| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | Texas Instruments TAS5711/TAS5717/TAS5719/TAS5721 stereo power amplifiers |
| 2 | |
| 3 | The codec is controlled through an I2C interface. It also has two other |
| 4 | signals that can be wired up to GPIOs: reset (strongly recommended), and |
| 5 | powerdown (optional). |
| 6 | |
| 7 | Required properties: |
| 8 | |
| 9 | - compatible: should be one of the following: |
| 10 | - "ti,tas5707" |
| 11 | - "ti,tas5711", |
| 12 | - "ti,tas5717", |
| 13 | - "ti,tas5719", |
| 14 | - "ti,tas5721" |
| 15 | - "ti,tas5733" |
| 16 | - reg: The I2C address of the device |
| 17 | - #sound-dai-cells: must be equal to 0 |
| 18 | |
| 19 | Optional properties: |
| 20 | |
| 21 | - reset-gpios: GPIO specifier for the TAS571x's active low reset line |
| 22 | - pdn-gpios: GPIO specifier for the TAS571x's active low powerdown line |
| 23 | - clocks: clock phandle for the MCLK input |
| 24 | - clock-names: should be "mclk" |
| 25 | - AVDD-supply: regulator phandle for the AVDD supply (all chips) |
| 26 | - DVDD-supply: regulator phandle for the DVDD supply (all chips) |
| 27 | - HPVDD-supply: regulator phandle for the HPVDD supply (5717/5719) |
| 28 | - PVDD_AB-supply: regulator phandle for the PVDD_AB supply (5717/5719) |
| 29 | - PVDD_CD-supply: regulator phandle for the PVDD_CD supply (5717/5719) |
| 30 | - PVDD_A-supply: regulator phandle for the PVDD_A supply (5711) |
| 31 | - PVDD_B-supply: regulator phandle for the PVDD_B supply (5711) |
| 32 | - PVDD_C-supply: regulator phandle for the PVDD_C supply (5711) |
| 33 | - PVDD_D-supply: regulator phandle for the PVDD_D supply (5711) |
| 34 | - DRVDD-supply: regulator phandle for the DRVDD supply (5721) |
| 35 | - PVDD-supply: regulator phandle for the PVDD supply (5721) |
| 36 | |
| 37 | Example: |
| 38 | |
| 39 | tas5717: audio-codec@2a { |
| 40 | compatible = "ti,tas5717"; |
| 41 | reg = <0x2a>; |
| 42 | #sound-dai-cells = <0>; |
| 43 | |
| 44 | reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; |
| 45 | pdn-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; |
| 46 | |
| 47 | clocks = <&clk_core CLK_I2S>; |
| 48 | clock-names = "mclk"; |
| 49 | }; |