blob: 86d1ccd3b213032dbfbf4d839bb01c4e6707f5ea [file] [log] [blame]
Heiko Schocherb7a6d142015-06-15 14:56:41 +02001/*
2 * (C) Copyright 2013 Siemens Schweiz AG
3 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
4 *
5 * Based on:
6 * U-Boot file:/include/configs/am335x_evm.h
7 *
8 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
9 *
10 * SPDX-License-Identifier: GPL-2.0+
11 */
12
13#ifndef __CONFIG_RASTABAN_H
14#define __CONFIG_RASTABAN_H
15
16#include "siemens-am33x-common.h"
17
Heiko Schocherb7a6d142015-06-15 14:56:41 +020018#define CONFIG_SYS_MPUCLK 300
19#define DDR_PLL_FREQ 303
20#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
21
22/* FWD Button = 27
23 * SRV Button = 87 */
24#define BOARD_DFU_BUTTON_GPIO 27
25#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */
26/* In dfu mode keep led1 on */
27#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
28 "button_dfu0=27\0" \
29 "button_dfu1=87\0" \
30 "led0=3,0,1\0" \
31 "led1=4,0,0\0" \
32 "led2=5,0,1\0" \
33 "led3=62,0,1\0" \
34 "led4=60,0,1\0" \
35 "led5=63,0,1\0"
36
37#undef CONFIG_DOS_PARTITION
Heiko Schocherb7a6d142015-06-15 14:56:41 +020038
Heiko Schocherb7a6d142015-06-15 14:56:41 +020039 /* Physical Memory Map */
40#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
41
42/* I2C Configuration */
43#define CONFIG_SYS_I2C_SPEED 100000
44
45#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
46#define EEPROM_ADDR_DDR3 0x90
47#define EEPROM_ADDR_CHIP 0x120
48
Heiko Schocherb7a6d142015-06-15 14:56:41 +020049#undef CONFIG_MII
50#undef CONFIG_PHY_GIGE
51#define CONFIG_PHY_SMSC
52
53#define CONFIG_FACTORYSET
54
55/* Watchdog */
56#define CONFIG_OMAP_WATCHDOG
57
58/* Define own nand partitions */
59#define CONFIG_ENV_OFFSET_REDUND 0x2E0000
60#define CONFIG_ENV_SIZE_REDUND 0x2000
61#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE)
62
Heiko Schocherb7a6d142015-06-15 14:56:41 +020063#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V3
64
65#ifndef CONFIG_SPL_BUILD
66
67/* Default env settings */
68#define CONFIG_EXTRA_ENV_SETTINGS \
69 "hostname=rastaban\0" \
Heiko Schochercbec11a2016-06-07 08:55:45 +020070 "ubi_off=2048\0"\
Heiko Schocherb7a6d142015-06-15 14:56:41 +020071 "nand_img_size=0x400000\0" \
72 "optargs=\0" \
73 "preboot=draco_led 0\0" \
74 CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
75 CONFIG_ENV_SETTINGS_V2 \
76 CONFIG_ENV_SETTINGS_NAND_V2
77
78#ifndef CONFIG_RESTORE_FLASH
79/* set to negative value for no autoboot */
Heiko Schocherb7a6d142015-06-15 14:56:41 +020080
81#define CONFIG_BOOTCOMMAND \
82"if dfubutton; then " \
83 "run dfu_start; " \
84 "reset; " \
85"fi;" \
86"run nand_boot;" \
87"run nand_boot_backup;" \
88"reset;"
89
Heiko Schocherb7a6d142015-06-15 14:56:41 +020090#else
Heiko Schocherb7a6d142015-06-15 14:56:41 +020091
92#define CONFIG_BOOTCOMMAND \
93 "setenv autoload no; " \
94 "dhcp; " \
95 "if tftp 80000000 debrick.scr; then " \
96 "source 80000000; " \
97 "fi"
98#endif
99#endif /* CONFIG_SPL_BUILD */
100#endif /* ! __CONFIG_RASTABAN_H */