| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame^] | 1 | |
| 2 | * Marvell ODMI for MSI support |
| 3 | |
| 4 | Some Marvell SoCs have an On-Die Message Interrupt (ODMI) controller |
| 5 | which can be used by on-board peripheral for MSI interrupts. |
| 6 | |
| 7 | Required properties: |
| 8 | |
| 9 | - compatible : The value here should contain: |
| 10 | |
| 11 | "marvell,ap806-odmi-controller", "marvell,odmi-controller". |
| 12 | |
| 13 | - interrupt,controller : Identifies the node as an interrupt controller. |
| 14 | |
| 15 | - msi-controller : Identifies the node as an MSI controller. |
| 16 | |
| 17 | - marvell,odmi-frames : Number of ODMI frames available. Each frame |
| 18 | provides a number of events. |
| 19 | |
| 20 | - reg : List of register definitions, one for each |
| 21 | ODMI frame. |
| 22 | |
| 23 | - marvell,spi-base : List of GIC base SPI interrupts, one for each |
| 24 | ODMI frame. Those SPI interrupts are 0-based, |
| 25 | i.e marvell,spi-base = <128> will use SPI #96. |
| 26 | See Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml |
| 27 | for details about the GIC Device Tree binding. |
| 28 | |
| 29 | Example: |
| 30 | |
| 31 | odmi: odmi@300000 { |
| 32 | compatible = "marvell,ap806-odmi-controller", |
| 33 | "marvell,odmi-controller"; |
| 34 | interrupt-controller; |
| 35 | msi-controller; |
| 36 | marvell,odmi-frames = <4>; |
| 37 | reg = <0x300000 0x4000>, |
| 38 | <0x304000 0x4000>, |
| 39 | <0x308000 0x4000>, |
| 40 | <0x30C000 0x4000>; |
| 41 | marvell,spi-base = <128>, <136>, <144>, <152>; |
| 42 | }; |