doc/device-tree-bindings/sysinfo/gdsys,sysinfo_gazerbeam.txt

gdsys Gazerbeam sysinfo driver

This driver provides capabilities to access the gdsys Gazerbeam board's device
information. Furthermore, phandles to some internal devices are provided for
the board files.

Required properties:
- compatible:  should be "gdsys,sysinfo-gazerbeam"
- csb:         phandle to the board's coherent system bus (CSB) device node
- rxaui[0-3]:  phandles to the rxaui control device nodes
- fpga[0-1]:   phandles to the board's gdsys FPGA device nodes
- ioep[0-1]:   phandles to the board's IO endpoint device nodes
- ver-gpios:   GPIO list to read the hardware version from
- var-gpios:   GPIO list to read the hardware variant information from
- reset-gpios: GPIO list for the board's reset GPIOs

Example:


sysinfo {
	compatible = "gdsys,sysinfo-gazerbeam";
	csb = <&board_soc>;
	serdes = <&SERDES>;
	rxaui0 = <&RXAUI0>;
	rxaui1 = <&RXAUI1>;
	rxaui2 = <&RXAUI2>;
	rxaui3 = <&RXAUI3>;
	fpga0 = <&FPGA0>;
	fpga1 = <&FPGA1>;
	ioep0 = <&IOEP0>;
	ioep1 = <&IOEP1>;

	ver-gpios = <&PPCPCA 12 0
		     &PPCPCA 13 0
		     &PPCPCA 14 0
		     &PPCPCA 15 0>;

	/* MC2/SC-Board */
	var-gpios-mc2 = <&GPIO_VB0 0 0    /* VAR-MC_SC */
			 &GPIO_VB0 11 0>; /* VAR-CON */
	/* MC4-Board */
	var-gpios-mc4 = <&GPIO_VB1 0 0    /* VAR-MC_SC */
			 &GPIO_VB1 11 0>; /* VAR-CON */

	reset-gpios = <&gpio0 1 0 &gpio0 2 1>;
};