Gitiles
Code Review Sign In
git01.mediatek.com / filogic / uboot / 4e792ed22f9c75bff1d2349740dfb92ab9ff9df4 / . / dts / upstream / src / powerpc / mpc8379_rdb.dts
blob: a5f702304a353c61d6ab804765b817ec34a9582e [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -0500[diff] [blame]1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * MPC8379E RDB Device Tree Source
4 *
5 * Copyright 2007, 2008 Freescale Semiconductor Inc.
6 */
7
8/dts-v1/;
9
10/ {
11 compatible = "fsl,mpc8379rdb";
12 #address-cells = <1>;
13 #size-cells = <1>;
14
15 aliases {
16 ethernet0 = &enet0;
17 ethernet1 = &enet1;
18 serial0 = &serial0;
19 serial1 = &serial1;
20 pci0 = &pci0;
21 };
22
23 cpus {
24 #address-cells = <1>;
25 #size-cells = <0>;
26
27 PowerPC,8379@0 {
28 device_type = "cpu";
29 reg = <0x0>;
30 d-cache-line-size = <32>;
31 i-cache-line-size = <32>;
32 d-cache-size = <32768>;
33 i-cache-size = <32768>;
34 timebase-frequency = <0>;
35 bus-frequency = <0>;
36 clock-frequency = <0>;
37 };
38 };
39
40 memory {
41 device_type = "memory";
42 reg = <0x00000000 0x10000000>; // 256MB at 0
43 };
44
45 localbus@e0005000 {
46 #address-cells = <2>;
47 #size-cells = <1>;
48 compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
49 reg = <0xe0005000 0x1000>;
50 interrupts = <77 0x8>;
51 interrupt-parent = <&ipic>;
52
53 // CS0 and CS1 are swapped when
54 // booting from nand, but the
55 // addresses are the same.
56 ranges = <0x0 0x0 0xfe000000 0x00800000
57 0x1 0x0 0xe0600000 0x00008000
58 0x2 0x0 0xf0000000 0x00020000
59 0x3 0x0 0xfa000000 0x00008000>;
60
61 flash@0,0 {
62 #address-cells = <1>;
63 #size-cells = <1>;
64 compatible = "cfi-flash";
65 reg = <0x0 0x0 0x800000>;
66 bank-width = <2>;
67 device-width = <1>;
68 };
69
70 nand@1,0 {
71 #address-cells = <1>;
72 #size-cells = <1>;
73 compatible = "fsl,mpc8379-fcm-nand",
74 "fsl,elbc-fcm-nand";
75 reg = <0x1 0x0 0x8000>;
76
77 u-boot@0 {
78 reg = <0x0 0x100000>;
79 read-only;
80 };
81
82 kernel@100000 {
83 reg = <0x100000 0x300000>;
84 };
85 fs@400000 {
86 reg = <0x400000 0x1c00000>;
87 };
88 };
89 };
90
91 immr@e0000000 {
92 #address-cells = <1>;
93 #size-cells = <1>;
94 device_type = "soc";
95 compatible = "simple-bus";
96 ranges = <0x0 0xe0000000 0x00100000>;
97 reg = <0xe0000000 0x00000200>;
98 bus-frequency = <0>;
99
100 wdt@200 {
101 device_type = "watchdog";
102 compatible = "mpc83xx_wdt";
103 reg = <0x200 0x100>;
104 };
105
106 gpio1: gpio-controller@c00 {
107 #gpio-cells = <2>;
108 compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio";
109 reg = <0xc00 0x100>;
110 interrupts = <74 0x8>;
111 interrupt-parent = <&ipic>;
112 gpio-controller;
113 };
114
115 gpio2: gpio-controller@d00 {
116 #gpio-cells = <2>;
117 compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio";
118 reg = <0xd00 0x100>;
119 interrupts = <75 0x8>;
120 interrupt-parent = <&ipic>;
121 gpio-controller;
122 };
123
124 sleep-nexus {
125 #address-cells = <1>;
126 #size-cells = <1>;
127 compatible = "simple-bus";
128 sleep = <&pmc 0x0c000000>;
129 ranges;
130
131 i2c@3000 {
132 #address-cells = <1>;
133 #size-cells = <0>;
134 cell-index = <0>;
135 compatible = "fsl-i2c";
136 reg = <0x3000 0x100>;
137 interrupts = <14 0x8>;
138 interrupt-parent = <&ipic>;
139 dfsrr;
140
141 dtt@48 {
142 compatible = "national,lm75";
143 reg = <0x48>;
144 };
145
146 at24@50 {
147 compatible = "atmel,24c256";
148 reg = <0x50>;
149 };
150
151 rtc@68 {
152 compatible = "dallas,ds1339";
153 reg = <0x68>;
154 };
155
156 mcu_pio: mcu@a {
157 #gpio-cells = <2>;
158 compatible = "fsl,mc9s08qg8-mpc8379erdb",
159 "fsl,mcu-mpc8349emitx";
160 reg = <0x0a>;
161 gpio-controller;
162 };
163 };
164
165 sdhci@2e000 {
166 compatible = "fsl,mpc8379-esdhc", "fsl,esdhc";
167 reg = <0x2e000 0x1000>;
168 interrupts = <42 0x8>;
169 interrupt-parent = <&ipic>;
170 sdhci,wp-inverted;
171 /* Filled in by U-Boot */
172 clock-frequency = <111111111>;
173 };
174 };
175
176 i2c@3100 {
177 #address-cells = <1>;
178 #size-cells = <0>;
179 cell-index = <1>;
180 compatible = "fsl-i2c";
181 reg = <0x3100 0x100>;
182 interrupts = <15 0x8>;
183 interrupt-parent = <&ipic>;
184 dfsrr;
185 };
186
187 spi@7000 {
188 cell-index = <0>;
189 compatible = "fsl,spi";
190 reg = <0x7000 0x1000>;
191 interrupts = <16 0x8>;
192 interrupt-parent = <&ipic>;
193 mode = "cpu";
194 };
195
196 dma@82a8 {
197 #address-cells = <1>;
198 #size-cells = <1>;
199 compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
200 reg = <0x82a8 4>;
201 ranges = <0 0x8100 0x1a8>;
202 interrupt-parent = <&ipic>;
203 interrupts = <71 8>;
204 cell-index = <0>;
205 dma-channel@0 {
206 compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
207 reg = <0 0x80>;
208 cell-index = <0>;
209 interrupt-parent = <&ipic>;
210 interrupts = <71 8>;
211 };
212 dma-channel@80 {
213 compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
214 reg = <0x80 0x80>;
215 cell-index = <1>;
216 interrupt-parent = <&ipic>;
217 interrupts = <71 8>;
218 };
219 dma-channel@100 {
220 compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
221 reg = <0x100 0x80>;
222 cell-index = <2>;
223 interrupt-parent = <&ipic>;
224 interrupts = <71 8>;
225 };
226 dma-channel@180 {
227 compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
228 reg = <0x180 0x28>;
229 cell-index = <3>;
230 interrupt-parent = <&ipic>;
231 interrupts = <71 8>;
232 };
233 };
234
235 usb@23000 {
236 compatible = "fsl-usb2-dr";
237 reg = <0x23000 0x1000>;
238 #address-cells = <1>;
239 #size-cells = <0>;
240 interrupt-parent = <&ipic>;
241 interrupts = <38 0x8>;
242 phy_type = "ulpi";
243 sleep = <&pmc 0x00c00000>;
244 };
245
246 enet0: ethernet@24000 {
247 #address-cells = <1>;
248 #size-cells = <1>;
249 cell-index = <0>;
250 device_type = "network";
251 model = "eTSEC";
252 compatible = "gianfar";
253 reg = <0x24000 0x1000>;
254 ranges = <0x0 0x24000 0x1000>;
255 local-mac-address = [ 00 00 00 00 00 00 ];
256 interrupts = <32 0x8 33 0x8 34 0x8>;
257 phy-connection-type = "mii";
258 interrupt-parent = <&ipic>;
259 tbi-handle = <&tbi0>;
260 phy-handle = <&phy2>;
261 sleep = <&pmc 0xc0000000>;
262 fsl,magic-packet;
263
264 mdio@520 {
265 #address-cells = <1>;
266 #size-cells = <0>;
267 compatible = "fsl,gianfar-mdio";
268 reg = <0x520 0x20>;
269
270 phy2: ethernet-phy@2 {
271 interrupt-parent = <&ipic>;
272 interrupts = <17 0x8>;
273 reg = <0x2>;
274 };
275
276 tbi0: tbi-phy@11 {
277 reg = <0x11>;
278 device_type = "tbi-phy";
279 };
280 };
281 };
282
283 enet1: ethernet@25000 {
284 #address-cells = <1>;
285 #size-cells = <1>;
286 cell-index = <1>;
287 device_type = "network";
288 model = "eTSEC";
289 compatible = "gianfar";
290 reg = <0x25000 0x1000>;
291 ranges = <0x0 0x25000 0x1000>;
292 local-mac-address = [ 00 00 00 00 00 00 ];
293 interrupts = <35 0x8 36 0x8 37 0x8>;
294 phy-connection-type = "mii";
295 interrupt-parent = <&ipic>;
296 fixed-link = <1 1 1000 0 0>;
297 tbi-handle = <&tbi1>;
298 sleep = <&pmc 0x30000000>;
299 fsl,magic-packet;
300
301 mdio@520 {
302 #address-cells = <1>;
303 #size-cells = <0>;
304 compatible = "fsl,gianfar-tbi";
305 reg = <0x520 0x20>;
306
307 tbi1: tbi-phy@11 {
308 reg = <0x11>;
309 device_type = "tbi-phy";
310 };
311 };
312 };
313
314 serial0: serial@4500 {
315 cell-index = <0>;
316 device_type = "serial";
317 compatible = "fsl,ns16550", "ns16550";
318 reg = <0x4500 0x100>;
319 clock-frequency = <0>;
320 interrupts = <9 0x8>;
321 interrupt-parent = <&ipic>;
322 };
323
324 serial1: serial@4600 {
325 cell-index = <1>;
326 device_type = "serial";
327 compatible = "fsl,ns16550", "ns16550";
328 reg = <0x4600 0x100>;
329 clock-frequency = <0>;
330 interrupts = <10 0x8>;
331 interrupt-parent = <&ipic>;
332 };
333
334 crypto@30000 {
335 compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
336 "fsl,sec2.1", "fsl,sec2.0";
337 reg = <0x30000 0x10000>;
338 interrupts = <11 0x8>;
339 interrupt-parent = <&ipic>;
340 fsl,num-channels = <4>;
341 fsl,channel-fifo-len = <24>;
342 fsl,exec-units-mask = <0x9fe>;
343 fsl,descriptor-types-mask = <0x3ab0ebf>;
344 sleep = <&pmc 0x03000000>;
345 };
346
347 sata@18000 {
348 compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
349 reg = <0x18000 0x1000>;
350 interrupts = <44 0x8>;
351 interrupt-parent = <&ipic>;
352 sleep = <&pmc 0x000000c0>;
353 };
354
355 sata@19000 {
356 compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
357 reg = <0x19000 0x1000>;
358 interrupts = <45 0x8>;
359 interrupt-parent = <&ipic>;
360 sleep = <&pmc 0x00000030>;
361 };
362
363 sata@1a000 {
364 compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
365 reg = <0x1a000 0x1000>;
366 interrupts = <46 0x8>;
367 interrupt-parent = <&ipic>;
368 sleep = <&pmc 0x0000000c>;
369 };
370
371 sata@1b000 {
372 compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
373 reg = <0x1b000 0x1000>;
374 interrupts = <47 0x8>;
375 interrupt-parent = <&ipic>;
376 sleep = <&pmc 0x00000003>;
377 };
378
379 /* IPIC
380 * interrupts cell = <intr #, sense>
381 * sense values match linux IORESOURCE_IRQ_* defines:
382 * sense == 8: Level, low assertion
383 * sense == 2: Edge, high-to-low change
384 */
385 ipic: interrupt-controller@700 {
386 compatible = "fsl,ipic";
387 interrupt-controller;
388 #address-cells = <0>;
389 #interrupt-cells = <2>;
390 reg = <0x700 0x100>;
391 };
392
393 pmc: power@b00 {
394 compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc";
395 reg = <0xb00 0x100 0xa00 0x100>;
396 interrupts = <80 0x8>;
397 interrupt-parent = <&ipic>;
398 };
399 };
400
401 pci0: pci@e0008500 {
402 interrupt-map-mask = <0xf800 0 0 7>;
403 interrupt-map = <
404 /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
405
406 /* IDSEL AD14 IRQ6 inta */
407 0x7000 0x0 0x0 0x1 &ipic 22 0x8
408
409 /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
410 0x7800 0x0 0x0 0x1 &ipic 21 0x8
411 0x7800 0x0 0x0 0x2 &ipic 22 0x8
412 0x7800 0x0 0x0 0x4 &ipic 23 0x8
413
414 /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
415 0xE000 0x0 0x0 0x1 &ipic 23 0x8
416 0xE000 0x0 0x0 0x2 &ipic 21 0x8
417 0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
418 interrupt-parent = <&ipic>;
419 interrupts = <66 0x8>;
420 bus-range = <0x0 0x0>;
421 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
422 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
423 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
424 sleep = <&pmc 0x00010000>;
425 clock-frequency = <66666666>;
426 #interrupt-cells = <1>;
427 #size-cells = <2>;
428 #address-cells = <3>;
429 reg = <0xe0008500 0x100 /* internal registers */
430 0xe0008300 0x8>; /* config space access registers */
431 compatible = "fsl,mpc8349-pci";
432 device_type = "pci";
433 };
434
435 leds {
436 compatible = "gpio-leds";
437
438 pwr {
439 gpios = <&mcu_pio 0 0>;
440 default-state = "on";
441 };
442
443 hdd {
444 gpios = <&mcu_pio 1 0>;
445 linux,default-trigger = "disk-activity";
446 };
447 };
448};