blob: 7135a83e0422fc0314622bb8c7808f3940776ffd [file] [log] [blame]
Ying-Chun Liu (PaulLiu)a97107f2021-04-22 04:50:31 +08001/* SPDX-License-Identifier: GPL-2.0+ */
2/*
3 * Copyright 2019 NXP
4 */
5
6#ifndef __IMX8MM_CL_IOT_GATE_H
7#define __IMX8MM_CL_IOT_GATE_H
8
9#include <linux/sizes.h>
10#include <linux/stringify.h>
11#include <asm/arch/imx-regs.h>
12#include <config_distro_bootcmd.h>
13
14#define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M)
Ying-Chun Liu (PaulLiu)a97107f2021-04-22 04:50:31 +080015#define CONFIG_SYS_MONITOR_LEN SZ_512K
Ying-Chun Liu (PaulLiu)a97107f2021-04-22 04:50:31 +080016#define CONFIG_SYS_UBOOT_BASE \
17 (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
18
19#ifdef CONFIG_SPL_BUILD
Ying-Chun Liu (PaulLiu)a97107f2021-04-22 04:50:31 +080020/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
21#define CONFIG_MALLOC_F_ADDR 0x912000
22/* For RAW image gives a error info not panic */
Ying-Chun Liu (PaulLiu)a97107f2021-04-22 04:50:31 +080023
24#endif
25
Sughosh Ganuccb36462022-04-15 11:29:34 +053026/* GUIDs for capsule updatable firmware images */
27#define IMX8MM_CL_IOT_GATE_FIT_IMAGE_GUID \
28 EFI_GUID(0x7a32a939, 0xab92, 0x467b, 0x91, 0x52, \
29 0x74, 0x77, 0x1b, 0x95, 0xe6, 0x46)
30
31#define IMX8MM_CL_IOT_GATE_OPTEE_FIT_IMAGE_GUID \
32 EFI_GUID(0x0bf1165c, 0x1831, 0x4864, 0x94, 0x5e, \
33 0xac, 0x3d, 0x38, 0x48, 0xf4, 0x99)
34
Ying-Chun Liu (PaulLiu)a97107f2021-04-22 04:50:31 +080035#if CONFIG_IS_ENABLED(CMD_MMC)
36# define BOOT_TARGET_MMC(func) \
37 func(MMC, mmc, 2) \
38 func(MMC, mmc, 0)
39#else
40# define BOOT_TARGET_MMC(func)
41#endif
42
43#if CONFIG_IS_ENABLED(CMD_USB)
44# define BOOT_TARGET_USB(func) func(USB, usb, 0)
45#else
46# define BOOT_TARGET_USB(func)
47#endif
48
49#if CONFIG_IS_ENABLED(CMD_PXE)
50# define BOOT_TARGET_PXE(func) func(PXE, pxe, na)
51#else
52# define BOOT_TARGET_PXE(func)
53#endif
54
55#if CONFIG_IS_ENABLED(CMD_DHCP)
56# define BOOT_TARGET_DHCP(func) func(DHCP, dhcp, na)
57#else
58# define BOOT_TARGET_DHCP(func)
59#endif
60
61#define BOOT_TARGET_DEVICES(func) \
62 BOOT_TARGET_USB(func) \
63 BOOT_TARGET_MMC(func) \
64 BOOT_TARGET_PXE(func) \
65 BOOT_TARGET_DHCP(func)
66
67/* Initial environment variables */
68#define CONFIG_EXTRA_ENV_SETTINGS \
69 BOOTENV \
70 "script=boot.scr\0" \
71 "image=Image\0" \
72 "console=ttymxc2,115200 earlycon=ec_imx6q,0x30880000,115200\0" \
73 "fdt_addr=0x43000000\0" \
74 "fdt_addr_r=0x43000000\0" \
75 "boot_fit=no\0" \
Ying-Chun Liu (PaulLiu)89158f32022-01-12 00:38:04 +080076 "dfu_alt_info=mmc 2=flash-bin raw 0x42 0x1D00 mmcpart 1\0" \
Ying-Chun Liu (PaulLiu)a97107f2021-04-22 04:50:31 +080077 "fdt_file=sb-iotgimx8.dtb\0" \
78 "fdtfile=sb-iotgimx8.dtb\0" \
79 "initrd_addr=0x43800000\0" \
80 "bootm_size=0x10000000\0" \
81 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
Tom Rinib113bca2021-12-11 14:55:52 -050082 "mmcpart=1\0" \
Peng Fanbb4bb582022-04-15 12:23:41 +080083 "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
Ying-Chun Liu (PaulLiu)a97107f2021-04-22 04:50:31 +080084 "mmcautodetect=yes\0" \
85 "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
86 "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
87 "bootscript=echo Running bootscript from mmc ...; " \
88 "source\0" \
89 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
90 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
91 "kernel_addr_r=0x40480000\0" \
92 "pxefile_addr_r=0x40480000\0" \
93 "ramdisk_addr_r=0x43800000\0" \
94 "mmcboot=echo Booting from mmc ...; " \
95 "run mmcargs; " \
96 "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
97 "bootm ${loadaddr}; " \
98 "else " \
99 "if run loadfdt; then " \
100 "booti ${loadaddr} - ${fdt_addr}; " \
101 "else " \
102 "echo WARN: Cannot load the DT; " \
103 "fi; " \
104 "fi;\0" \
105 "netargs=setenv bootargs console=${console} " \
106 "root=/dev/nfs " \
107 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
108 "netboot=echo Booting from net ...; " \
109 "run netargs; " \
110 "if test ${ip_dyn} = yes; then " \
111 "setenv get_cmd dhcp; " \
112 "else " \
113 "setenv get_cmd tftp; " \
114 "fi; " \
115 "${get_cmd} ${loadaddr} ${image}; " \
116 "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
117 "bootm ${loadaddr}; " \
118 "else " \
119 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
120 "booti ${loadaddr} - ${fdt_addr}; " \
121 "else " \
122 "echo WARN: Cannot load the DT; " \
123 "fi; " \
124 "fi;\0"
125
Ying-Chun Liu (PaulLiu)a97107f2021-04-22 04:50:31 +0800126/* Link Definitions */
Ying-Chun Liu (PaulLiu)a97107f2021-04-22 04:50:31 +0800127
128#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
129#define CONFIG_SYS_INIT_RAM_SIZE 0x80000
Ying-Chun Liu (PaulLiu)a97107f2021-04-22 04:50:31 +0800130
Ying-Chun Liu (PaulLiu)a97107f2021-04-22 04:50:31 +0800131
Ying-Chun Liu (PaulLiu)a97107f2021-04-22 04:50:31 +0800132#define CONFIG_SYS_SDRAM_BASE 0x40000000
133#define PHYS_SDRAM 0x40000000
134#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
135
Ying-Chun Liu (PaulLiu)a97107f2021-04-22 04:50:31 +0800136/* USDHC */
Ying-Chun Liu (PaulLiu)a97107f2021-04-22 04:50:31 +0800137
138#define CONFIG_SYS_FSL_USDHC_NUM 2
139#define CONFIG_SYS_FSL_ESDHC_ADDR 0
140
Ying-Chun Liu (PaulLiu)a97107f2021-04-22 04:50:31 +0800141#define CONFIG_FEC_MXC_PHYADDR 0
Ying-Chun Liu (PaulLiu)a97107f2021-04-22 04:50:31 +0800142
Ying-Chun Liu (PaulLiu)a97107f2021-04-22 04:50:31 +0800143/* USB Configs */
144#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
145#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
146#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
147
148#endif /*__IMX8MM_CL_IOT_GATE_H*/