Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| 2 | %YAML 1.2 |
| 3 | --- |
| 4 | $id: http://devicetree.org/schemas/mfd/rockchip,rk805.yaml# |
| 5 | $schema: http://devicetree.org/meta-schemas/core.yaml# |
| 6 | |
| 7 | title: RK805 Power Management Integrated Circuit |
| 8 | |
| 9 | maintainers: |
| 10 | - Chris Zhong <zyw@rock-chips.com> |
| 11 | - Zhang Qing <zhangqing@rock-chips.com> |
| 12 | |
| 13 | description: | |
| 14 | Rockchip RK805 series PMIC. This device consists of an i2c controlled MFD |
| 15 | that includes multiple switchable regulators. |
| 16 | |
| 17 | properties: |
| 18 | compatible: |
| 19 | enum: |
| 20 | - rockchip,rk805 |
| 21 | |
| 22 | reg: |
| 23 | maxItems: 1 |
| 24 | |
| 25 | interrupts: |
| 26 | maxItems: 1 |
| 27 | |
| 28 | '#clock-cells': |
| 29 | description: |
| 30 | See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. |
| 31 | minimum: 0 |
| 32 | maximum: 1 |
| 33 | |
| 34 | clock-output-names: |
| 35 | description: |
| 36 | From common clock binding to override the default output clock name. |
| 37 | |
| 38 | gpio-controller: true |
| 39 | |
| 40 | '#gpio-cells': |
| 41 | const: 2 |
| 42 | |
| 43 | rockchip,system-power-controller: |
| 44 | type: boolean |
| 45 | deprecated: true |
| 46 | description: |
| 47 | Telling whether or not this PMIC is controlling the system power. |
| 48 | |
| 49 | system-power-controller: true |
| 50 | |
| 51 | wakeup-source: |
| 52 | type: boolean |
| 53 | description: |
| 54 | Device can be used as a wakeup source. |
| 55 | |
| 56 | vcc1-supply: |
| 57 | description: |
| 58 | The input supply for DCDC_REG1. |
| 59 | |
| 60 | vcc2-supply: |
| 61 | description: |
| 62 | The input supply for DCDC_REG2. |
| 63 | |
| 64 | vcc3-supply: |
| 65 | description: |
| 66 | The input supply for DCDC_REG3. |
| 67 | |
| 68 | vcc4-supply: |
| 69 | description: |
| 70 | The input supply for DCDC_REG4. |
| 71 | |
| 72 | vcc5-supply: |
| 73 | description: |
| 74 | The input supply for LDO_REG1 and LDO_REG2. |
| 75 | |
| 76 | vcc6-supply: |
| 77 | description: |
| 78 | The input supply for LDO_REG3. |
| 79 | |
| 80 | regulators: |
| 81 | type: object |
| 82 | patternProperties: |
| 83 | "^(DCDC_REG[1-4]|LDO_REG[1-3])$": |
| 84 | type: object |
| 85 | $ref: ../regulator/regulator.yaml# |
| 86 | unevaluatedProperties: false |
| 87 | unevaluatedProperties: false |
| 88 | |
| 89 | allOf: |
| 90 | - if: |
| 91 | properties: |
| 92 | '#clock-cells': |
| 93 | const: 0 |
| 94 | |
| 95 | then: |
| 96 | properties: |
| 97 | clock-output-names: |
| 98 | maxItems: 1 |
| 99 | |
| 100 | else: |
| 101 | properties: |
| 102 | clock-output-names: |
| 103 | maxItems: 2 |
| 104 | |
| 105 | required: |
| 106 | - compatible |
| 107 | - reg |
| 108 | - interrupts |
| 109 | - "#clock-cells" |
| 110 | |
| 111 | additionalProperties: false |
| 112 | |
| 113 | examples: |
| 114 | - | |
| 115 | #include <dt-bindings/pinctrl/rockchip.h> |
| 116 | #include <dt-bindings/interrupt-controller/irq.h> |
| 117 | #include <dt-bindings/gpio/gpio.h> |
| 118 | i2c { |
| 119 | #address-cells = <1>; |
| 120 | #size-cells = <0>; |
| 121 | |
| 122 | pmic@18 { |
| 123 | compatible = "rockchip,rk805"; |
| 124 | reg = <0x18>; |
| 125 | interrupt-parent = <&gpio2>; |
| 126 | interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>; |
| 127 | pinctrl-names = "default"; |
| 128 | pinctrl-0 = <&pmic_int_l>; |
| 129 | rockchip,system-power-controller; |
| 130 | wakeup-source; |
| 131 | #clock-cells = <0>; |
| 132 | |
| 133 | vcc1-supply = <&vcc_sys>; |
| 134 | vcc2-supply = <&vcc_sys>; |
| 135 | vcc3-supply = <&vcc_sys>; |
| 136 | vcc4-supply = <&vcc_sys>; |
| 137 | vcc5-supply = <&vcc_io>; |
| 138 | vcc6-supply = <&vcc_io>; |
| 139 | |
| 140 | regulators { |
| 141 | vdd_logic: DCDC_REG1 { |
| 142 | regulator-name = "vdd_logic"; |
| 143 | regulator-min-microvolt = <700000>; |
| 144 | regulator-max-microvolt = <1350000>; |
| 145 | regulator-always-on; |
| 146 | regulator-boot-on; |
| 147 | regulator-state-mem { |
| 148 | regulator-on-in-suspend; |
| 149 | regulator-suspend-microvolt = <1000000>; |
| 150 | }; |
| 151 | }; |
| 152 | |
| 153 | vdd_arm: DCDC_REG2 { |
| 154 | regulator-name = "vdd_arm"; |
| 155 | regulator-min-microvolt = <700000>; |
| 156 | regulator-max-microvolt = <1350000>; |
| 157 | regulator-always-on; |
| 158 | regulator-boot-on; |
| 159 | regulator-state-mem { |
| 160 | regulator-on-in-suspend; |
| 161 | regulator-suspend-microvolt = <950000>; |
| 162 | }; |
| 163 | }; |
| 164 | |
| 165 | vcc_ddr: DCDC_REG3 { |
| 166 | regulator-name = "vcc_ddr"; |
| 167 | regulator-always-on; |
| 168 | regulator-boot-on; |
| 169 | regulator-state-mem { |
| 170 | regulator-on-in-suspend; |
| 171 | }; |
| 172 | }; |
| 173 | |
| 174 | vcc_io: DCDC_REG4 { |
| 175 | regulator-name = "vcc_io"; |
| 176 | regulator-min-microvolt = <3300000>; |
| 177 | regulator-max-microvolt = <3300000>; |
| 178 | regulator-always-on; |
| 179 | regulator-boot-on; |
| 180 | regulator-state-mem { |
| 181 | regulator-on-in-suspend; |
| 182 | regulator-suspend-microvolt = <3300000>; |
| 183 | }; |
| 184 | }; |
| 185 | |
| 186 | vdd_18: LDO_REG1 { |
| 187 | regulator-name = "vdd_18"; |
| 188 | regulator-min-microvolt = <1800000>; |
| 189 | regulator-max-microvolt = <1800000>; |
| 190 | regulator-always-on; |
| 191 | regulator-boot-on; |
| 192 | regulator-state-mem { |
| 193 | regulator-on-in-suspend; |
| 194 | regulator-suspend-microvolt = <1800000>; |
| 195 | }; |
| 196 | }; |
| 197 | |
| 198 | vcc18_emmc: LDO_REG2 { |
| 199 | regulator-name = "vcc_18emmc"; |
| 200 | regulator-min-microvolt = <1800000>; |
| 201 | regulator-max-microvolt = <1800000>; |
| 202 | regulator-always-on; |
| 203 | regulator-boot-on; |
| 204 | regulator-state-mem { |
| 205 | regulator-on-in-suspend; |
| 206 | regulator-suspend-microvolt = <1800000>; |
| 207 | }; |
| 208 | }; |
| 209 | |
| 210 | vdd_11: LDO_REG3 { |
| 211 | regulator-name = "vdd_11"; |
| 212 | regulator-min-microvolt = <1100000>; |
| 213 | regulator-max-microvolt = <1100000>; |
| 214 | regulator-always-on; |
| 215 | regulator-boot-on; |
| 216 | regulator-state-mem { |
| 217 | regulator-on-in-suspend; |
| 218 | regulator-suspend-microvolt = <1100000>; |
| 219 | }; |
| 220 | }; |
| 221 | }; |
| 222 | }; |
| 223 | }; |