Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 53633a893a06bd5a0c807287d9cc29337806eaf7 / . / Bindings / mfd / samsung,s5m8767.yaml
blob: aea0b7d57d04e044036403dbe820548dda96b647 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame^]1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/mfd/samsung,s5m8767.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Samsung S5M8767 Power Management IC
8
9maintainers:
10 - Krzysztof Kozlowski <krzk@kernel.org>
11
12description: |
13 This is a part of device tree bindings for S2M and S5M family of Power
14 Management IC (PMIC).
15
16 The Samsung S5M8767 is a Power Management IC which includes voltage
17 and current regulators, RTC, clock outputs and other sub-blocks.
18
19properties:
20 compatible:
21 const: samsung,s5m8767-pmic
22
23 clocks:
24 $ref: ../clock/samsung,s2mps11.yaml
25 description:
26 Child node describing clock provider.
27
28 interrupts:
29 maxItems: 1
30
31 reg:
32 maxItems: 1
33
34 regulators:
35 $ref: ../regulator/samsung,s5m8767.yaml
36 description:
37 List of child nodes that specify the regulators.
38
39 s5m8767,pmic-buck2-dvs-voltage:
40 $ref: /schemas/types.yaml#/definitions/uint32-array
41 minItems: 8
42 maxItems: 8
43 description: |
44 A set of 8 voltage values in micro-volt (uV) units for buck2 when
45 changing voltage using gpio dvs.
46
47 s5m8767,pmic-buck3-dvs-voltage:
48 $ref: /schemas/types.yaml#/definitions/uint32-array
49 minItems: 8
50 maxItems: 8
51 description: |
52 A set of 8 voltage values in micro-volt (uV) units for buck3 when
53 changing voltage using gpio dvs.
54
55 s5m8767,pmic-buck4-dvs-voltage:
56 $ref: /schemas/types.yaml#/definitions/uint32-array
57 minItems: 8
58 maxItems: 8
59 description: |
60 A set of 8 voltage values in micro-volt (uV) units for buck4 when
61 changing voltage using gpio dvs.
62
63 s5m8767,pmic-buck-ds-gpios:
64 minItems: 3
65 maxItems: 3
66 description: |
67 GPIO specifiers for three host gpio's used for selecting GPIO DVS lines.
68 It is one-to-one mapped to dvs gpio lines.
69
70 s5m8767,pmic-buck2-uses-gpio-dvs:
71 type: boolean
72 description: buck2 can be controlled by gpio dvs.
73
74 s5m8767,pmic-buck3-uses-gpio-dvs:
75 type: boolean
76 description: buck3 can be controlled by gpio dvs.
77
78 s5m8767,pmic-buck4-uses-gpio-dvs:
79 type: boolean
80 description: buck4 can be controlled by gpio dvs.
81
82 s5m8767,pmic-buck-default-dvs-idx:
83 $ref: /schemas/types.yaml#/definitions/uint32-array
84 minimum: 0
85 maximum: 7
86 default: 0
87 description: |
88 Default voltage setting selected from the possible 8 options selectable
89 by the dvs gpios. The value of this property should be between 0 and 7.
90 If not specified or if out of range, the default value of this property
91 is set to 0.
92
93 s5m8767,pmic-buck-dvs-gpios:
94 minItems: 3
95 maxItems: 3
96 description: |
97 GPIO specifiers for three host gpio's used for dvs.
98
99 vinb1-supply:
100 description: Power supply for buck1
101 vinb2-supply:
102 description: Power supply for buck2
103 vinb3-supply:
104 description: Power supply for buck3
105 vinb4-supply:
106 description: Power supply for buck4
107 vinb5-supply:
108 description: Power supply for buck5
109 vinb6-supply:
110 description: Power supply for buck6
111 vinb7-supply:
112 description: Power supply for buck7
113 vinb8-supply:
114 description: Power supply for buck8
115 vinb9-supply:
116 description: Power supply for buck9
117
118 vinl1-supply:
119 description: Power supply for LDO3, LDO10, LDO26, LDO27
120 vinl2-supply:
121 description: Power supply for LDO13, LDO16, LDO25, LDO28
122 vinl3-supply:
123 description: Power supply for LDO11, LDO14
124 vinl4-supply:
125 description: Power supply for LDO4, LDO9
126 vinl5-supply:
127 description: Power supply for LDO12, LDO17, LDO19, LDO23
128 vinl6-supply:
129 description: Power supply for LDO18, LDO20, LDO21, LDO24
130 vinl7-supply:
131 description: Power supply for LDO5, LDO22
132 vinl8-supply:
133 description: Power supply for LDO1, LDO6, LDO7, LDO8, LDO15
134 vinl9-supply:
135 description: Power supply for LDO2
136
137 wakeup-source: true
138
139required:
140 - compatible
141 - reg
142 - regulators
143 - s5m8767,pmic-buck-ds-gpios
144
145dependencies:
146 s5m8767,pmic-buck2-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
147 s5m8767,pmic-buck3-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
148 s5m8767,pmic-buck4-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
149 s5m8767,pmic-buck2-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck2-dvs-voltage' ]
150 s5m8767,pmic-buck3-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck3-dvs-voltage' ]
151 s5m8767,pmic-buck4-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck4-dvs-voltage' ]
152
153additionalProperties: false
154
155allOf:
156 - not:
157 required:
158 - s5m8767,pmic-buck2-uses-gpio-dvs
159 - s5m8767,pmic-buck3-uses-gpio-dvs
160 - not:
161 required:
162 - s5m8767,pmic-buck2-uses-gpio-dvs
163 - s5m8767,pmic-buck4-uses-gpio-dvs
164 - not:
165 required:
166 - s5m8767,pmic-buck3-uses-gpio-dvs
167 - s5m8767,pmic-buck4-uses-gpio-dvs
168
169examples:
170 - |
171 #include <dt-bindings/gpio/gpio.h>
172 #include <dt-bindings/interrupt-controller/irq.h>
173
174 i2c {
175 #address-cells = <1>;
176 #size-cells = <0>;
177
178 pmic@66 {
179 compatible = "samsung,s5m8767-pmic";
180 reg = <0x66>;
181
182 interrupt-parent = <&gpx3>;
183 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
184 pinctrl-names = "default";
185 pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
186 wakeup-source;
187
188 s5m8767,pmic-buck-default-dvs-idx = <3>;
189 s5m8767,pmic-buck2-uses-gpio-dvs;
190
191 s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>,
192 <&gpd1 1 GPIO_ACTIVE_LOW>,
193 <&gpd1 2 GPIO_ACTIVE_LOW>;
194
195 s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>,
196 <&gpx2 4 GPIO_ACTIVE_LOW>,
197 <&gpx2 5 GPIO_ACTIVE_LOW>;
198
199 s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
200 <1250000>, <1200000>,
201 <1150000>, <1100000>,
202 <1000000>, <950000>;
203
204 s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
205 <1100000>, <1100000>,
206 <1000000>, <1000000>,
207 <1000000>, <1000000>;
208
209 s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
210 <1200000>, <1200000>,
211 <1200000>, <1200000>,
212 <1200000>, <1200000>;
213
214 clocks {
215 compatible = "samsung,s5m8767-clk";
216 #clock-cells = <1>;
217 clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt";
218 };
219
220 regulators {
221 LDO1 {
222 regulator-name = "VDD_ALIVE";
223 regulator-min-microvolt = <1100000>;
224 regulator-max-microvolt = <1100000>;
225 regulator-always-on;
226 regulator-boot-on;
227 op_mode = <1>; /* Normal Mode */
228 };
229
230 // ...
231
232 BUCK1 {
233 regulator-name = "VDD_MIF";
234 regulator-min-microvolt = <950000>;
235 regulator-max-microvolt = <1100000>;
236 regulator-always-on;
237 regulator-boot-on;
238 op_mode = <1>; /* Normal Mode */
239 };
240
241 BUCK2 {
242 regulator-name = "VDD_ARM";
243 regulator-min-microvolt = <900000>;
244 regulator-max-microvolt = <1350000>;
245 regulator-always-on;
246 regulator-boot-on;
247 op_mode = <1>; /* Normal Mode */
248 };
249
250 // ...
251 };
252 };
253 };
254
255 - |
256 #include <dt-bindings/gpio/gpio.h>
257 #include <dt-bindings/interrupt-controller/irq.h>
258
259 i2c {
260 #address-cells = <1>;
261 #size-cells = <0>;
262
263 pmic@66 {
264 compatible = "samsung,s5m8767-pmic";
265 reg = <0x66>;
266
267 interrupt-parent = <&gpx3>;
268 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
269 pinctrl-names = "default";
270 pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
271 wakeup-source;
272
273 s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>,
274 <&gpx2 4 GPIO_ACTIVE_LOW>,
275 <&gpx2 5 GPIO_ACTIVE_LOW>;
276
277 clocks {
278 compatible = "samsung,s5m8767-clk";
279 #clock-cells = <1>;
280 clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt";
281 };
282
283 regulators {
284 LDO1 {
285 regulator-name = "VDD_ALIVE";
286 regulator-min-microvolt = <1100000>;
287 regulator-max-microvolt = <1100000>;
288 regulator-always-on;
289 regulator-boot-on;
290 op_mode = <1>; /* Normal Mode */
291 };
292
293 // ...
294 };
295 };
296 };