Jagan Teki | 4c44d50 | 2018-11-05 13:20:39 +0530 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ or MIT) |
| 2 | /* |
| 3 | * Copyright (C) 2018 Amarula Solutions |
| 4 | * Author: Jagan Teki <jagan@amarulasolutions.com> |
| 5 | */ |
| 6 | |
| 7 | /dts-v1/; |
| 8 | |
| 9 | #include "sun50i-h6.dtsi" |
| 10 | |
| 11 | #include <dt-bindings/gpio/gpio.h> |
| 12 | |
| 13 | / { |
| 14 | model = "OrangePi One Plus"; |
| 15 | compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6"; |
| 16 | |
| 17 | aliases { |
| 18 | serial0 = &uart0; |
| 19 | }; |
| 20 | |
| 21 | chosen { |
| 22 | stdout-path = "serial0:115200n8"; |
| 23 | }; |
Jagan Teki | 7d412cd | 2019-04-14 22:22:21 +0530 | [diff] [blame] | 24 | |
| 25 | leds { |
| 26 | compatible = "gpio-leds"; |
| 27 | |
| 28 | power { |
| 29 | label = "orangepi:red:power"; |
| 30 | gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ |
| 31 | default-state = "on"; |
| 32 | }; |
| 33 | |
| 34 | status { |
| 35 | label = "orangepi:green:status"; |
| 36 | gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ |
| 37 | }; |
| 38 | }; |
| 39 | |
| 40 | reg_vcc5v: vcc5v { |
| 41 | /* board wide 5V supply directly from the DC jack */ |
| 42 | compatible = "regulator-fixed"; |
| 43 | regulator-name = "vcc-5v"; |
| 44 | regulator-min-microvolt = <5000000>; |
| 45 | regulator-max-microvolt = <5000000>; |
| 46 | regulator-always-on; |
| 47 | }; |
| 48 | }; |
| 49 | |
| 50 | &ehci0 { |
| 51 | status = "okay"; |
| 52 | }; |
| 53 | |
| 54 | &ehci3 { |
| 55 | status = "okay"; |
Jagan Teki | 4c44d50 | 2018-11-05 13:20:39 +0530 | [diff] [blame] | 56 | }; |
| 57 | |
| 58 | &mmc0 { |
Jagan Teki | 4c44d50 | 2018-11-05 13:20:39 +0530 | [diff] [blame] | 59 | vmmc-supply = <®_cldo1>; |
| 60 | cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; |
| 61 | bus-width = <4>; |
| 62 | status = "okay"; |
| 63 | }; |
| 64 | |
Jagan Teki | 7d412cd | 2019-04-14 22:22:21 +0530 | [diff] [blame] | 65 | &ohci0 { |
| 66 | status = "okay"; |
| 67 | }; |
| 68 | |
| 69 | &ohci3 { |
| 70 | status = "okay"; |
| 71 | }; |
| 72 | |
Jagan Teki | 4c44d50 | 2018-11-05 13:20:39 +0530 | [diff] [blame] | 73 | &r_i2c { |
| 74 | status = "okay"; |
| 75 | |
| 76 | axp805: pmic@36 { |
| 77 | compatible = "x-powers,axp805", "x-powers,axp806"; |
| 78 | reg = <0x36>; |
| 79 | interrupt-parent = <&r_intc>; |
| 80 | interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
| 81 | interrupt-controller; |
| 82 | #interrupt-cells = <1>; |
| 83 | x-powers,self-working-mode; |
Jagan Teki | 7d412cd | 2019-04-14 22:22:21 +0530 | [diff] [blame] | 84 | vina-supply = <®_vcc5v>; |
| 85 | vinb-supply = <®_vcc5v>; |
| 86 | vinc-supply = <®_vcc5v>; |
| 87 | vind-supply = <®_vcc5v>; |
| 88 | vine-supply = <®_vcc5v>; |
| 89 | aldoin-supply = <®_vcc5v>; |
| 90 | bldoin-supply = <®_vcc5v>; |
| 91 | cldoin-supply = <®_vcc5v>; |
Jagan Teki | 4c44d50 | 2018-11-05 13:20:39 +0530 | [diff] [blame] | 92 | |
| 93 | regulators { |
| 94 | reg_aldo1: aldo1 { |
| 95 | regulator-always-on; |
| 96 | regulator-min-microvolt = <3300000>; |
| 97 | regulator-max-microvolt = <3300000>; |
| 98 | regulator-name = "vcc-pl"; |
| 99 | }; |
| 100 | |
| 101 | reg_aldo2: aldo2 { |
| 102 | regulator-min-microvolt = <3300000>; |
| 103 | regulator-max-microvolt = <3300000>; |
| 104 | regulator-name = "vcc-ac200"; |
| 105 | }; |
| 106 | |
| 107 | reg_aldo3: aldo3 { |
| 108 | regulator-always-on; |
| 109 | regulator-min-microvolt = <3300000>; |
| 110 | regulator-max-microvolt = <3300000>; |
| 111 | regulator-name = "vcc25-dram"; |
| 112 | }; |
| 113 | |
| 114 | reg_bldo1: bldo1 { |
| 115 | regulator-always-on; |
| 116 | regulator-min-microvolt = <1800000>; |
| 117 | regulator-max-microvolt = <1800000>; |
| 118 | regulator-name = "vcc-bias-pll"; |
| 119 | }; |
| 120 | |
| 121 | reg_bldo2: bldo2 { |
| 122 | regulator-always-on; |
| 123 | regulator-min-microvolt = <1800000>; |
| 124 | regulator-max-microvolt = <1800000>; |
| 125 | regulator-name = "vcc-efuse-pcie-hdmi-io"; |
| 126 | }; |
| 127 | |
| 128 | reg_bldo3: bldo3 { |
| 129 | regulator-always-on; |
| 130 | regulator-min-microvolt = <1800000>; |
| 131 | regulator-max-microvolt = <1800000>; |
| 132 | regulator-name = "vcc-dcxoio"; |
| 133 | }; |
| 134 | |
| 135 | bldo4 { |
| 136 | /* unused */ |
| 137 | }; |
| 138 | |
| 139 | reg_cldo1: cldo1 { |
| 140 | regulator-always-on; |
| 141 | regulator-min-microvolt = <3300000>; |
| 142 | regulator-max-microvolt = <3300000>; |
| 143 | regulator-name = "vcc-3v3"; |
| 144 | }; |
| 145 | |
| 146 | reg_cldo2: cldo2 { |
| 147 | regulator-min-microvolt = <3300000>; |
| 148 | regulator-max-microvolt = <3300000>; |
| 149 | regulator-name = "vcc-wifi-1"; |
| 150 | }; |
| 151 | |
| 152 | reg_cldo3: cldo3 { |
| 153 | regulator-min-microvolt = <3300000>; |
| 154 | regulator-max-microvolt = <3300000>; |
| 155 | regulator-name = "vcc-wifi-2"; |
| 156 | }; |
| 157 | |
| 158 | reg_dcdca: dcdca { |
| 159 | regulator-always-on; |
| 160 | regulator-min-microvolt = <810000>; |
| 161 | regulator-max-microvolt = <1080000>; |
| 162 | regulator-name = "vdd-cpu"; |
| 163 | }; |
| 164 | |
| 165 | reg_dcdcc: dcdcc { |
| 166 | regulator-min-microvolt = <810000>; |
| 167 | regulator-max-microvolt = <1080000>; |
| 168 | regulator-name = "vdd-gpu"; |
| 169 | }; |
| 170 | |
| 171 | reg_dcdcd: dcdcd { |
| 172 | regulator-always-on; |
| 173 | regulator-min-microvolt = <960000>; |
| 174 | regulator-max-microvolt = <960000>; |
| 175 | regulator-name = "vdd-sys"; |
| 176 | }; |
| 177 | |
| 178 | reg_dcdce: dcdce { |
| 179 | regulator-always-on; |
| 180 | regulator-min-microvolt = <1200000>; |
| 181 | regulator-max-microvolt = <1200000>; |
| 182 | regulator-name = "vcc-dram"; |
| 183 | }; |
| 184 | |
| 185 | sw { |
| 186 | /* unused */ |
| 187 | }; |
| 188 | }; |
| 189 | }; |
| 190 | }; |
| 191 | |
| 192 | &uart0 { |
| 193 | pinctrl-names = "default"; |
| 194 | pinctrl-0 = <&uart0_ph_pins>; |
| 195 | status = "okay"; |
| 196 | }; |
Jagan Teki | 7d412cd | 2019-04-14 22:22:21 +0530 | [diff] [blame] | 197 | |
| 198 | &usb2otg { |
| 199 | dr_mode = "otg"; |
| 200 | status = "okay"; |
| 201 | }; |
| 202 | |
| 203 | &usb2phy { |
| 204 | usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */ |
| 205 | usb0_vbus-supply = <®_vcc5v>; |
| 206 | usb3_vbus-supply = <®_vcc5v>; |
| 207 | status = "okay"; |
| 208 | }; |