Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| 2 | %YAML 1.2 |
| 3 | --- |
| 4 | $id: http://devicetree.org/schemas/mfd/cirrus,lochnagar.yaml# |
| 5 | $schema: http://devicetree.org/meta-schemas/core.yaml# |
| 6 | |
| 7 | title: Cirrus Logic Lochnagar Audio Development Board |
| 8 | |
| 9 | maintainers: |
| 10 | - patches@opensource.cirrus.com |
| 11 | |
| 12 | description: | |
| 13 | Lochnagar is an evaluation and development board for Cirrus Logic |
| 14 | Smart CODEC and Amp devices. It allows the connection of most Cirrus |
| 15 | Logic devices on mini-cards, as well as allowing connection of |
| 16 | various application processor systems to provide a full evaluation |
| 17 | platform. Audio system topology, clocking and power can all be |
| 18 | controlled through the Lochnagar, allowing the device under test |
| 19 | to be used in a variety of possible use cases. |
| 20 | |
| 21 | Also see these documents for generic binding information: |
| 22 | [1] GPIO : ../gpio/gpio.txt |
| 23 | |
| 24 | And these for relevant defines: |
| 25 | [2] include/dt-bindings/pinctrl/lochnagar.h |
| 26 | [3] include/dt-bindings/clock/lochnagar.h |
| 27 | |
| 28 | And these documents for the required sub-node binding details: |
| 29 | [4] Clock: ../clock/cirrus,lochnagar.yaml |
| 30 | [5] Pinctrl: ../pinctrl/cirrus,lochnagar.yaml |
| 31 | [6] Sound: ../sound/cirrus,lochnagar.yaml |
| 32 | [7] Hardware Monitor: ../hwmon/cirrus,lochnagar.yaml |
| 33 | |
| 34 | allOf: |
| 35 | - if: |
| 36 | properties: |
| 37 | compatible: |
| 38 | enum: |
| 39 | - cirrus,lochnagar2 |
| 40 | then: |
| 41 | properties: |
| 42 | lochnagar-hwmon: |
| 43 | type: object |
| 44 | $ref: /schemas/hwmon/cirrus,lochnagar.yaml# |
| 45 | |
| 46 | lochnagar-sc: |
| 47 | type: object |
| 48 | $ref: /schemas/sound/cirrus,lochnagar.yaml# |
| 49 | |
| 50 | properties: |
| 51 | compatible: |
| 52 | enum: |
| 53 | - cirrus,lochnagar1 |
| 54 | - cirrus,lochnagar2 |
| 55 | |
| 56 | reg: |
| 57 | const: 0x22 |
| 58 | |
| 59 | reset-gpios: |
| 60 | maxItems: 1 |
| 61 | |
| 62 | present-gpios: |
| 63 | description: | |
| 64 | Host present line, indicating the presence of a |
| 65 | host system, see [1]. This can be omitted if the present line is |
| 66 | tied in hardware. |
| 67 | maxItems: 1 |
| 68 | |
| 69 | lochnagar-clk: |
| 70 | type: object |
| 71 | $ref: /schemas/clock/cirrus,lochnagar.yaml# |
| 72 | |
| 73 | lochnagar-pmic32k: |
| 74 | type: object |
| 75 | $ref: /schemas/clock/fixed-clock.yaml# |
| 76 | properties: |
| 77 | clock-frequency: |
| 78 | const: 32768 |
| 79 | |
| 80 | lochnagar-clk12m: |
| 81 | type: object |
| 82 | $ref: /schemas/clock/fixed-clock.yaml# |
| 83 | properties: |
| 84 | clock-frequency: |
| 85 | const: 12288000 |
| 86 | |
| 87 | lochnagar-clk11m: |
| 88 | type: object |
| 89 | $ref: /schemas/clock/fixed-clock.yaml# |
| 90 | properties: |
| 91 | clock-frequency: |
| 92 | const: 11298600 |
| 93 | |
| 94 | lochnagar-clk24m: |
| 95 | type: object |
| 96 | $ref: /schemas/clock/fixed-clock.yaml# |
| 97 | properties: |
| 98 | clock-frequency: |
| 99 | const: 24576000 |
| 100 | |
| 101 | lochnagar-clk22m: |
| 102 | type: object |
| 103 | $ref: /schemas/clock/fixed-clock.yaml# |
| 104 | properties: |
| 105 | clock-frequency: |
| 106 | const: 22579200 |
| 107 | |
| 108 | lochnagar-clk8m: |
| 109 | type: object |
| 110 | $ref: /schemas/clock/fixed-clock.yaml# |
| 111 | properties: |
| 112 | clock-frequency: |
| 113 | const: 8192000 |
| 114 | |
| 115 | lochnagar-usb24m: |
| 116 | type: object |
| 117 | $ref: /schemas/clock/fixed-clock.yaml# |
| 118 | properties: |
| 119 | clock-frequency: |
| 120 | const: 24576000 |
| 121 | |
| 122 | lochnagar-usb12m: |
| 123 | type: object |
| 124 | $ref: /schemas/clock/fixed-clock.yaml# |
| 125 | properties: |
| 126 | clock-frequency: |
| 127 | const: 12288000 |
| 128 | |
| 129 | pinctrl: |
| 130 | type: object |
| 131 | $ref: /schemas/pinctrl/cirrus,lochnagar.yaml# |
| 132 | |
| 133 | lochnagar-hwmon: |
| 134 | type: object |
| 135 | $ref: /schemas/hwmon/cirrus,lochnagar.yaml# |
| 136 | |
| 137 | lochnagar-sc: |
| 138 | type: object |
| 139 | $ref: /schemas/sound/cirrus,lochnagar.yaml# |
| 140 | |
| 141 | VDDCORE: |
| 142 | description: |
| 143 | Initialisation data for the VDDCORE regulator, which supplies the |
| 144 | CODECs digital core if not being provided by an internal regulator. |
| 145 | type: object |
| 146 | $ref: /schemas/regulator/regulator.yaml# |
| 147 | unevaluatedProperties: false |
| 148 | properties: |
| 149 | compatible: |
| 150 | enum: |
| 151 | - cirrus,lochnagar2-vddcore |
| 152 | |
| 153 | SYSVDD-supply: |
| 154 | description: |
| 155 | Primary power supply for the Lochnagar. |
| 156 | required: |
| 157 | - compatible |
| 158 | |
| 159 | MICVDD: |
| 160 | description: |
| 161 | Initialisation data for the MICVDD regulator, which supplies the |
| 162 | CODECs MICVDD. |
| 163 | type: object |
| 164 | $ref: /schemas/regulator/regulator.yaml# |
| 165 | unevaluatedProperties: false |
| 166 | properties: |
| 167 | compatible: |
| 168 | enum: |
| 169 | - cirrus,lochnagar2-micvdd |
| 170 | |
| 171 | SYSVDD-supply: |
| 172 | description: |
| 173 | Primary power supply for the Lochnagar. |
| 174 | required: |
| 175 | - compatible |
| 176 | |
| 177 | MIC1VDD: |
| 178 | description: |
| 179 | Initialisation data for the MIC1VDD supplies. |
| 180 | type: object |
| 181 | $ref: /schemas/regulator/regulator.yaml# |
| 182 | unevaluatedProperties: false |
| 183 | properties: |
| 184 | compatible: |
| 185 | enum: |
| 186 | - cirrus,lochnagar2-mic1vdd |
| 187 | |
| 188 | cirrus,micbias-input: |
| 189 | description: |
| 190 | A property selecting which of the CODEC minicard micbias outputs |
| 191 | should be used. |
| 192 | $ref: /schemas/types.yaml#/definitions/uint32 |
| 193 | minimum: 1 |
| 194 | maximum: 4 |
| 195 | |
| 196 | MICBIAS1-supply: |
| 197 | description: |
| 198 | Regulator supplies for the MIC1VDD outputs, supplying the digital |
| 199 | microphones, normally supplied from the attached CODEC. |
| 200 | required: |
| 201 | - compatible |
| 202 | |
| 203 | MIC2VDD: |
| 204 | description: |
| 205 | Initialisation data for the MIC2VDD supplies. |
| 206 | type: object |
| 207 | $ref: /schemas/regulator/regulator.yaml# |
| 208 | unevaluatedProperties: false |
| 209 | properties: |
| 210 | compatible: |
| 211 | enum: |
| 212 | - cirrus,lochnagar2-mic2vdd |
| 213 | |
| 214 | cirrus,micbias-input: |
| 215 | description: |
| 216 | A property selecting which of the CODEC minicard micbias outputs |
| 217 | should be used. |
| 218 | $ref: /schemas/types.yaml#/definitions/uint32 |
| 219 | minimum: 1 |
| 220 | maximum: 4 |
| 221 | |
| 222 | MICBIAS2-supply: |
| 223 | description: |
| 224 | Regulator supplies for the MIC2VDD outputs, supplying the digital |
| 225 | microphones, normally supplied from the attached CODEC. |
| 226 | required: |
| 227 | - compatible |
| 228 | |
| 229 | VDD1V8: |
| 230 | description: |
| 231 | Recommended fixed regulator for the VDD1V8 regulator, which supplies |
| 232 | the CODECs analog and 1.8V digital supplies. |
| 233 | type: object |
| 234 | $ref: /schemas/regulator/regulator.yaml# |
| 235 | unevaluatedProperties: false |
| 236 | properties: |
| 237 | compatible: |
| 238 | enum: |
| 239 | - regulator-fixed |
| 240 | |
| 241 | regulator-min-microvolt: |
| 242 | const: 1800000 |
| 243 | |
| 244 | regulator-max-microvolt: |
| 245 | const: 1800000 |
| 246 | |
| 247 | vin-supply: |
| 248 | description: |
| 249 | Should be set to same supply as SYSVDD |
| 250 | required: |
| 251 | - compatible |
| 252 | - regulator-min-microvolt |
| 253 | - regulator-max-microvolt |
| 254 | - regulator-boot-on |
| 255 | - regulator-always-on |
| 256 | - vin-supply |
| 257 | |
| 258 | required: |
| 259 | - compatible |
| 260 | - reg |
| 261 | - reset-gpios |
| 262 | - lochnagar-clk |
| 263 | - pinctrl |
| 264 | |
| 265 | additionalProperties: false |
| 266 | |
| 267 | examples: |
| 268 | - | |
| 269 | #include <dt-bindings/clock/lochnagar.h> |
| 270 | #include <dt-bindings/pinctrl/lochnagar.h> |
| 271 | i2c@e0004000 { |
| 272 | #address-cells = <1>; |
| 273 | #size-cells = <0>; |
| 274 | reg = <0xe0004000 0x1000>; |
| 275 | |
| 276 | lochnagar: lochnagar@22 { |
| 277 | compatible = "cirrus,lochnagar2"; |
| 278 | reg = <0x22>; |
| 279 | |
| 280 | reset-gpios = <&gpio0 55 0>; |
| 281 | present-gpios = <&gpio0 60 0>; |
| 282 | |
| 283 | lochnagarclk: lochnagar-clk { |
| 284 | compatible = "cirrus,lochnagar2-clk"; |
| 285 | |
| 286 | #clock-cells = <1>; |
| 287 | clocks = <&clkaudio>, <&clkpmic>; |
| 288 | clock-names = "ln-gf-mclk2", "ln-pmic-32k"; |
| 289 | |
| 290 | assigned-clocks = <&lochnagarclk LOCHNAGAR_CDC_MCLK1>, |
| 291 | <&lochnagarclk LOCHNAGAR_CDC_MCLK2>; |
| 292 | assigned-clock-parents = <&clkaudio>, <&clkpmic>; |
| 293 | }; |
| 294 | |
| 295 | clkpmic: lochnagar-pmic32k { |
| 296 | compatible = "fixed-clock"; |
| 297 | #clock-cells = <0>; |
| 298 | clock-frequency = <32768>; |
| 299 | }; |
| 300 | |
| 301 | pinctrl { |
| 302 | compatible = "cirrus,lochnagar-pinctrl"; |
| 303 | |
| 304 | gpio-controller; |
| 305 | #gpio-cells = <2>; |
| 306 | gpio-ranges = <&lochnagar 0 0 LOCHNAGAR2_PIN_NUM_GPIOS>; |
| 307 | |
| 308 | pinctrl-names = "default"; |
| 309 | pinctrl-0 = <&pinsettings>; |
| 310 | |
| 311 | pinsettings: pin-settings { |
| 312 | ap2aif-pins { |
| 313 | input-enable; |
| 314 | groups = "gf-aif1"; |
| 315 | function = "codec-aif3"; |
| 316 | }; |
| 317 | codec2aif-pins { |
| 318 | output-enable; |
| 319 | groups = "codec-aif3"; |
| 320 | function = "gf-aif1"; |
| 321 | }; |
| 322 | }; |
| 323 | }; |
| 324 | |
| 325 | lochnagar-sc { |
| 326 | compatible = "cirrus,lochnagar2-soundcard"; |
| 327 | |
| 328 | #sound-dai-cells = <1>; |
| 329 | |
| 330 | clocks = <&lochnagarclk LOCHNAGAR_SOUNDCARD_MCLK>; |
| 331 | clock-names = "mclk"; |
| 332 | }; |
| 333 | |
| 334 | lochnagar-hwmon { |
| 335 | compatible = "cirrus,lochnagar2-hwmon"; |
| 336 | }; |
| 337 | |
| 338 | MIC1VDD { |
| 339 | compatible = "cirrus,lochnagar2-mic1vdd"; |
| 340 | |
| 341 | cirrus,micbias-input = <3>; |
| 342 | }; |
| 343 | |
| 344 | MICVDD { |
| 345 | compatible = "cirrus,lochnagar2-micvdd"; |
| 346 | |
| 347 | SYSVDD-supply = <&wallvdd>; |
| 348 | |
| 349 | regulator-min-microvolt = <3300000>; |
| 350 | regulator-max-microvolt = <3300000>; |
| 351 | }; |
| 352 | |
| 353 | VDD1V8 { |
| 354 | compatible = "regulator-fixed"; |
| 355 | |
| 356 | regulator-name = "VDD1V8"; |
| 357 | regulator-min-microvolt = <1800000>; |
| 358 | regulator-max-microvolt = <1800000>; |
| 359 | regulator-boot-on; |
| 360 | regulator-always-on; |
| 361 | |
| 362 | vin-supply = <&wallvdd>; |
| 363 | }; |
| 364 | }; |
| 365 | }; |