| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| 2 | %YAML 1.2 |
| 3 | --- |
| 4 | $id: http://devicetree.org/schemas/leds/richtek,rt8515.yaml# |
| 5 | $schema: http://devicetree.org/meta-schemas/core.yaml# |
| 6 | |
| 7 | title: Richtek RT8515 1.5A dual channel LED driver |
| 8 | |
| 9 | maintainers: |
| 10 | - Linus Walleij <linus.walleij@linaro.org> |
| 11 | |
| 12 | description: | |
| 13 | The Richtek RT8515 is a dual channel (two mode) LED driver that |
| 14 | supports driving a white LED in flash or torch mode. The maximum |
| 15 | current for each mode is defined in hardware using two resistors |
| 16 | RFS and RTS. |
| 17 | |
| 18 | properties: |
| 19 | compatible: |
| 20 | const: richtek,rt8515 |
| 21 | |
| 22 | enf-gpios: |
| 23 | maxItems: 1 |
| 24 | description: A connection to the 'ENF' (enable flash) pin. |
| 25 | |
| 26 | ent-gpios: |
| 27 | maxItems: 1 |
| 28 | description: A connection to the 'ENT' (enable torch) pin. |
| 29 | |
| 30 | richtek,rfs-ohms: |
| 31 | minimum: 7680 |
| 32 | maximum: 367000 |
| 33 | description: The resistance value of the RFS resistor. This |
| 34 | resistors limits the maximum flash current. This must be set |
| 35 | for the property flash-max-microamp to work, the RFS resistor |
| 36 | defines the range of the dimmer setting (brightness) of the |
| 37 | flash LED. |
| 38 | |
| 39 | richtek,rts-ohms: |
| 40 | minimum: 7680 |
| 41 | maximum: 367000 |
| 42 | description: The resistance value of the RTS resistor. This |
| 43 | resistors limits the maximum torch current. This must be set |
| 44 | for the property torch-max-microamp to work, the RTS resistor |
| 45 | defines the range of the dimmer setting (brightness) of the |
| 46 | torch LED. |
| 47 | |
| 48 | led: |
| 49 | type: object |
| 50 | $ref: common.yaml# |
| 51 | properties: |
| 52 | function: true |
| 53 | color: true |
| 54 | flash-max-timeout-us: true |
| 55 | |
| 56 | flash-max-microamp: |
| 57 | maximum: 700000 |
| 58 | description: The maximum current for flash mode |
| 59 | is hardwired to the component using the RFS resistor to |
| 60 | ground. The maximum hardware current setting is calculated |
| 61 | according to the formula Imax = 5500 / RFS. The lowest |
| 62 | allowed resistance value is 7.86 kOhm giving an absolute |
| 63 | maximum current of 700mA. By setting this attribute in |
| 64 | the device tree, you can further restrict the maximum |
| 65 | current below the hardware limit. This requires the RFS |
| 66 | to be defined as it defines the maximum range. |
| 67 | |
| 68 | led-max-microamp: |
| 69 | maximum: 700000 |
| 70 | description: The maximum current for torch mode |
| 71 | is hardwired to the component using the RTS resistor to |
| 72 | ground. The maximum hardware current setting is calculated |
| 73 | according to the formula Imax = 5500 / RTS. The lowest |
| 74 | allowed resistance value is 7.86 kOhm giving an absolute |
| 75 | maximum current of 700mA. By setting this attribute in |
| 76 | the device tree, you can further restrict the maximum |
| 77 | current below the hardware limit. This requires the RTS |
| 78 | to be defined as it defines the maximum range. |
| 79 | |
| 80 | additionalProperties: false |
| 81 | |
| 82 | required: |
| 83 | - compatible |
| 84 | - ent-gpios |
| 85 | - enf-gpios |
| 86 | - led |
| 87 | |
| 88 | additionalProperties: false |
| 89 | |
| 90 | examples: |
| 91 | - | |
| 92 | #include <dt-bindings/gpio/gpio.h> |
| 93 | #include <dt-bindings/leds/common.h> |
| 94 | |
| 95 | led-controller { |
| 96 | compatible = "richtek,rt8515"; |
| 97 | enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; |
| 98 | ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; |
| 99 | richtek,rfs-ohms = <16000>; |
| 100 | richtek,rts-ohms = <100000>; |
| 101 | |
| 102 | led { |
| 103 | function = LED_FUNCTION_FLASH; |
| 104 | color = <LED_COLOR_ID_WHITE>; |
| 105 | flash-max-timeout-us = <250000>; |
| 106 | flash-max-microamp = <150000>; |
| 107 | led-max-microamp = <25000>; |
| 108 | }; |
| 109 | }; |
| 110 | |
| 111 | ... |