| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| 2 | /* |
| 3 | * Tesla FSD board device tree source |
| 4 | * |
| 5 | * Copyright (c) 2017-2021 Samsung Electronics Co., Ltd. |
| 6 | * https://www.samsung.com |
| 7 | * Copyright (c) 2017-2021 Tesla, Inc. |
| 8 | * https://www.tesla.com |
| 9 | */ |
| 10 | |
| 11 | /dts-v1/; |
| 12 | #include "fsd.dtsi" |
| 13 | #include <dt-bindings/gpio/gpio.h> |
| 14 | |
| 15 | / { |
| 16 | model = "Tesla Full Self-Driving (FSD) Evaluation board"; |
| 17 | compatible = "tesla,fsd-evb", "tesla,fsd"; |
| 18 | |
| 19 | aliases { |
| 20 | serial0 = &serial_0; |
| 21 | serial1 = &serial_1; |
| 22 | }; |
| 23 | |
| 24 | chosen { |
| 25 | stdout-path = &serial_0; |
| 26 | }; |
| 27 | |
| 28 | memory@80000000 { |
| 29 | device_type = "memory"; |
| 30 | reg = <0x0 0x80000000 0x2 0x00000000>; |
| 31 | }; |
| 32 | |
| 33 | sound { |
| 34 | compatible = "simple-audio-card"; |
| 35 | |
| 36 | #address-cells = <1>; |
| 37 | #size-cells = <0>; |
| 38 | |
| 39 | simple-audio-card,name = "FSD Audio Card"; |
| 40 | simple-audio-card,widgets = "Line", "Line Out", |
| 41 | "Line", "Line In"; |
| 42 | simple-audio-card,routing = "Line Out", "LLOUT", |
| 43 | "Line Out", "RLOUT", |
| 44 | "MIC2L", "Line In", |
| 45 | "MIC2R", "Line In"; |
| 46 | |
| 47 | simple-audio-card,dai-link@0 { |
| 48 | reg = <0>; |
| 49 | format = "i2s"; |
| 50 | bitclock-master = <&tlv320aic3x>; |
| 51 | frame-master = <&tlv320aic3x>; |
| 52 | |
| 53 | cpu-0 { |
| 54 | sound-dai = <&i2s_0 0>; |
| 55 | }; |
| 56 | cpu-1 { |
| 57 | sound-dai = <&i2s_0 1>; |
| 58 | }; |
| 59 | codec { |
| 60 | sound-dai = <&tlv320aic3x>; |
| 61 | system-clock-frequency = <33000000>; |
| 62 | }; |
| 63 | }; |
| 64 | }; |
| 65 | }; |
| 66 | |
| 67 | &fin_pll { |
| 68 | clock-frequency = <24000000>; |
| 69 | }; |
| 70 | |
| 71 | &hsi2c_5 { |
| 72 | status = "okay"; |
| 73 | |
| 74 | tlv320aic3x: codec@18 { |
| 75 | compatible = "ti,tlv320aic3104"; |
| 76 | reg = <0x18>; |
| 77 | #sound-dai-cells = <0>; |
| 78 | reset-gpios = <&gpg1 6 GPIO_ACTIVE_LOW>; |
| 79 | }; |
| 80 | }; |
| 81 | |
| 82 | &i2s_0 { |
| 83 | status = "okay"; |
| 84 | }; |
| 85 | |
| 86 | &i2s_1 { |
| 87 | status = "okay"; |
| 88 | }; |
| 89 | |
| 90 | &m_can0 { |
| 91 | status = "okay"; |
| 92 | }; |
| 93 | |
| 94 | &m_can1 { |
| 95 | status = "okay"; |
| 96 | }; |
| 97 | |
| 98 | &m_can2 { |
| 99 | status = "okay"; |
| 100 | }; |
| 101 | |
| 102 | &m_can3 { |
| 103 | status = "okay"; |
| 104 | }; |
| 105 | |
| 106 | &serial_0 { |
| 107 | status = "okay"; |
| 108 | }; |
| 109 | |
| 110 | &ufs { |
| 111 | status = "okay"; |
| 112 | }; |