Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 5059914b3b1f2e2cc4febef5e1e8ce6a8cd9c9d8 / . / arch / arm / dts / stm32mp157c.dtsi
blob: 8df9f09dc6c3914e6abfe8e8d1cae241a791011f [file] [log] [blame]
Patrick Delaunay50599142018-07-09 15:17:19 +0200[diff] [blame^]1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2/*
3 * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
4 * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
5 */
6#include <dt-bindings/interrupt-controller/arm-gic.h>
7#include <dt-bindings/clock/stm32mp1-clks.h>
8#include <dt-bindings/reset/stm32mp1-resets.h>
9
10/ {
11 #address-cells = <1>;
12 #size-cells = <1>;
13
14 cpus {
15 #address-cells = <1>;
16 #size-cells = <0>;
17
18 cpu0: cpu@0 {
19 compatible = "arm,cortex-a7";
20 device_type = "cpu";
21 reg = <0>;
22 };
23
24 cpu1: cpu@1 {
25 compatible = "arm,cortex-a7";
26 device_type = "cpu";
27 reg = <1>;
28 };
29 };
30
31 psci {
32 compatible = "arm,psci";
33 method = "smc";
34 cpu_off = <0x84000002>;
35 cpu_on = <0x84000003>;
36 };
37
38 aliases {
39 gpio0 = &gpioa;
40 gpio1 = &gpiob;
41 gpio2 = &gpioc;
42 gpio3 = &gpiod;
43 gpio4 = &gpioe;
44 gpio5 = &gpiof;
45 gpio6 = &gpiog;
46 gpio7 = &gpioh;
47 gpio8 = &gpioi;
48 gpio9 = &gpioj;
49 gpio10 = &gpiok;
50 serial0 = &usart1;
51 serial1 = &usart2;
52 serial2 = &usart3;
53 serial3 = &uart4;
54 serial4 = &uart5;
55 serial5 = &usart6;
56 serial6 = &uart7;
57 serial7 = &uart8;
58 };
59
60 intc: interrupt-controller@a0021000 {
61 compatible = "arm,cortex-a7-gic";
62 #interrupt-cells = <3>;
63 interrupt-controller;
64 reg = <0xa0021000 0x1000>,
65 <0xa0022000 0x2000>;
66 };
67
68 timer {
69 compatible = "arm,armv7-timer";
70 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
71 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
72 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
73 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
74 interrupt-parent = <&intc>;
75 };
76
77 clocks {
78 clk_hse: clk-hse {
79 #clock-cells = <0>;
80 compatible = "fixed-clock";
81 clock-frequency = <24000000>;
82 };
83
84 clk_hsi: clk-hsi {
85 #clock-cells = <0>;
86 compatible = "fixed-clock";
87 clock-frequency = <64000000>;
88 };
89
90 clk_lse: clk-lse {
91 #clock-cells = <0>;
92 compatible = "fixed-clock";
93 clock-frequency = <32768>;
94 };
95
96 clk_lsi: clk-lsi {
97 #clock-cells = <0>;
98 compatible = "fixed-clock";
99 clock-frequency = <32000>;
100 };
101
102 clk_csi: clk-csi {
103 #clock-cells = <0>;
104 compatible = "fixed-clock";
105 clock-frequency = <4000000>;
106 };
107 };
108
109 soc {
110 compatible = "simple-bus";
111 #address-cells = <1>;
112 #size-cells = <1>;
113 interrupt-parent = <&intc>;
114 ranges;
115
116 timers2: timer@40000000 {
117 #address-cells = <1>;
118 #size-cells = <0>;
119 compatible = "st,stm32-timers";
120 reg = <0x40000000 0x400>;
121 clocks = <&rcc TIM2_K>;
122 clock-names = "int";
123 status = "disabled";
124
125 pwm {
126 compatible = "st,stm32-pwm";
127 status = "disabled";
128 };
129
130 timer@1 {
131 compatible = "st,stm32h7-timer-trigger";
132 reg = <1>;
133 status = "disabled";
134 };
135 };
136
137 timers3: timer@40001000 {
138 #address-cells = <1>;
139 #size-cells = <0>;
140 compatible = "st,stm32-timers";
141 reg = <0x40001000 0x400>;
142 clocks = <&rcc TIM3_K>;
143 clock-names = "int";
144 status = "disabled";
145
146 pwm {
147 compatible = "st,stm32-pwm";
148 status = "disabled";
149 };
150
151 timer@2 {
152 compatible = "st,stm32h7-timer-trigger";
153 reg = <2>;
154 status = "disabled";
155 };
156 };
157
158 timers4: timer@40002000 {
159 #address-cells = <1>;
160 #size-cells = <0>;
161 compatible = "st,stm32-timers";
162 reg = <0x40002000 0x400>;
163 clocks = <&rcc TIM4_K>;
164 clock-names = "int";
165 status = "disabled";
166
167 pwm {
168 compatible = "st,stm32-pwm";
169 status = "disabled";
170 };
171
172 timer@3 {
173 compatible = "st,stm32h7-timer-trigger";
174 reg = <3>;
175 status = "disabled";
176 };
177 };
178
179 timers5: timer@40003000 {
180 #address-cells = <1>;
181 #size-cells = <0>;
182 compatible = "st,stm32-timers";
183 reg = <0x40003000 0x400>;
184 clocks = <&rcc TIM5_K>;
185 clock-names = "int";
186 status = "disabled";
187
188 pwm {
189 compatible = "st,stm32-pwm";
190 status = "disabled";
191 };
192
193 timer@4 {
194 compatible = "st,stm32h7-timer-trigger";
195 reg = <4>;
196 status = "disabled";
197 };
198 };
199
200 timers6: timer@40004000 {
201 #address-cells = <1>;
202 #size-cells = <0>;
203 compatible = "st,stm32-timers";
204 reg = <0x40004000 0x400>;
205 clocks = <&rcc TIM6_K>;
206 clock-names = "int";
207 status = "disabled";
208
209 timer@5 {
210 compatible = "st,stm32h7-timer-trigger";
211 reg = <5>;
212 status = "disabled";
213 };
214 };
215
216 timers7: timer@40005000 {
217 #address-cells = <1>;
218 #size-cells = <0>;
219 compatible = "st,stm32-timers";
220 reg = <0x40005000 0x400>;
221 clocks = <&rcc TIM7_K>;
222 clock-names = "int";
223 status = "disabled";
224
225 timer@6 {
226 compatible = "st,stm32h7-timer-trigger";
227 reg = <6>;
228 status = "disabled";
229 };
230 };
231
232 timers12: timer@40006000 {
233 #address-cells = <1>;
234 #size-cells = <0>;
235 compatible = "st,stm32-timers";
236 reg = <0x40006000 0x400>;
237 clocks = <&rcc TIM12_K>;
238 clock-names = "int";
239 status = "disabled";
240
241 pwm {
242 compatible = "st,stm32-pwm";
243 status = "disabled";
244 };
245
246 timer@11 {
247 compatible = "st,stm32h7-timer-trigger";
248 reg = <11>;
249 status = "disabled";
250 };
251 };
252
253 timers13: timer@40007000 {
254 #address-cells = <1>;
255 #size-cells = <0>;
256 compatible = "st,stm32-timers";
257 reg = <0x40007000 0x400>;
258 clocks = <&rcc TIM13_K>;
259 clock-names = "int";
260 status = "disabled";
261
262 pwm {
263 compatible = "st,stm32-pwm";
264 status = "disabled";
265 };
266
267 timer@12 {
268 compatible = "st,stm32h7-timer-trigger";
269 reg = <12>;
270 status = "disabled";
271 };
272 };
273
274 timers14: timer@40008000 {
275 #address-cells = <1>;
276 #size-cells = <0>;
277 compatible = "st,stm32-timers";
278 reg = <0x40008000 0x400>;
279 clocks = <&rcc TIM14_K>;
280 clock-names = "int";
281 status = "disabled";
282
283 pwm {
284 compatible = "st,stm32-pwm";
285 status = "disabled";
286 };
287
288 timer@13 {
289 compatible = "st,stm32h7-timer-trigger";
290 reg = <13>;
291 status = "disabled";
292 };
293 };
294
295 lptimer1: timer@40009000 {
296 #address-cells = <1>;
297 #size-cells = <0>;
298 compatible = "st,stm32-lptimer";
299 reg = <0x40009000 0x400>;
300 clocks = <&rcc LPTIM1_K>;
301 clock-names = "mux";
302 status = "disabled";
303
304 pwm {
305 compatible = "st,stm32-pwm-lp";
306 #pwm-cells = <3>;
307 status = "disabled";
308 };
309
310 trigger@0 {
311 compatible = "st,stm32-lptimer-trigger";
312 reg = <0>;
313 status = "disabled";
314 };
315
316 counter {
317 compatible = "st,stm32-lptimer-counter";
318 status = "disabled";
319 };
320 };
321
322 usart2: serial@4000e000 {
323 compatible = "st,stm32h7-uart";
324 reg = <0x4000e000 0x400>;
325 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
326 clocks = <&rcc USART2_K>;
327 status = "disabled";
328 };
329
330 usart3: serial@4000f000 {
331 compatible = "st,stm32h7-uart";
332 reg = <0x4000f000 0x400>;
333 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
334 clocks = <&rcc USART3_K>;
335 status = "disabled";
336 };
337
338 uart4: serial@40010000 {
339 compatible = "st,stm32h7-uart";
340 reg = <0x40010000 0x400>;
341 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
342 clocks = <&rcc UART4_K>;
343 status = "disabled";
344 };
345
346 uart5: serial@40011000 {
347 compatible = "st,stm32h7-uart";
348 reg = <0x40011000 0x400>;
349 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
350 clocks = <&rcc UART5_K>;
351 status = "disabled";
352 };
353
354 i2c1: i2c@40012000 {
355 compatible = "st,stm32f7-i2c";
356 reg = <0x40012000 0x400>;
357 interrupt-names = "event", "error";
358 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
359 <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
360 clocks = <&rcc I2C1_K>;
361 resets = <&rcc I2C1_R>;
362 #address-cells = <1>;
363 #size-cells = <0>;
364 status = "disabled";
365 };
366
367 i2c2: i2c@40013000 {
368 compatible = "st,stm32f7-i2c";
369 reg = <0x40013000 0x400>;
370 interrupt-names = "event", "error";
371 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
372 <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
373 clocks = <&rcc I2C2_K>;
374 resets = <&rcc I2C2_R>;
375 #address-cells = <1>;
376 #size-cells = <0>;
377 status = "disabled";
378 };
379
380 i2c3: i2c@40014000 {
381 compatible = "st,stm32f7-i2c";
382 reg = <0x40014000 0x400>;
383 interrupt-names = "event", "error";
384 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
385 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
386 clocks = <&rcc I2C3_K>;
387 resets = <&rcc I2C3_R>;
388 #address-cells = <1>;
389 #size-cells = <0>;
390 status = "disabled";
391 };
392
393 i2c5: i2c@40015000 {
394 compatible = "st,stm32f7-i2c";
395 reg = <0x40015000 0x400>;
396 interrupt-names = "event", "error";
397 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
398 <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
399 clocks = <&rcc I2C5_K>;
400 resets = <&rcc I2C5_R>;
401 #address-cells = <1>;
402 #size-cells = <0>;
403 status = "disabled";
404 };
405
406 cec: cec@40016000 {
407 compatible = "st,stm32-cec";
408 reg = <0x40016000 0x400>;
409 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
410 clocks = <&rcc CEC_K>, <&clk_lse>;
411 clock-names = "cec", "hdmi-cec";
412 status = "disabled";
413 };
414
415 dac: dac@40017000 {
416 compatible = "st,stm32h7-dac-core";
417 reg = <0x40017000 0x400>;
418 clocks = <&rcc DAC12>;
419 clock-names = "pclk";
420 #address-cells = <1>;
421 #size-cells = <0>;
422 status = "disabled";
423
424 dac1: dac@1 {
425 compatible = "st,stm32-dac";
426 #io-channels-cells = <1>;
427 reg = <1>;
428 status = "disabled";
429 };
430
431 dac2: dac@2 {
432 compatible = "st,stm32-dac";
433 #io-channels-cells = <1>;
434 reg = <2>;
435 status = "disabled";
436 };
437 };
438
439 uart7: serial@40018000 {
440 compatible = "st,stm32h7-uart";
441 reg = <0x40018000 0x400>;
442 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
443 clocks = <&rcc UART7_K>;
444 status = "disabled";
445 };
446
447 uart8: serial@40019000 {
448 compatible = "st,stm32h7-uart";
449 reg = <0x40019000 0x400>;
450 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
451 clocks = <&rcc UART8_K>;
452 status = "disabled";
453 };
454
455 timers1: timer@44000000 {
456 #address-cells = <1>;
457 #size-cells = <0>;
458 compatible = "st,stm32-timers";
459 reg = <0x44000000 0x400>;
460 clocks = <&rcc TIM1_K>;
461 clock-names = "int";
462 status = "disabled";
463
464 pwm {
465 compatible = "st,stm32-pwm";
466 status = "disabled";
467 };
468
469 timer@0 {
470 compatible = "st,stm32h7-timer-trigger";
471 reg = <0>;
472 status = "disabled";
473 };
474 };
475
476 timers8: timer@44001000 {
477 #address-cells = <1>;
478 #size-cells = <0>;
479 compatible = "st,stm32-timers";
480 reg = <0x44001000 0x400>;
481 clocks = <&rcc TIM8_K>;
482 clock-names = "int";
483 status = "disabled";
484
485 pwm {
486 compatible = "st,stm32-pwm";
487 status = "disabled";
488 };
489
490 timer@7 {
491 compatible = "st,stm32h7-timer-trigger";
492 reg = <7>;
493 status = "disabled";
494 };
495 };
496
497 usart6: serial@44003000 {
498 compatible = "st,stm32h7-uart";
499 reg = <0x44003000 0x400>;
500 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
501 clocks = <&rcc USART6_K>;
502 status = "disabled";
503 };
504
505 timers15: timer@44006000 {
506 #address-cells = <1>;
507 #size-cells = <0>;
508 compatible = "st,stm32-timers";
509 reg = <0x44006000 0x400>;
510 clocks = <&rcc TIM15_K>;
511 clock-names = "int";
512 status = "disabled";
513
514 pwm {
515 compatible = "st,stm32-pwm";
516 status = "disabled";
517 };
518
519 timer@14 {
520 compatible = "st,stm32h7-timer-trigger";
521 reg = <14>;
522 status = "disabled";
523 };
524 };
525
526 timers16: timer@44007000 {
527 #address-cells = <1>;
528 #size-cells = <0>;
529 compatible = "st,stm32-timers";
530 reg = <0x44007000 0x400>;
531 clocks = <&rcc TIM16_K>;
532 clock-names = "int";
533 status = "disabled";
534
535 pwm {
536 compatible = "st,stm32-pwm";
537 status = "disabled";
538 };
539 timer@15 {
540 compatible = "st,stm32h7-timer-trigger";
541 reg = <15>;
542 status = "disabled";
543 };
544 };
545
546 timers17: timer@44008000 {
547 #address-cells = <1>;
548 #size-cells = <0>;
549 compatible = "st,stm32-timers";
550 reg = <0x44008000 0x400>;
551 clocks = <&rcc TIM17_K>;
552 clock-names = "int";
553 status = "disabled";
554
555 pwm {
556 compatible = "st,stm32-pwm";
557 status = "disabled";
558 };
559
560 timer@16 {
561 compatible = "st,stm32h7-timer-trigger";
562 reg = <16>;
563 status = "disabled";
564 };
565 };
566
567 dma1: dma@48000000 {
568 compatible = "st,stm32-dma";
569 reg = <0x48000000 0x400>;
570 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
571 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
572 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
573 <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
574 <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
575 <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
576 <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
577 <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
578 clocks = <&rcc DMA1>;
579 #dma-cells = <4>;
580 st,mem2mem;
581 dma-requests = <8>;
582 };
583
584 dma2: dma@48001000 {
585 compatible = "st,stm32-dma";
586 reg = <0x48001000 0x400>;
587 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
588 <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
589 <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
590 <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
591 <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
592 <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
593 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
594 <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
595 clocks = <&rcc DMA2>;
596 #dma-cells = <4>;
597 st,mem2mem;
598 dma-requests = <8>;
599 };
600
601 dmamux1: dma-router@48002000 {
602 compatible = "st,stm32h7-dmamux";
603 reg = <0x48002000 0x1c>;
604 #dma-cells = <3>;
605 dma-requests = <128>;
606 dma-masters = <&dma1 &dma2>;
607 dma-channels = <16>;
608 clocks = <&rcc DMAMUX>;
609 };
610
611 sdmmc3: sdmmc@48004000 {
612 compatible = "st,stm32-sdmmc2";
613 reg = <0x48004000 0x400>, <0x48005000 0x400>;
614 reg-names = "sdmmc", "delay";
615 interrupts = <GIC_SPI 137 IRQ_TYPE_NONE>;
616 clocks = <&rcc SDMMC3_K>;
617 resets = <&rcc SDMMC3_R>;
618 st,idma = <1>;
619 cap-sd-highspeed;
620 cap-mmc-highspeed;
621 max-frequency = <120000000>;
622 status = "disabled";
623 };
624
625 rcc: rcc@50000000 {
626 compatible = "st,stm32mp1-rcc", "syscon";
627 reg = <0x50000000 0x1000>;
628 #clock-cells = <1>;
629 #reset-cells = <1>;
630 };
631
632 rcc_reboot: rcc-reboot@50000000 {
633 compatible = "syscon-reboot";
634 regmap = <&rcc>;
635 offset = <0x404>;
636 mask = <0x1>;
637 };
638
639 pwr: pwr@50001000 {
640 compatible = "st,stm32mp1-pwr", "st,stm32-pwr", "syscon", "simple-mfd";
641 reg = <0x50001000 0x400>;
642 system-power-controller;
643 interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
644 st,sysrcc = <&rcc>;
645 clocks = <&rcc PLL2_R>;
646 clock-names = "phyclk";
647
648 pwr-regulators@c {
649 compatible = "st,stm32mp1,pwr-reg";
650 st,tzcr = <&rcc 0x0 0x1>;
651
652 reg11: reg11 {
653 regulator-name = "reg11";
654 regulator-min-microvolt = <1100000>;
655 regulator-max-microvolt = <1100000>;
656 };
657
658 reg18: reg18 {
659 regulator-name = "reg18";
660 regulator-min-microvolt = <1800000>;
661 regulator-max-microvolt = <1800000>;
662 };
663
664 usb33: usb33 {
665 regulator-name = "usb33";
666 regulator-min-microvolt = <3300000>;
667 regulator-max-microvolt = <3300000>;
668 };
669 };
670 };
671
672 exti: interrupt-controller@5000d000 {
673 compatible = "st,stm32mp1-exti", "syscon";
674 interrupt-controller;
675 #interrupt-cells = <2>;
676 reg = <0x5000d000 0x400>;
677 };
678
679 syscfg: system-config@50020000 {
680 compatible = "st,stm32-syscfg", "syscon";
681 reg = <0x50020000 0x400>;
682 };
683
684 lptimer2: timer@50021000 {
685 #address-cells = <1>;
686 #size-cells = <0>;
687 compatible = "st,stm32-lptimer";
688 reg = <0x50021000 0x400>;
689 clocks = <&rcc LPTIM2_K>;
690 clock-names = "mux";
691 status = "disabled";
692
693 pwm {
694 compatible = "st,stm32-pwm-lp";
695 #pwm-cells = <3>;
696 status = "disabled";
697 };
698
699 trigger@1 {
700 compatible = "st,stm32-lptimer-trigger";
701 reg = <1>;
702 status = "disabled";
703 };
704
705 counter {
706 compatible = "st,stm32-lptimer-counter";
707 status = "disabled";
708 };
709 };
710
711 lptimer3: timer@50022000 {
712 #address-cells = <1>;
713 #size-cells = <0>;
714 compatible = "st,stm32-lptimer";
715 reg = <0x50022000 0x400>;
716 clocks = <&rcc LPTIM3_K>;
717 clock-names = "mux";
718 status = "disabled";
719
720 pwm {
721 compatible = "st,stm32-pwm-lp";
722 #pwm-cells = <3>;
723 status = "disabled";
724 };
725
726 trigger@2 {
727 compatible = "st,stm32-lptimer-trigger";
728 reg = <2>;
729 status = "disabled";
730 };
731 };
732
733 lptimer4: timer@50023000 {
734 compatible = "st,stm32-lptimer";
735 reg = <0x50023000 0x400>;
736 clocks = <&rcc LPTIM4_K>;
737 clock-names = "mux";
738 status = "disabled";
739
740 pwm {
741 compatible = "st,stm32-pwm-lp";
742 #pwm-cells = <3>;
743 status = "disabled";
744 };
745 };
746
747 lptimer5: timer@50024000 {
748 compatible = "st,stm32-lptimer";
749 reg = <0x50024000 0x400>;
750 clocks = <&rcc LPTIM5_K>;
751 clock-names = "mux";
752 status = "disabled";
753
754 pwm {
755 compatible = "st,stm32-pwm-lp";
756 #pwm-cells = <3>;
757 status = "disabled";
758 };
759 };
760
761 vrefbuf: vrefbuf@50025000 {
762 compatible = "st,stm32-vrefbuf";
763 reg = <0x50025000 0x8>;
764 regulator-min-microvolt = <1500000>;
765 regulator-max-microvolt = <2500000>;
766 clocks = <&rcc VREF>;
767 status = "disabled";
768 };
769
770 cryp1: cryp@54001000 {
771 compatible = "st,stm32mp1-cryp";
772 reg = <0x54001000 0x400>;
773 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
774 clocks = <&rcc CRYP1>;
775 resets = <&rcc CRYP1_R>;
776 status = "disabled";
777 };
778
779 rng1: rng@54003000 {
780 compatible = "st,stm32-rng";
781 reg = <0x54003000 0x400>;
782 clocks = <&rcc RNG1_K>;
783 resets = <&rcc RNG1_R>;
784 status = "disabled";
785 };
786
787 mdma1: dma@58000000 {
788 compatible = "st,stm32h7-mdma";
789 reg = <0x58000000 0x1000>;
790 interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
791 clocks = <&rcc MDMA>;
792 #dma-cells = <5>;
793 dma-channels = <32>;
794 dma-requests = <48>;
795 };
796
797 qspi: qspi@58003000 {
798 compatible = "st,stm32f469-qspi";
799 reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
800 reg-names = "qspi", "qspi_mm";
801 interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
802 clocks = <&rcc QSPI_K>;
803 resets = <&rcc QSPI_R>;
804 status = "disabled";
805 };
806
807 sdmmc1: sdmmc@58005000 {
808 compatible = "st,stm32-sdmmc2";
809 reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
810 reg-names = "sdmmc", "delay";
811 clocks = <&rcc SDMMC1_K>;
812 resets = <&rcc SDMMC1_R>;
813 st,idma = <1>;
814 cap-sd-highspeed;
815 cap-mmc-highspeed;
816 max-frequency = <120000000>;
817 status = "disabled";
818 };
819
820 sdmmc2: sdmmc@58007000 {
821 compatible = "st,stm32-sdmmc2";
822 reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
823 reg-names = "sdmmc", "delay";
824 interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
825 clocks = <&rcc SDMMC2_K>;
826 resets = <&rcc SDMMC2_R>;
827 st,idma = <1>;
828 cap-sd-highspeed;
829 cap-mmc-highspeed;
830 max-frequency = <120000000>;
831 status = "disabled";
832 };
833
834 crc1: crc@58009000 {
835 compatible = "st,stm32f7-crc";
836 reg = <0x58009000 0x400>;
837 clocks = <&rcc CRC1>;
838 status = "disabled";
839 };
840
841 usbh_ohci: usbh-ohci@5800c000 {
842 compatible = "generic-ohci";
843 reg = <0x5800c000 0x1000>;
844 clocks = <&rcc USBH>;
845 resets = <&rcc USBH_R>;
846 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
847 status = "disabled";
848 };
849
850 usbh_ehci: usbh-ehci@5800d000 {
851 compatible = "generic-ehci";
852 reg = <0x5800d000 0x1000>;
853 clocks = <&rcc USBH>;
854 resets = <&rcc USBH_R>;
855 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
856 companion = <&usbh_ohci>;
857 status = "disabled";
858 };
859
860 dsi: dsi@5a000000 {
861 compatible = "st,stm32-dsi";
862 reg = <0x5a000000 0x800>;
863 clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
864 clock-names = "pclk", "ref", "px_clk";
865 resets = <&rcc DSI_R>;
866 reset-names = "apb";
867 status = "disabled";
868 };
869
870 ltdc: display-controller@5a001000 {
871 compatible = "st,stm32-ltdc";
872 reg = <0x5a001000 0x400>;
873 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
874 <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
875 clocks = <&rcc LTDC_PX>;
876 clock-names = "lcd";
877 resets = <&rcc LTDC_R>;
878 status = "disabled";
879 };
880
881 usbphyc: usbphyc@5a006000 {
882 #address-cells = <1>;
883 #size-cells = <0>;
884 compatible = "st,stm32mp1-usbphyc";
885 reg = <0x5a006000 0x1000>;
886 clocks = <&rcc USBPHY_K>;
887 resets = <&rcc USBPHY_R>;
888 status = "disabled";
889
890 usbphyc_port0: usb-phy@0 {
891 #phy-cells = <0>;
892 reg = <0>;
893 };
894
895 usbphyc_port1: usb-phy@1 {
896 #phy-cells = <1>;
897 reg = <1>;
898 };
899 };
900
901 usart1: serial@5c000000 {
902 compatible = "st,stm32h7-uart";
903 reg = <0x5c000000 0x400>;
904 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
905 clocks = <&rcc USART1_K>;
906 status = "disabled";
907 };
908
909 i2c4: i2c@5c002000 {
910 compatible = "st,stm32f7-i2c";
911 reg = <0x5c002000 0x400>;
912 interrupt-names = "event", "error";
913 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
914 <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
915 clocks = <&rcc I2C4_K>;
916 resets = <&rcc I2C4_R>;
917 #address-cells = <1>;
918 #size-cells = <0>;
919 status = "disabled";
920 };
921
922 i2c6: i2c@5c009000 {
923 compatible = "st,stm32f7-i2c";
924 reg = <0x5c009000 0x400>;
925 interrupt-names = "event", "error";
926 interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
927 <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
928 clocks = <&rcc I2C6_K>;
929 resets = <&rcc I2C6_R>;
930 #address-cells = <1>;
931 #size-cells = <0>;
932 status = "disabled";
933 };
934 };
935};