blob: dff9ac0a4d6f4dfbd58c3837fbddcbcb0bc29bd6 [file] [log] [blame]
Tom Rini10e47792018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Jimmy Zhang5983ef82012-04-02 13:18:52 +00002/*
3 * Copyright (c) 2011 The Chromium OS Authors.
Jimmy Zhang5983ef82012-04-02 13:18:52 +00004 */
5
6#include <common.h>
7#include <fdtdec.h>
8#include <asm/io.h>
Tom Warrenab371962012-09-19 15:50:56 -07009#include <asm/arch-tegra/ap.h>
Stephen Warrenfdb906f2014-03-21 12:28:53 -060010#include <asm/arch-tegra/apb_misc.h>
Jimmy Zhang5983ef82012-04-02 13:18:52 +000011#include <asm/arch/clock.h>
12#include <asm/arch/emc.h>
Tom Warrenab371962012-09-19 15:50:56 -070013#include <asm/arch/tegra.h>
Jimmy Zhang5983ef82012-04-02 13:18:52 +000014
15/*
16 * The EMC registers have shadow registers. When the EMC clock is updated
17 * in the clock controller, the shadow registers are copied to the active
18 * registers, allowing glitchless memory bus frequency changes.
19 * This function updates the shadow registers for a new clock frequency,
20 * and relies on the clock lock on the emc clock to avoid races between
21 * multiple frequency changes
22 */
23
24/*
25 * This table defines the ordering of the registers provided to
26 * tegra_set_mmc()
27 * TODO: Convert to fdt version once available
28 */
29static const unsigned long emc_reg_addr[TEGRA_EMC_NUM_REGS] = {
30 0x2c, /* RC */
31 0x30, /* RFC */
32 0x34, /* RAS */
33 0x38, /* RP */
34 0x3c, /* R2W */
35 0x40, /* W2R */
36 0x44, /* R2P */
37 0x48, /* W2P */
38 0x4c, /* RD_RCD */
39 0x50, /* WR_RCD */
40 0x54, /* RRD */
41 0x58, /* REXT */
42 0x5c, /* WDV */
43 0x60, /* QUSE */
44 0x64, /* QRST */
45 0x68, /* QSAFE */
46 0x6c, /* RDV */
47 0x70, /* REFRESH */
48 0x74, /* BURST_REFRESH_NUM */
49 0x78, /* PDEX2WR */
50 0x7c, /* PDEX2RD */
51 0x80, /* PCHG2PDEN */
52 0x84, /* ACT2PDEN */
53 0x88, /* AR2PDEN */
54 0x8c, /* RW2PDEN */
55 0x90, /* TXSR */
56 0x94, /* TCKE */
57 0x98, /* TFAW */
58 0x9c, /* TRPAB */
59 0xa0, /* TCLKSTABLE */
60 0xa4, /* TCLKSTOP */
61 0xa8, /* TREFBW */
62 0xac, /* QUSE_EXTRA */
63 0x114, /* FBIO_CFG6 */
64 0xb0, /* ODT_WRITE */
65 0xb4, /* ODT_READ */
66 0x104, /* FBIO_CFG5 */
67 0x2bc, /* CFG_DIG_DLL */
68 0x2c0, /* DLL_XFORM_DQS */
69 0x2c4, /* DLL_XFORM_QUSE */
70 0x2e0, /* ZCAL_REF_CNT */
71 0x2e4, /* ZCAL_WAIT_CNT */
72 0x2a8, /* AUTO_CAL_INTERVAL */
73 0x2d0, /* CFG_CLKTRIM_0 */
74 0x2d4, /* CFG_CLKTRIM_1 */
75 0x2d8, /* CFG_CLKTRIM_2 */
76};
77
78struct emc_ctlr *emc_get_controller(const void *blob)
79{
80 fdt_addr_t addr;
81 int node;
82
83 node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA20_EMC);
84 if (node > 0) {
85 addr = fdtdec_get_addr(blob, node, "reg");
86 if (addr != FDT_ADDR_T_NONE)
87 return (struct emc_ctlr *)addr;
88 }
89 return NULL;
90}
91
92/* Error codes we use */
93enum {
94 ERR_NO_EMC_NODE = -10,
95 ERR_NO_EMC_REG,
96 ERR_NO_FREQ,
97 ERR_FREQ_NOT_FOUND,
98 ERR_BAD_REGS,
99 ERR_NO_RAM_CODE,
100 ERR_RAM_CODE_NOT_FOUND,
101};
102
103/**
104 * Find EMC tables for the given ram code.
105 *
106 * The tegra EMC binding has two options, one using the ram code and one not.
107 * We detect which is in use by looking for the nvidia,use-ram-code property.
108 * If this is not present, then the EMC tables are directly below 'node',
109 * otherwise we select the correct emc-tables subnode based on the 'ram_code'
110 * value.
111 *
112 * @param blob Device tree blob
113 * @param node EMC node (nvidia,tegra20-emc compatible string)
114 * @param ram_code RAM code to select (0-3, or -1 if unknown)
115 * @return 0 if ok, otherwise a -ve ERR_ code (see enum above)
116 */
117static int find_emc_tables(const void *blob, int node, int ram_code)
118{
119 int need_ram_code;
120 int depth;
121 int offset;
122
123 /* If we are using RAM codes, scan through the tables for our code */
124 need_ram_code = fdtdec_get_bool(blob, node, "nvidia,use-ram-code");
125 if (!need_ram_code)
126 return node;
127 if (ram_code == -1) {
128 debug("%s: RAM code required but not supplied\n", __func__);
129 return ERR_NO_RAM_CODE;
130 }
131
132 offset = node;
133 depth = 0;
134 do {
135 /*
136 * Sadly there is no compatible string so we cannot use
137 * fdtdec_next_compatible_subnode().
138 */
139 offset = fdt_next_node(blob, offset, &depth);
140 if (depth <= 0)
141 break;
142
143 /* Make sure this is a direct subnode */
144 if (depth != 1)
145 continue;
146 if (strcmp("emc-tables", fdt_get_name(blob, offset, NULL)))
147 continue;
148
149 if (fdtdec_get_int(blob, offset, "nvidia,ram-code", -1)
150 == ram_code)
151 return offset;
152 } while (1);
153
154 debug("%s: Could not find tables for RAM code %d\n", __func__,
155 ram_code);
156 return ERR_RAM_CODE_NOT_FOUND;
157}
158
159/**
160 * Decode the EMC node of the device tree, returning a pointer to the emc
161 * controller and the table to be used for the given rate.
162 *
163 * @param blob Device tree blob
164 * @param rate Clock speed of memory controller in Hz (=2x memory bus rate)
165 * @param emcp Returns address of EMC controller registers
166 * @param tablep Returns pointer to table to program into EMC. There are
167 * TEGRA_EMC_NUM_REGS entries, destined for offsets as per the
168 * emc_reg_addr array.
169 * @return 0 if ok, otherwise a -ve error code which will allow someone to
170 * figure out roughly what went wrong by looking at this code.
171 */
172static int decode_emc(const void *blob, unsigned rate, struct emc_ctlr **emcp,
173 const u32 **tablep)
174{
175 struct apb_misc_pp_ctlr *pp =
176 (struct apb_misc_pp_ctlr *)NV_PA_APB_MISC_BASE;
177 int ram_code;
178 int depth;
179 int node;
180
181 ram_code = (readl(&pp->strapping_opt_a) & RAM_CODE_MASK)
182 >> RAM_CODE_SHIFT;
183 /*
184 * The EMC clock rate is twice the bus rate, and the bus rate is
185 * measured in kHz
186 */
187 rate = rate / 2 / 1000;
188
189 node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA20_EMC);
190 if (node < 0) {
191 debug("%s: No EMC node found in FDT\n", __func__);
192 return ERR_NO_EMC_NODE;
193 }
194 *emcp = (struct emc_ctlr *)fdtdec_get_addr(blob, node, "reg");
195 if (*emcp == (struct emc_ctlr *)FDT_ADDR_T_NONE) {
196 debug("%s: No EMC node reg property\n", __func__);
197 return ERR_NO_EMC_REG;
198 }
199
200 /* Work out the parent node which contains our EMC tables */
201 node = find_emc_tables(blob, node, ram_code & 3);
202 if (node < 0)
203 return node;
204
205 depth = 0;
206 for (;;) {
207 int node_rate;
208
209 node = fdtdec_next_compatible_subnode(blob, node,
210 COMPAT_NVIDIA_TEGRA20_EMC_TABLE, &depth);
211 if (node < 0)
212 break;
213 node_rate = fdtdec_get_int(blob, node, "clock-frequency", -1);
214 if (node_rate == -1) {
215 debug("%s: Missing clock-frequency\n", __func__);
216 return ERR_NO_FREQ; /* we expect this property */
217 }
218
219 if (node_rate == rate)
220 break;
221 }
222 if (node < 0) {
223 debug("%s: No node found for clock frequency %d\n", __func__,
224 rate);
225 return ERR_FREQ_NOT_FOUND;
226 }
227
228 *tablep = fdtdec_locate_array(blob, node, "nvidia,emc-registers",
229 TEGRA_EMC_NUM_REGS);
230 if (!*tablep) {
231 debug("%s: node '%s' array missing / wrong size\n", __func__,
232 fdt_get_name(blob, node, NULL));
233 return ERR_BAD_REGS;
234 }
235
236 /* All seems well */
237 return 0;
238}
239
240int tegra_set_emc(const void *blob, unsigned rate)
241{
242 struct emc_ctlr *emc;
Allen Martinec356ed2012-10-19 21:18:03 +0000243 const u32 *table = NULL;
Jimmy Zhang5983ef82012-04-02 13:18:52 +0000244 int err, i;
245
246 err = decode_emc(blob, rate, &emc, &table);
247 if (err) {
248 debug("Warning: no valid EMC (%d), memory timings unset\n",
249 err);
250 return err;
251 }
252
253 debug("%s: Table found, setting EMC values as follows:\n", __func__);
254 for (i = 0; i < TEGRA_EMC_NUM_REGS; i++) {
255 u32 value = fdt32_to_cpu(table[i]);
256 u32 addr = (uintptr_t)emc + emc_reg_addr[i];
257
258 debug(" %#x: %#x\n", addr, value);
259 writel(value, addr);
260 }
261
262 /* trigger emc with new settings */
263 clock_adjust_periph_pll_div(PERIPH_ID_EMC, CLOCK_ID_MEMORY,
264 clock_get_rate(CLOCK_ID_MEMORY), NULL);
265 debug("EMC clock set to %lu\n",
266 clock_get_periph_rate(PERIPH_ID_EMC, CLOCK_ID_MEMORY));
267
268 return 0;
269}