25066"; |
| 102 | reg = <0x40>; |
| 103 | shunt-resistor-micro-ohms = <1000>; |
| 104 | }; |
| 105 | |
| 106 | /* 12VSB PMIC */ |
| 107 | lm25066@41 { |
| 108 | compatible = "lm25066"; |
| 109 | reg = <0x41>; |
| 110 | shunt-resistor-micro-ohms = <10000>; |
| 111 | }; |
| 112 | }; |
| 113 | |
| 114 | &i2c4 { |
| 115 | status = "okay"; |
| 116 | }; |
| 117 | |
| 118 | &i2c5 { |
| 119 | status = "okay"; |
| 120 | }; |
| 121 | |
| 122 | &i2c6 { |
| 123 | status = "okay"; |
| 124 | }; |
| 125 | |
| 126 | &i2c7 { |
| 127 | status = "okay"; |
| 128 | |
| 129 | /* Baseboard FRU eeprom */ |
| 130 | eeprom@50 { |
| 131 | compatible = "st,24c128", "atmel,24c128"; |
| 132 | reg = <0x50>; |
| 133 | pagesize = <16>; |
| 134 | }; |
| 135 | }; |
| 136 | |
| 137 | &i2c8 { |
| 138 | status = "okay"; |
| 139 | }; |
| 140 | |
| 141 | &i2c9 { |
| 142 | status = "okay"; |
| 143 | }; |
| 144 | |
| 145 | &video { |
| 146 | status = "okay"; |
| 147 | }; |
| 148 | |
| 149 | &vhub { |
| 150 | status = "okay"; |
| 151 | }; |
| 152 | |
| 153 | &lpc_ctrl { |
| 154 | status = "okay"; |
| 155 | }; |
| 156 | |
| 157 | &lpc_snoop { |
| 158 | status = "okay"; |
| 159 | snoop-ports = <0x80>; |
| 160 | }; |
| 161 | |
| 162 | &kcs3 { |
| 163 | status = "okay"; |
| 164 | aspeed,lpc-io-reg = <0xca2>; |
| 165 | }; |
| 166 | |
| 167 | &pwm_tacho { |
| 168 | status = "okay"; |
| 169 | pinctrl-names = "default"; |
| 170 | pinctrl-0 = <&pinctrl_pwm3_default |
| 171 | &pinctrl_pwm4_default |
| 172 | &pinctrl_pwm5_default |
| 173 | &pinctrl_pwm6_default>; |
| 174 | |
| 175 | fan@3 { |
| 176 | reg = <0x03>; |
| 177 | aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0b>; |
| 178 | }; |
| 179 | |
| 180 | fan@4 { |
| 181 | reg = <0x04>; |
| 182 | aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0c>; |
| 183 | }; |
| 184 | |
| 185 | fan@5 { |
| 186 | reg = <0x05>; |
| 187 | aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0d>; |
| 188 | }; |
| 189 | |
| 190 | fan@6 { |
| 191 | reg = <0x06>; |
| 192 | aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0e>; |
| 193 | }; |
| 194 | }; |
| 195 | |
| 196 | &gpio { |
| 197 | status = "okay"; |
| 198 | gpio-line-names = |
| 199 | /* A */ "LOCATORLED_STATUS_N", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI", |
| 200 | "", "", "", "", |
| 201 | /* B */ "POST_COMPLETE_N", "", "", "", "", "", "", "", |
| 202 | /* C */ "", "", "", "", "PCIE_HP_SEL_N", "PCIE_SATA_SEL_N", "LOCATORBTN", "", |
| 203 | /* D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON", |
| 204 | "", "", "", "PSU_FAN_FAIL_N", |
| 205 | /* E */ "", "", "", "", "", "", "", "", |
| 206 | /* F */ "NIC_PWR_GOOD", "PRSNTB0", "PRSNTB1", "PRSNTB2", |
| 207 | "PRSNTB3", "", "3VSB_PCIE1_PG", "12V_PCIE1_PG", |
| 208 | /* G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2", |
| 209 | "BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "BMC_ALERT4_N", |
| 210 | /* H */ "X24_C1_PRSNT", "X24_C2_PRSNT", "X24_C3_PRSNT", "FM_MEM_THERM_EVENT_BMC_R_N", |
| 211 | "FACMODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN", |
| 212 | /* I */ "", "", "", "", "", "", "", "", |
| 213 | /* J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "", "P0_MA_DDR_QS_CS_N", |
| 214 | "", "", "", "", |
| 215 | /* K */ "", "", "", "", "", "", "", "", |
| 216 | /* L */ "", "", "", "", "", "", "", "", |
| 217 | /* M */ "", "", "MEZZ_PWRBRK_N", "OCP_HP_RST_EN", |
| 218 | "MAIN_PWR_EN_G", "BMC_MAIN_EN", "AUX_PWR_EN_G", "BMC_AUX_EN", |
| 219 | /* N */ "", "", "", "", "", "", "", "", |
| 220 | /* O */ "", "", "", "", "", "", "", "", |
| 221 | /* P */ "", "", "", "", "", "", "", "", |
| 222 | /* Q */ "", "", "", "", |
| 223 | "BMC_SMB_PRESENT_1_N", "BMC_SMB_PRESENT_2_N", |
| 224 | "BMC_SMB_PRESENT_3_N", "BMC_PCIE_WAKE_N", |
| 225 | /* R */ "", "", "THERMALTRIP_CLEAR_N", "", "", "", "", "", |
| 226 | /* S */ "", "", "", "", "", "", "", "", |
| 227 | /* T */ "", "", "", "", "", "", "", "", |
| 228 | /* U */ "", "", "", "", "", "", "", "", |
| 229 | /* V */ "", "", "", "", "", "", "", "", |
| 230 | /* W */ "", "", "", "", "", "", "", "", |
| 231 | /* X */ "", "", "", "", "", "", "", "", |
| 232 | /* Y */ "SLP_S3", "SLP_S4_S5", "NODE_ID_1", "NODE_ID_2", "", "", "", "", |
| 233 | /* Z */ "", "", "SYSTEM_FAULT_LED_N", "FAST_THROTTLE_N", |
| 234 | "", "", "", "", |
| 235 | /* AA */ "FM_CPU0_IBMC_THERMTRIP_N", "", "PROCHOT_L_G", "", |
| 236 | "", "", "", "", |
| 237 | /* AB */ "BMC_FORCE_SELFREFRESH", "PWRGD_OUT", "", "IRQ_BMC_PCH_SMI_LPC_N", |
| 238 | "", "", "", "", |
| 239 | /* AC */ "", "", "", "", "", "", "", ""; |
| 240 | }; |
| 241 | |
| 242 | &adc { |
| 243 | status = "okay"; |
| 244 | pinctrl-names = "default"; |
| 245 | pinctrl-0 = <&pinctrl_adc0_default |
| 246 | &pinctrl_adc1_default |
| 247 | &pinctrl_adc2_default |
| 248 | &pinctrl_adc3_default |
| 249 | &pinctrl_adc4_default |
| 250 | &pinctrl_adc5_default |
| 251 | &pinctrl_adc6_default |
| 252 | &pinctrl_adc7_default |
| 253 | &pinctrl_adc8_default |
| 254 | &pinctrl_adc9_default |
| 255 | &pinctrl_adc10_default |
| 256 | &pinctrl_adc11_default |
| 257 | &pinctrl_adc12_default |
| 258 | &pinctrl_adc13_default |
| 259 | &pinctrl_adc14_default |
| 260 | &pinctrl_adc15_default>; |
| 261 | }; |