| Neha Malcom Francis | b912d4f | 2023-03-15 10:57:45 +0530 | [diff] [blame] | 1 | #include <environment/ti/ti_armv7_common.env> |
| 2 | #include <environment/ti/mmc.env> |
| 3 | #include <environment/ti/ufs.env> |
| 4 | #include <environment/ti/k3_dfu.env> |
| 5 | |
| 6 | #if CONFIG_CMD_REMOTEPROC |
| 7 | #include <environment/ti/k3_rproc.env> |
| 8 | #endif |
| 9 | |
| 10 | default_device_tree=k3-j721e-common-proc-board.dtb |
| 11 | findfdt= |
| 12 | setenv name_fdt ${default_device_tree}; |
| 13 | if test $board_name = j721e; then |
| 14 | setenv name_fdt k3-j721e-common-proc-board.dtb; fi; |
| 15 | if test $board_name = j721e-eaik || test $board_name = j721e-sk; then |
| 16 | setenv name_fdt k3-j721e-sk.dtb; fi; |
| 17 | setenv fdtfile ${name_fdt} |
| 18 | name_kern=Image |
| 19 | console=ttyS2,115200n8 |
| 20 | args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 |
| 21 | ${mtdparts} |
| 22 | run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} |
| 23 | |
| 24 | #if CONFIG_SYS_K3_SPL_ATF |
| 25 | #if CONFIG_TARGET_J721E_R5_EVM |
| 26 | addr_mcur5f0_0load=0x89000000 |
| 27 | name_mcur5f0_0fw=/lib/firmware/j7-mcu-r5f0_0-fw |
| 28 | #elif CONFIG_TARGET_J7200_R5_EVM |
| 29 | addr_mcur5f0_0load=0x89000000 |
| 30 | name_mcur5f0_0fw=/lib/firmware/j7200-mcu-r5f0_0-fw |
| 31 | #endif |
| 32 | #endif |
| 33 | |
| 34 | boot=mmc |
| 35 | mmcdev=1 |
| 36 | bootpart=1:2 |
| 37 | bootdir=/boot |
| 38 | rd_spec=- |
| 39 | init_mmc=run args_all args_mmc |
| 40 | get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt} |
| 41 | get_overlay_mmc= |
| 42 | fdt address ${fdtaddr}; |
| 43 | fdt resize 0x100000; |
| 44 | for overlay in $name_overlays; |
| 45 | do; |
| 46 | load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && |
| 47 | fdt apply ${dtboaddr}; |
| 48 | done; |
| 49 | partitions=uuid_disk=${uuid_gpt_disk}; |
| 50 | name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs} |
| 51 | get_kern_mmc=load mmc ${bootpart} ${loadaddr} |
| 52 | ${bootdir}/${name_kern} |
| 53 | get_fit_mmc=load mmc ${bootpart} ${addr_fit} |
| 54 | ${bootdir}/${name_fit} |
| 55 | |
| 56 | #if CONFIG_TARGET_J7200_A72_EVM |
| 57 | do_main_cpsw0_qsgmii_phyinit=1 |
| 58 | init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17; |
| 59 | gpio clear gpio@22_16 |
| 60 | main_cpsw0_qsgmii_phyinit= |
| 61 | if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && test ${boot} = mmc; then |
| 62 | run init_main_cpsw0_qsgmii_phy; |
| 63 | fi; |
| 64 | #elif CONFIG_TARGET_J721E_A72_EVM |
| 65 | init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17; |
| 66 | gpio clear gpio@22_16 |
| 67 | main_cpsw0_qsgmii_phyinit= |
| 68 | if test $board_name = J721EX-PM1-SOM || test $board_name = J721EX-PM2-SOM || test $board_name = j721e; then |
| 69 | do_main_cpsw0_qsgmii_phyinit=1; else |
| 70 | do_main_cpsw0_qsgmii_phyinit=0; fi; |
| 71 | if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && test ${boot} = mmc; then |
| 72 | run init_main_cpsw0_qsgmii_phy; \ |
| 73 | fi; |
| 74 | #endif |
| 75 | |
| 76 | #if CONFIG_TARGET_J721E_A72_EVM |
| 77 | rproc_fw_binaries=2 /lib/firmware/j7-main-r5f0_0-fw 3 /lib/firmware/j7-main-r5f0_1-fw 4 /lib/firmware/j7-main-r5f1_0-fw 5 /lib/firmware/j7-main-r5f1_1-fw 6 /lib/firmware/j7-c66_0-fw 7 /lib/firmware/j7-c66_1-fw 8 /lib/firmware/j7-c71_0-fw |
| 78 | #endif |
| 79 | |
| 80 | #if CONFIG_TARGET_J7200_A72_EVM |
| 81 | rproc_fw_binaries=2 /lib/firmware/j7200-main-r5f0_0-fw 3 /lib/firmware/j7200-main-r5f0_1-fw |
| 82 | #endif |