| wdenk | 433feff | 2004-01-29 09:22:58 +0000 | [diff] [blame^] | 1 | The current implementation allows the user to specify the desired CPU |
| 2 | clock value, in MHz, via an environment variable "cpuclk". |
| 3 | |
| 4 | Three compile-time constants are used: |
| 5 | |
| 6 | CFG_866_OSCCLK - input quartz clock |
| 7 | CFG_866_CPUCLK_MIN - minimum allowed CPU clock |
| 8 | CFG_866_CPUCLK_MAX - maximum allowed CPU clock |
| 9 | CFG_866_CPUCLK_DEFAULT - default CPU clock value |
| 10 | |
| 11 | If the "cpuclk" environment variable value is within the CPUCLK_MIN / |
| 12 | CPUCLK_MAX limits, the specified value is used. Otherwise, the |
| 13 | default CPU clock value is set. |
| 14 | |
| 15 | Please note that for now the new clock-handling code has been enabled |
| 16 | for the TQM866M board only, even though it should be pretty much |
| 17 | common for other MPC859 / MPC866 based boards also. Our intention |
| 18 | here was to move in small steps and not to break the existing code |
| 19 | for other boards. |