Stefan Roese | ede2c66 | 2021-04-07 09:12:38 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Marvell / Cavium Inc. NIC23 |
| 4 | */ |
| 5 | |
| 6 | /dts-v1/; |
| 7 | |
| 8 | #include "mrvl,cn73xx.dtsi" |
| 9 | #include <dt-bindings/gpio/gpio.h> |
| 10 | |
| 11 | / { |
| 12 | model = "cavium,nic23"; |
| 13 | compatible = "cavium,nic23"; |
| 14 | |
| 15 | aliases { |
| 16 | mmc0 = &mmc0; |
| 17 | serial0 = &uart0; |
| 18 | spi0 = &spi; |
| 19 | }; |
| 20 | |
| 21 | regulators { |
| 22 | compatible = "simple-bus"; |
| 23 | #address-cells = <1>; |
| 24 | #size-cells = <0>; |
| 25 | |
| 26 | /* Power on GPIO 8, active high */ |
| 27 | reg_mmc_3v3: regulator@0 { |
| 28 | compatible = "regulator-fixed"; |
| 29 | reg = <0>; |
| 30 | regulator-name = "mmc-3v3"; |
| 31 | regulator-min-microvolt = <3300000>; |
| 32 | regulator-max-microvolt = <3300000>; |
| 33 | gpio = <&gpio 8 GPIO_ACTIVE_HIGH>; |
| 34 | enable-active-high; |
| 35 | }; |
| 36 | }; |
| 37 | |
| 38 | chosen { |
| 39 | stdout-path = &uart0; |
| 40 | }; |
| 41 | }; |
| 42 | |
| 43 | &bootbus { |
| 44 | /* |
| 45 | * bootbus CS0 for CFI flash is remapped (0x1fc0.0000 -> 1f40.0000) |
| 46 | * as the initial size is too small for the 8MiB flash device |
| 47 | */ |
| 48 | ranges = <0 0 0 0x1f400000 0xc00000>, |
| 49 | <1 0 0x10000 0x10000000 0>, |
| 50 | <2 0 0x10000 0x20000000 0>, |
| 51 | <3 0 0x10000 0x30000000 0>, |
| 52 | <4 0 0 0x1d020000 0x10000>, |
| 53 | <5 0 0x10000 0x50000000 0>, |
| 54 | <6 0 0x10000 0x60000000 0>, |
| 55 | <7 0 0x10000 0x70000000 0>; |
| 56 | |
| 57 | cavium,cs-config@0 { |
| 58 | compatible = "cavium,octeon-3860-bootbus-config"; |
| 59 | cavium,cs-index = <0>; |
| 60 | cavium,t-adr = <10>; |
| 61 | cavium,t-ce = <50>; |
| 62 | cavium,t-oe = <50>; |
| 63 | cavium,t-we = <35>; |
| 64 | cavium,t-rd-hld = <25>; |
| 65 | cavium,t-wr-hld = <35>; |
| 66 | cavium,t-pause = <0>; |
| 67 | cavium,t-wait = <50>; |
| 68 | cavium,t-page = <30>; |
| 69 | cavium,t-rd-dly = <0>; |
| 70 | cavium,page-mode = <1>; |
| 71 | cavium,pages = <8>; |
| 72 | cavium,bus-width = <8>; |
| 73 | }; |
| 74 | |
| 75 | cavium,cs-config@4 { |
| 76 | compatible = "cavium,octeon-3860-bootbus-config"; |
| 77 | cavium,cs-index = <4>; |
| 78 | cavium,t-adr = <10>; |
| 79 | cavium,t-ce = <10>; |
| 80 | cavium,t-oe = <160>; |
| 81 | cavium,t-we = <100>; |
| 82 | cavium,t-rd-hld = <10>; |
| 83 | cavium,t-wr-hld = <0>; |
| 84 | cavium,t-pause = <50>; |
| 85 | cavium,t-wait = <50>; |
| 86 | cavium,t-page = <10>; |
| 87 | cavium,t-rd-dly = <10>; |
| 88 | cavium,pages = <0>; |
| 89 | cavium,bus-width = <8>; |
| 90 | }; |
| 91 | |
| 92 | flash0: nor@0,0 { |
| 93 | compatible = "cfi-flash"; |
| 94 | reg = <0 0 0x800000>; |
| 95 | #address-cells = <1>; |
| 96 | #size-cells = <1>; |
| 97 | partition@0 { |
| 98 | label = "bootloader"; |
| 99 | reg = <0 0x340000>; |
| 100 | read-only; |
| 101 | }; |
| 102 | partition@300000 { |
| 103 | label = "storage"; |
| 104 | reg = <0x340000 0x4be000>; |
| 105 | }; |
| 106 | partition@7fe000 { |
| 107 | label = "environment"; |
| 108 | reg = <0x7fe000 0x2000>; |
| 109 | read-only; |
| 110 | }; |
| 111 | }; |
| 112 | }; |
| 113 | |
| 114 | &uart0 { |
| 115 | clock-frequency = <800000000>; |
| 116 | }; |
| 117 | |
| 118 | &i2c0 { |
| 119 | u-boot,dm-pre-reloc; /* Needed early for DDR SPD EEPROM */ |
| 120 | clock-frequency = <100000>; |
| 121 | }; |
| 122 | |
| 123 | &i2c1 { |
| 124 | u-boot,dm-pre-reloc; /* Needed early for DDR SPD EEPROM */ |
| 125 | clock-frequency = <100000>; |
| 126 | }; |
| 127 | |
| 128 | &mmc { |
| 129 | status = "okay"; |
| 130 | |
| 131 | mmc0: mmc-slot@0 { |
| 132 | compatible = "cavium,octeon-6130-mmc-slot", "mmc-slot"; |
| 133 | reg = <0>; |
| 134 | vqmmc-supply = <®_mmc_3v3>; |
| 135 | voltage-ranges = <3300 3300>; |
| 136 | spi-max-frequency = <52000000>; |
| 137 | /* bus width can be 1, 4 or 8 */ |
| 138 | bus-width = <8>; /* new std property */ |
| 139 | cavium,bus-max-width = <8>; /* custom property */ |
| 140 | non-removable; |
| 141 | }; |
| 142 | }; |
| 143 | |
| 144 | &soc0 { |
| 145 | pci-console@0 { |
| 146 | compatible = "marvell,pci-console"; |
| 147 | status = "okay"; |
| 148 | }; |
| 149 | |
| 150 | pci-bootcmd@0 { |
| 151 | compatible = "marvell,pci-bootcmd"; |
| 152 | status = "okay"; |
| 153 | }; |
| 154 | }; |
| 155 | |
| 156 | &spi { |
| 157 | flash@0 { |
| 158 | compatible = "micron,n25q128a11", "jedec,spi-nor"; |
| 159 | spi-max-frequency = <2000000>; |
| 160 | reg = <0>; |
| 161 | }; |
| 162 | }; |