Heinrich Schuchardt | d322f92 | 2018-01-21 19:29:31 +0100 | [diff] [blame] | 1 | /* |
| 2 | * efi_selftest_block |
| 3 | * |
| 4 | * Copyright (c) 2017 Heinrich Schuchardt <xypron.glpk@gmx.de> |
| 5 | * |
| 6 | * SPDX-License-Identifier: GPL-2.0+ |
| 7 | * |
| 8 | * This test checks the driver for block IO devices. |
| 9 | * A disk image is created in memory. |
| 10 | * A handle is created for the new block IO device. |
| 11 | * The block I/O protocol is installed on the handle. |
| 12 | * ConnectController is used to setup partitions and to install the simple |
| 13 | * file protocol. |
| 14 | * A known file is read from the file system and verified. |
| 15 | */ |
| 16 | |
| 17 | #include <efi_selftest.h> |
| 18 | #include "efi_selftest_disk_image.h" |
| 19 | |
| 20 | /* Block size of compressed disk image */ |
| 21 | #define COMPRESSED_DISK_IMAGE_BLOCK_SIZE 8 |
| 22 | |
| 23 | /* Binary logarithm of the block size */ |
| 24 | #define LB_BLOCK_SIZE 9 |
| 25 | |
| 26 | static struct efi_boot_services *boottime; |
| 27 | |
| 28 | static const efi_guid_t block_io_protocol_guid = BLOCK_IO_GUID; |
| 29 | static const efi_guid_t guid_device_path = DEVICE_PATH_GUID; |
| 30 | static const efi_guid_t guid_simple_file_system_protocol = |
| 31 | EFI_SIMPLE_FILE_SYSTEM_PROTOCOL_GUID; |
| 32 | static efi_guid_t guid_vendor = |
| 33 | EFI_GUID(0xdbca4c98, 0x6cb0, 0x694d, |
| 34 | 0x08, 0x72, 0x81, 0x9c, 0x65, 0x0c, 0xb7, 0xb8); |
| 35 | |
| 36 | static struct efi_device_path *dp; |
| 37 | |
| 38 | /* One 8 byte block of the compressed disk image */ |
| 39 | struct line { |
| 40 | size_t addr; |
| 41 | char *line; |
| 42 | }; |
| 43 | |
| 44 | /* Compressed disk image */ |
| 45 | struct compressed_disk_image { |
| 46 | size_t length; |
| 47 | struct line lines[]; |
| 48 | }; |
| 49 | |
| 50 | static const struct compressed_disk_image img = EFI_ST_DISK_IMG; |
| 51 | |
| 52 | /* Decompressed disk image */ |
| 53 | static u8 *image; |
| 54 | |
| 55 | /* |
| 56 | * Reset service of the block IO protocol. |
| 57 | * |
| 58 | * @this block IO protocol |
| 59 | * @return status code |
| 60 | */ |
| 61 | static efi_status_t EFIAPI reset( |
| 62 | struct efi_block_io *this, |
| 63 | char extended_verification) |
| 64 | { |
| 65 | return EFI_SUCCESS; |
| 66 | } |
| 67 | |
| 68 | /* |
| 69 | * Read service of the block IO protocol. |
| 70 | * |
| 71 | * @this block IO protocol |
| 72 | * @media_id media id |
| 73 | * @lba start of the read in logical blocks |
| 74 | * @buffer_size number of bytes to read |
| 75 | * @buffer target buffer |
| 76 | * @return status code |
| 77 | */ |
| 78 | static efi_status_t EFIAPI read_blocks( |
| 79 | struct efi_block_io *this, u32 media_id, u64 lba, |
| 80 | efi_uintn_t buffer_size, void *buffer) |
| 81 | { |
| 82 | u8 *start; |
| 83 | |
| 84 | if ((lba << LB_BLOCK_SIZE) + buffer_size > img.length) |
| 85 | return EFI_INVALID_PARAMETER; |
| 86 | start = image + (lba << LB_BLOCK_SIZE); |
| 87 | |
| 88 | boottime->copy_mem(buffer, start, buffer_size); |
| 89 | |
| 90 | return EFI_SUCCESS; |
| 91 | } |
| 92 | |
| 93 | /* |
| 94 | * Write service of the block IO protocol. |
| 95 | * |
| 96 | * @this block IO protocol |
| 97 | * @media_id media id |
| 98 | * @lba start of the write in logical blocks |
| 99 | * @buffer_size number of bytes to read |
| 100 | * @buffer source buffer |
| 101 | * @return status code |
| 102 | */ |
| 103 | static efi_status_t EFIAPI write_blocks( |
| 104 | struct efi_block_io *this, u32 media_id, u64 lba, |
| 105 | efi_uintn_t buffer_size, void *buffer) |
| 106 | { |
| 107 | u8 *start; |
| 108 | |
| 109 | if ((lba << LB_BLOCK_SIZE) + buffer_size > img.length) |
| 110 | return EFI_INVALID_PARAMETER; |
| 111 | start = image + (lba << LB_BLOCK_SIZE); |
| 112 | |
| 113 | boottime->copy_mem(start, buffer, buffer_size); |
| 114 | |
| 115 | return EFI_SUCCESS; |
| 116 | } |
| 117 | |
| 118 | /* |
| 119 | * Flush service of the block IO protocol. |
| 120 | * |
| 121 | * @this block IO protocol |
| 122 | * @return status code |
| 123 | */ |
| 124 | static efi_status_t EFIAPI flush_blocks(struct efi_block_io *this) |
| 125 | { |
| 126 | return EFI_SUCCESS; |
| 127 | } |
| 128 | |
| 129 | /* |
| 130 | * Decompress the disk image. |
| 131 | * |
| 132 | * @image decompressed disk image |
| 133 | * @return status code |
| 134 | */ |
| 135 | static efi_status_t decompress(u8 **image) |
| 136 | { |
| 137 | u8 *buf; |
| 138 | size_t i; |
| 139 | size_t addr; |
| 140 | size_t len; |
| 141 | efi_status_t ret; |
| 142 | |
| 143 | ret = boottime->allocate_pool(EFI_LOADER_DATA, img.length, |
| 144 | (void **)&buf); |
| 145 | if (ret != EFI_SUCCESS) { |
| 146 | efi_st_error("Out of memory\n"); |
| 147 | return ret; |
| 148 | } |
| 149 | boottime->set_mem(buf, img.length, 0); |
| 150 | |
| 151 | for (i = 0; ; ++i) { |
| 152 | if (!img.lines[i].line) |
| 153 | break; |
| 154 | addr = img.lines[i].addr; |
| 155 | len = COMPRESSED_DISK_IMAGE_BLOCK_SIZE; |
| 156 | if (addr + len > img.length) |
| 157 | len = img.length - addr; |
| 158 | boottime->copy_mem(buf + addr, img.lines[i].line, len); |
| 159 | } |
| 160 | *image = buf; |
| 161 | return ret; |
| 162 | } |
| 163 | |
| 164 | static struct efi_block_io_media media; |
| 165 | |
| 166 | static struct efi_block_io block_io = { |
| 167 | .media = &media, |
| 168 | .reset = reset, |
| 169 | .read_blocks = read_blocks, |
| 170 | .write_blocks = write_blocks, |
| 171 | .flush_blocks = flush_blocks, |
| 172 | }; |
| 173 | |
| 174 | /* Handle for the block IO device */ |
| 175 | static efi_handle_t disk_handle; |
| 176 | |
| 177 | /* |
| 178 | * Setup unit test. |
| 179 | * |
| 180 | * @handle: handle of the loaded image |
| 181 | * @systable: system table |
| 182 | * @return: EFI_ST_SUCCESS for success |
| 183 | */ |
| 184 | static int setup(const efi_handle_t handle, |
| 185 | const struct efi_system_table *systable) |
| 186 | { |
| 187 | efi_status_t ret; |
| 188 | struct efi_device_path_vendor vendor_node; |
| 189 | struct efi_device_path end_node; |
| 190 | |
| 191 | boottime = systable->boottime; |
| 192 | |
| 193 | decompress(&image); |
| 194 | |
| 195 | block_io.media->block_size = 1 << LB_BLOCK_SIZE; |
| 196 | block_io.media->last_block = img.length >> LB_BLOCK_SIZE; |
| 197 | |
| 198 | ret = boottime->install_protocol_interface( |
| 199 | &disk_handle, &block_io_protocol_guid, |
| 200 | EFI_NATIVE_INTERFACE, &block_io); |
| 201 | if (ret != EFI_SUCCESS) { |
| 202 | efi_st_error("Failed to install block I/O protocol\n"); |
| 203 | return EFI_ST_FAILURE; |
| 204 | } |
| 205 | |
| 206 | ret = boottime->allocate_pool(EFI_LOADER_DATA, |
| 207 | sizeof(struct efi_device_path_vendor) + |
| 208 | sizeof(struct efi_device_path), |
| 209 | (void **)&dp); |
| 210 | if (ret != EFI_SUCCESS) { |
| 211 | efi_st_error("Out of memory\n"); |
| 212 | return EFI_ST_FAILURE; |
| 213 | } |
| 214 | vendor_node.dp.type = DEVICE_PATH_TYPE_HARDWARE_DEVICE; |
| 215 | vendor_node.dp.sub_type = DEVICE_PATH_SUB_TYPE_VENDOR; |
| 216 | vendor_node.dp.length = sizeof(struct efi_device_path_vendor); |
| 217 | |
| 218 | boottime->copy_mem(&vendor_node.guid, &guid_vendor, |
| 219 | sizeof(efi_guid_t)); |
| 220 | boottime->copy_mem(dp, &vendor_node, |
| 221 | sizeof(struct efi_device_path_vendor)); |
| 222 | end_node.type = DEVICE_PATH_TYPE_END; |
| 223 | end_node.sub_type = DEVICE_PATH_SUB_TYPE_END; |
| 224 | end_node.length = sizeof(struct efi_device_path); |
| 225 | |
| 226 | boottime->copy_mem((char *)dp + sizeof(struct efi_device_path_vendor), |
| 227 | &end_node, sizeof(struct efi_device_path)); |
| 228 | ret = boottime->install_protocol_interface(&disk_handle, |
| 229 | &guid_device_path, |
| 230 | EFI_NATIVE_INTERFACE, |
| 231 | dp); |
| 232 | if (ret != EFI_SUCCESS) { |
| 233 | efi_st_error("InstallProtocolInterface failed\n"); |
| 234 | return EFI_ST_FAILURE; |
| 235 | } |
| 236 | return EFI_ST_SUCCESS; |
| 237 | } |
| 238 | |
| 239 | /* |
| 240 | * Tear down unit test. |
| 241 | * |
| 242 | * @return: EFI_ST_SUCCESS for success |
| 243 | */ |
| 244 | static int teardown(void) |
| 245 | { |
| 246 | efi_status_t r = EFI_ST_SUCCESS; |
| 247 | |
| 248 | if (disk_handle) { |
| 249 | r = boottime->uninstall_protocol_interface(disk_handle, |
| 250 | &guid_device_path, |
| 251 | dp); |
| 252 | if (r != EFI_SUCCESS) { |
| 253 | efi_st_error("Uninstall device path failed\n"); |
| 254 | return EFI_ST_FAILURE; |
| 255 | } |
| 256 | r = boottime->uninstall_protocol_interface( |
| 257 | disk_handle, &block_io_protocol_guid, |
| 258 | &block_io); |
| 259 | if (r != EFI_SUCCESS) { |
| 260 | efi_st_todo( |
| 261 | "Failed to uninstall block I/O protocol\n"); |
| 262 | return EFI_ST_SUCCESS; |
| 263 | } |
| 264 | } |
| 265 | |
| 266 | if (image) { |
| 267 | r = efi_free_pool(image); |
| 268 | if (r != EFI_SUCCESS) { |
| 269 | efi_st_error("Failed to free image\n"); |
| 270 | return EFI_ST_FAILURE; |
| 271 | } |
| 272 | } |
| 273 | return r; |
| 274 | } |
| 275 | |
| 276 | /* |
| 277 | * Get length of device path without end tag. |
| 278 | * |
| 279 | * @dp device path |
| 280 | * @return length of device path in bytes |
| 281 | */ |
| 282 | static efi_uintn_t dp_size(struct efi_device_path *dp) |
| 283 | { |
| 284 | struct efi_device_path *pos = dp; |
| 285 | |
| 286 | while (pos->type != DEVICE_PATH_TYPE_END) |
| 287 | pos = (struct efi_device_path *)((char *)pos + pos->length); |
| 288 | return (char *)pos - (char *)dp; |
| 289 | } |
| 290 | |
| 291 | /* |
| 292 | * Execute unit test. |
| 293 | * |
| 294 | * @return: EFI_ST_SUCCESS for success |
| 295 | */ |
| 296 | static int execute(void) |
| 297 | { |
| 298 | efi_status_t ret; |
| 299 | efi_uintn_t no_handles, i, len; |
| 300 | efi_handle_t *handles; |
| 301 | efi_handle_t handle_partition = NULL; |
| 302 | struct efi_device_path *dp_partition; |
| 303 | struct efi_simple_file_system_protocol *file_system; |
| 304 | struct efi_file_handle *root, *file; |
| 305 | u64 buf_size; |
| 306 | char buf[16] __aligned(ARCH_DMA_MINALIGN); |
| 307 | |
| 308 | ret = boottime->connect_controller(disk_handle, NULL, NULL, 1); |
| 309 | if (ret != EFI_SUCCESS) { |
| 310 | efi_st_error("Failed to connect controller\n"); |
| 311 | return EFI_ST_FAILURE; |
| 312 | } |
| 313 | ret = boottime->locate_handle_buffer( |
| 314 | BY_PROTOCOL, &guid_device_path, NULL, |
| 315 | &no_handles, &handles); |
| 316 | if (ret != EFI_SUCCESS) { |
| 317 | efi_st_error("Failed to locate handles\n"); |
| 318 | return EFI_ST_FAILURE; |
| 319 | } |
| 320 | len = dp_size(dp); |
| 321 | for (i = 0; i < no_handles; ++i) { |
| 322 | ret = boottime->open_protocol(handles[i], &guid_device_path, |
| 323 | (void **)&dp_partition, |
| 324 | NULL, NULL, |
| 325 | EFI_OPEN_PROTOCOL_GET_PROTOCOL); |
| 326 | if (ret != EFI_SUCCESS) { |
| 327 | efi_st_error("Failed to open device path protocol\n"); |
| 328 | return EFI_ST_FAILURE; |
| 329 | } |
| 330 | if (len >= dp_size(dp_partition)) |
| 331 | continue; |
| 332 | if (efi_st_memcmp(dp, dp_partition, len)) |
| 333 | continue; |
| 334 | handle_partition = handles[i]; |
| 335 | break; |
| 336 | } |
| 337 | ret = boottime->free_pool(handles); |
| 338 | if (ret != EFI_SUCCESS) { |
| 339 | efi_st_error("Failed to free pool memory\n"); |
| 340 | return EFI_ST_FAILURE; |
| 341 | } |
| 342 | if (!handle_partition) { |
| 343 | efi_st_error("Partition handle not found\n"); |
| 344 | return EFI_ST_FAILURE; |
| 345 | } |
| 346 | ret = boottime->open_protocol(handle_partition, |
| 347 | &guid_simple_file_system_protocol, |
| 348 | (void **)&file_system, NULL, NULL, |
| 349 | EFI_OPEN_PROTOCOL_GET_PROTOCOL); |
| 350 | if (ret != EFI_SUCCESS) { |
| 351 | efi_st_error("Failed to open simple file system protocol\n"); |
| 352 | return EFI_ST_FAILURE; |
| 353 | } |
| 354 | ret = file_system->open_volume(file_system, &root); |
| 355 | if (ret != EFI_SUCCESS) { |
| 356 | efi_st_error("Failed to open volume\n"); |
| 357 | return EFI_ST_FAILURE; |
| 358 | } |
| 359 | ret = root->open(root, &file, (s16 *)L"hello.txt", EFI_FILE_MODE_READ, |
| 360 | 0); |
| 361 | if (ret != EFI_SUCCESS) { |
| 362 | efi_st_error("Failed to open file\n"); |
| 363 | return EFI_ST_FAILURE; |
| 364 | } |
| 365 | buf_size = sizeof(buf) - 1; |
| 366 | ret = file->read(file, &buf_size, buf); |
| 367 | if (ret != EFI_SUCCESS) { |
| 368 | efi_st_error("Failed to read file\n"); |
| 369 | return EFI_ST_FAILURE; |
| 370 | } |
| 371 | if (efi_st_memcmp(buf, "Hello world!", 12)) { |
| 372 | efi_st_error("Unexpected file content\n"); |
| 373 | return EFI_ST_FAILURE; |
| 374 | } |
| 375 | ret = file->close(file); |
| 376 | if (ret != EFI_SUCCESS) { |
| 377 | efi_st_error("Failed to close file\n"); |
| 378 | return EFI_ST_FAILURE; |
| 379 | } |
| 380 | ret = root->close(root); |
| 381 | if (ret != EFI_SUCCESS) { |
| 382 | efi_st_error("Failed to close volume\n"); |
| 383 | return EFI_ST_FAILURE; |
| 384 | } |
| 385 | |
| 386 | return EFI_ST_SUCCESS; |
| 387 | } |
| 388 | |
| 389 | EFI_UNIT_TEST(blkdev) = { |
| 390 | .name = "block device", |
| 391 | .phase = EFI_EXECUTE_BEFORE_BOOTTIME_EXIT, |
| 392 | .setup = setup, |
| 393 | .execute = execute, |
| 394 | .teardown = teardown, |
| 395 | }; |