Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | # SPDX-License-Identifier: GPL-2.0 |
| 2 | %YAML 1.2 |
| 3 | --- |
| 4 | $id: http://devicetree.org/schemas/spi/renesas,sh-msiof.yaml# |
| 5 | $schema: http://devicetree.org/meta-schemas/core.yaml# |
| 6 | |
| 7 | title: Renesas MSIOF SPI controller |
| 8 | |
| 9 | maintainers: |
| 10 | - Geert Uytterhoeven <geert+renesas@glider.be> |
| 11 | |
| 12 | allOf: |
| 13 | - $ref: spi-controller.yaml# |
| 14 | |
| 15 | properties: |
| 16 | compatible: |
| 17 | oneOf: |
| 18 | - items: |
| 19 | - const: renesas,msiof-sh73a0 # SH-Mobile AG5 |
| 20 | - const: renesas,sh-mobile-msiof # generic SH-Mobile compatible |
| 21 | # device |
| 22 | - items: |
| 23 | - enum: |
| 24 | - renesas,msiof-r8a7742 # RZ/G1H |
| 25 | - renesas,msiof-r8a7743 # RZ/G1M |
| 26 | - renesas,msiof-r8a7744 # RZ/G1N |
| 27 | - renesas,msiof-r8a7745 # RZ/G1E |
| 28 | - renesas,msiof-r8a77470 # RZ/G1C |
| 29 | - renesas,msiof-r8a7790 # R-Car H2 |
| 30 | - renesas,msiof-r8a7791 # R-Car M2-W |
| 31 | - renesas,msiof-r8a7792 # R-Car V2H |
| 32 | - renesas,msiof-r8a7793 # R-Car M2-N |
| 33 | - renesas,msiof-r8a7794 # R-Car E2 |
| 34 | - const: renesas,rcar-gen2-msiof # generic R-Car Gen2 and RZ/G1 |
| 35 | # compatible device |
| 36 | - items: |
| 37 | - enum: |
| 38 | - renesas,msiof-r8a774a1 # RZ/G2M |
| 39 | - renesas,msiof-r8a774b1 # RZ/G2N |
| 40 | - renesas,msiof-r8a774c0 # RZ/G2E |
| 41 | - renesas,msiof-r8a774e1 # RZ/G2H |
| 42 | - renesas,msiof-r8a7795 # R-Car H3 |
| 43 | - renesas,msiof-r8a7796 # R-Car M3-W |
| 44 | - renesas,msiof-r8a77961 # R-Car M3-W+ |
| 45 | - renesas,msiof-r8a77965 # R-Car M3-N |
| 46 | - renesas,msiof-r8a77970 # R-Car V3M |
| 47 | - renesas,msiof-r8a77980 # R-Car V3H |
| 48 | - renesas,msiof-r8a77990 # R-Car E3 |
| 49 | - renesas,msiof-r8a77995 # R-Car D3 |
| 50 | - const: renesas,rcar-gen3-msiof # generic R-Car Gen3 and RZ/G2 |
| 51 | # compatible device |
| 52 | - items: |
| 53 | - enum: |
| 54 | - renesas,msiof-r8a779a0 # R-Car V3U |
| 55 | - renesas,msiof-r8a779f0 # R-Car S4-8 |
| 56 | - renesas,msiof-r8a779g0 # R-Car V4H |
| 57 | - const: renesas,rcar-gen4-msiof # generic R-Car Gen4 |
| 58 | # compatible device |
| 59 | - items: |
| 60 | - const: renesas,sh-msiof # deprecated |
| 61 | |
| 62 | reg: |
| 63 | minItems: 1 |
| 64 | maxItems: 2 |
| 65 | oneOf: |
| 66 | - items: |
| 67 | - description: CPU and DMA engine registers |
| 68 | - items: |
| 69 | - description: CPU registers |
| 70 | - description: DMA engine registers |
| 71 | |
| 72 | interrupts: |
| 73 | maxItems: 1 |
| 74 | |
| 75 | clocks: |
| 76 | maxItems: 1 |
| 77 | |
| 78 | power-domains: |
| 79 | maxItems: 1 |
| 80 | |
| 81 | resets: |
| 82 | maxItems: 1 |
| 83 | |
| 84 | num-cs: |
| 85 | description: | |
| 86 | Total number of chip selects (default is 1). |
| 87 | Up to 3 native chip selects are supported: |
| 88 | 0: MSIOF_SYNC |
| 89 | 1: MSIOF_SS1 |
| 90 | 2: MSIOF_SS2 |
| 91 | Hardware limitations related to chip selects: |
| 92 | - Native chip selects are always deasserted in between transfers |
| 93 | that are part of the same message. Use cs-gpios to work around |
| 94 | this. |
| 95 | - All slaves using native chip selects must use the same spi-cs-high |
| 96 | configuration. Use cs-gpios to work around this. |
| 97 | - When using GPIO chip selects, at least one native chip select must |
| 98 | be left unused, as it will be driven anyway. |
| 99 | minimum: 1 |
| 100 | maximum: 3 |
| 101 | default: 1 |
| 102 | |
| 103 | dmas: |
| 104 | minItems: 2 |
| 105 | maxItems: 4 |
| 106 | |
| 107 | dma-names: |
| 108 | minItems: 2 |
| 109 | maxItems: 4 |
| 110 | items: |
| 111 | enum: [ tx, rx ] |
| 112 | |
| 113 | renesas,dtdl: |
| 114 | description: delay sync signal (setup) in transmit mode. |
| 115 | $ref: /schemas/types.yaml#/definitions/uint32 |
| 116 | enum: |
| 117 | - 0 # no bit delay |
| 118 | - 50 # 0.5-clock-cycle delay |
| 119 | - 100 # 1-clock-cycle delay |
| 120 | - 150 # 1.5-clock-cycle delay |
| 121 | - 200 # 2-clock-cycle delay |
| 122 | |
| 123 | renesas,syncdl: |
| 124 | description: delay sync signal (hold) in transmit mode |
| 125 | $ref: /schemas/types.yaml#/definitions/uint32 |
| 126 | enum: |
| 127 | - 0 # no bit delay |
| 128 | - 50 # 0.5-clock-cycle delay |
| 129 | - 100 # 1-clock-cycle delay |
| 130 | - 150 # 1.5-clock-cycle delay |
| 131 | - 200 # 2-clock-cycle delay |
| 132 | - 300 # 3-clock-cycle delay |
| 133 | |
| 134 | renesas,tx-fifo-size: |
| 135 | # deprecated for soctype-specific bindings |
| 136 | description: | |
| 137 | Override the default TX fifo size. Unit is words. Ignored if 0. |
| 138 | $ref: /schemas/types.yaml#/definitions/uint32 |
| 139 | default: 64 |
| 140 | |
| 141 | renesas,rx-fifo-size: |
| 142 | # deprecated for soctype-specific bindings |
| 143 | description: | |
| 144 | Override the default RX fifo size. Unit is words. Ignored if 0. |
| 145 | $ref: /schemas/types.yaml#/definitions/uint32 |
| 146 | default: 64 |
| 147 | |
| 148 | required: |
| 149 | - compatible |
| 150 | - reg |
| 151 | - interrupts |
| 152 | - clocks |
| 153 | - power-domains |
| 154 | - '#address-cells' |
| 155 | - '#size-cells' |
| 156 | |
| 157 | if: |
| 158 | not: |
| 159 | properties: |
| 160 | compatible: |
| 161 | contains: |
| 162 | const: renesas,sh-mobile-msiof |
| 163 | then: |
| 164 | required: |
| 165 | - resets |
| 166 | |
| 167 | unevaluatedProperties: false |
| 168 | |
| 169 | examples: |
| 170 | - | |
| 171 | #include <dt-bindings/clock/r8a7791-cpg-mssr.h> |
| 172 | #include <dt-bindings/interrupt-controller/arm-gic.h> |
| 173 | #include <dt-bindings/power/r8a7791-sysc.h> |
| 174 | |
| 175 | msiof0: spi@e6e20000 { |
| 176 | compatible = "renesas,msiof-r8a7791", "renesas,rcar-gen2-msiof"; |
| 177 | reg = <0xe6e20000 0x0064>; |
| 178 | interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; |
| 179 | clocks = <&cpg CPG_MOD 000>; |
| 180 | dmas = <&dmac0 0x51>, <&dmac0 0x52>; |
| 181 | dma-names = "tx", "rx"; |
| 182 | power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; |
| 183 | resets = <&cpg 0>; |
| 184 | #address-cells = <1>; |
| 185 | #size-cells = <0>; |
| 186 | }; |