David Woodhouse | a66a356 | 2020-07-12 23:33:03 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2018 MediaTek Inc. |
| 3 | * Author: Ryder Lee <ryder.lee@mediatek.com> |
| 4 | * |
| 5 | * SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 6 | */ |
| 7 | |
| 8 | /dts-v1/; |
| 9 | #include "mt7623.dtsi" |
| 10 | #include "mt7623-u-boot.dtsi" |
| 11 | |
| 12 | / { |
| 13 | model = "UniElec U7623-02 eMMC"; |
| 14 | compatible = "unielec,u7623-02-emmc", "mediatek,mt7623"; |
| 15 | |
| 16 | memory@80000000 { |
| 17 | device_type = "memory"; |
| 18 | reg = <0 0x80000000 0 0x20000000>; |
| 19 | }; |
| 20 | |
| 21 | chosen { |
| 22 | stdout-path = &uart2; |
| 23 | tick-timer = &timer0; |
| 24 | }; |
| 25 | |
| 26 | reg_1p8v: regulator-1p8v { |
| 27 | compatible = "regulator-fixed"; |
| 28 | regulator-name = "fixed-1.8V"; |
| 29 | regulator-min-microvolt = <1800000>; |
| 30 | regulator-max-microvolt = <1800000>; |
| 31 | regulator-boot-on; |
| 32 | regulator-always-on; |
| 33 | }; |
| 34 | |
| 35 | reg_3p3v: regulator-3p3v { |
| 36 | compatible = "regulator-fixed"; |
| 37 | regulator-name = "fixed-3.3V"; |
| 38 | regulator-min-microvolt = <3300000>; |
| 39 | regulator-max-microvolt = <3300000>; |
| 40 | regulator-boot-on; |
| 41 | regulator-always-on; |
| 42 | }; |
| 43 | |
| 44 | reg_5v: regulator-5v { |
| 45 | compatible = "regulator-fixed"; |
| 46 | regulator-name = "fixed-5V"; |
| 47 | regulator-min-microvolt = <5000000>; |
| 48 | regulator-max-microvolt = <5000000>; |
| 49 | regulator-boot-on; |
| 50 | regulator-always-on; |
| 51 | }; |
| 52 | |
| 53 | leds { |
| 54 | compatible = "gpio-leds"; |
| 55 | |
| 56 | led3 { |
| 57 | label = "u7623-01:green:led3"; |
| 58 | gpios = <&gpio 14 GPIO_ACTIVE_LOW>; |
| 59 | default-state = "off"; |
| 60 | }; |
| 61 | |
| 62 | led4 { |
| 63 | label = "u7623-01:green:led4"; |
| 64 | gpios = <&gpio 15 GPIO_ACTIVE_LOW>; |
| 65 | default-state = "off"; |
| 66 | }; |
| 67 | }; |
| 68 | }; |
| 69 | |
| 70 | ð { |
| 71 | status = "okay"; |
| 72 | mediatek,gmac-id = <0>; |
| 73 | phy-mode = "rgmii"; |
| 74 | mediatek,switch = "mt7530"; |
| 75 | mediatek,mcm; |
| 76 | |
| 77 | fixed-link { |
| 78 | speed = <1000>; |
| 79 | full-duplex; |
| 80 | }; |
| 81 | }; |
| 82 | |
| 83 | &mmc0 { |
| 84 | pinctrl-names = "default"; |
| 85 | pinctrl-0 = <&mmc0_pins_default>; |
| 86 | status = "okay"; |
| 87 | bus-width = <8>; |
| 88 | max-frequency = <50000000>; |
| 89 | cap-mmc-highspeed; |
| 90 | vmmc-supply = <®_3p3v>; |
| 91 | vqmmc-supply = <®_1p8v>; |
| 92 | non-removable; |
| 93 | }; |
| 94 | |
| 95 | &pinctrl { |
| 96 | ephy_default: ephy_default { |
| 97 | mux { |
| 98 | function = "eth"; |
| 99 | groups = "mdc_mdio", "ephy"; |
| 100 | }; |
| 101 | |
| 102 | conf { |
| 103 | pins = "G2_TXEN", "G2_TXD0", "G2_TXD1", "G2_TXD2", |
| 104 | "G2_TXD3", "G2_TXC", "G2_RXC", "G2_RXD0", |
| 105 | "G2_RXD1", "G2_RXD2", "G2_RXD3", "G2_RXDV", |
| 106 | "MDC", "MDIO"; |
| 107 | drive-strength = <12>; |
| 108 | mediatek,tdsel = <5>; |
| 109 | }; |
| 110 | }; |
| 111 | |
| 112 | mmc0_pins_default: mmc0default { |
| 113 | mux { |
| 114 | function = "msdc"; |
| 115 | groups = "msdc0"; |
| 116 | }; |
| 117 | |
| 118 | conf-cmd-data { |
| 119 | pins = "MSDC0_CMD", "MSDC0_DAT0", "MSDC0_DAT1", |
| 120 | "MSDC0_DAT2", "MSDC0_DAT3", "MSDC0_DAT4", |
| 121 | "MSDC0_DAT5", "MSDC0_DAT6", "MSDC0_DAT7"; |
| 122 | input-enable; |
| 123 | bias-pull-up; |
| 124 | }; |
| 125 | |
| 126 | conf-clk { |
| 127 | pins = "MSDC0_CLK"; |
| 128 | bias-pull-down; |
| 129 | }; |
| 130 | |
| 131 | conf-rst { |
| 132 | pins = "MSDC0_RSTB"; |
| 133 | bias-pull-up; |
| 134 | }; |
| 135 | }; |
| 136 | |
| 137 | pcie_default: pcie-default { |
| 138 | mux { |
| 139 | function = "pcie"; |
| 140 | groups = "pcie0_0_perst", "pcie1_0_perst"; |
| 141 | }; |
| 142 | }; |
| 143 | |
| 144 | uart0_pins_a: uart0-default { |
| 145 | mux { |
| 146 | function = "uart"; |
| 147 | groups = "uart0_0_txd_rxd"; |
| 148 | }; |
| 149 | }; |
| 150 | |
| 151 | uart1_pins_a: uart1-default { |
| 152 | mux { |
| 153 | function = "uart"; |
| 154 | groups = "uart1_0_txd_rxd"; |
| 155 | }; |
| 156 | }; |
| 157 | |
| 158 | uart2_pins_a: uart2-default { |
| 159 | mux { |
| 160 | function = "uart"; |
| 161 | groups = "uart2_0_txd_rxd"; |
| 162 | }; |
| 163 | }; |
| 164 | |
| 165 | uart2_pins_b: uart2-alt { |
| 166 | mux { |
| 167 | function = "uart"; |
| 168 | groups = "uart2_1_txd_rxd"; |
| 169 | }; |
| 170 | }; |
| 171 | }; |
| 172 | |
| 173 | &pcie { |
| 174 | pinctrl-names = "default"; |
| 175 | pinctrl-0 = <&pcie_default>; |
| 176 | status = "okay"; |
| 177 | |
| 178 | pcie@0,0 { |
| 179 | status = "okay"; |
| 180 | }; |
| 181 | |
| 182 | pcie@1,0 { |
| 183 | status = "okay"; |
| 184 | }; |
| 185 | }; |
| 186 | |
| 187 | &pcie0_phy { |
| 188 | status = "okay"; |
| 189 | }; |
| 190 | |
| 191 | &pcie1_phy { |
| 192 | status = "okay"; |
| 193 | }; |
| 194 | |
| 195 | &uart0 { |
| 196 | pinctrl-names = "default"; |
| 197 | pinctrl-0 = <&uart0_pins_a>; |
| 198 | status = "okay"; |
| 199 | }; |
| 200 | |
| 201 | &uart1 { |
| 202 | pinctrl-names = "default"; |
| 203 | pinctrl-0 = <&uart1_pins_a>; |
| 204 | status = "okay"; |
| 205 | }; |
| 206 | |
| 207 | &uart2 { |
| 208 | pinctrl-names = "default"; |
| 209 | pinctrl-0 = <&uart2_pins_b>; |
| 210 | status = "okay"; |
| 211 | }; |