blob: 2ed178f16a7822e2bc61b41823364c714aef1c55 [file] [log] [blame]
Tom Rini53633a82024-02-29 12:33:36 -05001# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/usb/generic-ehci.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: USB EHCI Controller
8
9maintainers:
10 - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11
12allOf:
13 - $ref: usb-hcd.yaml
14 - if:
15 properties:
16 compatible:
17 not:
18 contains:
19 const: ibm,usb-ehci-440epx
20 then:
21 properties:
22 reg:
23 maxItems: 1
24
25properties:
26 compatible:
27 oneOf:
28 - items:
29 - enum:
30 - allwinner,sun4i-a10-ehci
31 - allwinner,sun50i-a64-ehci
32 - allwinner,sun50i-h6-ehci
33 - allwinner,sun50i-h616-ehci
34 - allwinner,sun5i-a13-ehci
35 - allwinner,sun6i-a31-ehci
36 - allwinner,sun7i-a20-ehci
37 - allwinner,sun8i-a23-ehci
38 - allwinner,sun8i-a83t-ehci
39 - allwinner,sun8i-h3-ehci
40 - allwinner,sun8i-r40-ehci
41 - allwinner,sun8i-v3s-ehci
42 - allwinner,sun9i-a80-ehci
43 - allwinner,sun20i-d1-ehci
44 - aspeed,ast2400-ehci
45 - aspeed,ast2500-ehci
46 - aspeed,ast2600-ehci
47 - brcm,bcm3384-ehci
48 - brcm,bcm63268-ehci
49 - brcm,bcm6328-ehci
50 - brcm,bcm6358-ehci
51 - brcm,bcm6362-ehci
52 - brcm,bcm6368-ehci
53 - brcm,bcm7125-ehci
54 - brcm,bcm7346-ehci
55 - brcm,bcm7358-ehci
56 - brcm,bcm7360-ehci
57 - brcm,bcm7362-ehci
58 - brcm,bcm7420-ehci
59 - brcm,bcm7425-ehci
60 - brcm,bcm7435-ehci
61 - hpe,gxp-ehci
62 - ibm,476gtr-ehci
63 - nxp,lpc1850-ehci
64 - qca,ar7100-ehci
65 - rockchip,rk3588-ehci
66 - snps,hsdk-v1.0-ehci
67 - socionext,uniphier-ehci
68 - const: generic-ehci
69 - items:
70 - enum:
71 - atmel,at91sam9g45-ehci
72 - cavium,octeon-6335-ehci
73 - ibm,usb-ehci-440epx
74 - ibm,usb-ehci-460ex
75 - nintendo,hollywood-usb-ehci
76 - st,spear600-ehci
77 - const: usb-ehci
78 - enum:
79 - generic-ehci
Tom Rini6bb92fc2024-05-20 09:54:58 -060080 - marvell,ac5-ehci
Tom Rini53633a82024-02-29 12:33:36 -050081 - marvell,armada-3700-ehci
82 - marvell,orion-ehci
83 - nuvoton,npcm750-ehci
84 - nuvoton,npcm845-ehci
85 - ti,ehci-omap
86 - usb-ehci
87
88 reg:
89 minItems: 1
90 maxItems: 2
91
92 interrupts:
93 maxItems: 1
94
95 resets:
96 minItems: 1
97 maxItems: 4
98
99 clocks:
100 minItems: 1
101 maxItems: 4
102 description: |
103 In case the Renesas R-Car Gen3 SoCs:
104 - if a host only channel: first clock should be host.
105 - if a USB DRD channel: first clock should be host and second
106 one should be peripheral
107
108 power-domains:
109 maxItems: 1
110
111 big-endian:
112 $ref: /schemas/types.yaml#/definitions/flag
113 description:
114 Set this flag for HCDs with big endian descriptors and big
115 endian registers.
116
117 big-endian-desc:
118 $ref: /schemas/types.yaml#/definitions/flag
119 description:
120 Set this flag for HCDs with big endian descriptors.
121
122 big-endian-regs:
123 $ref: /schemas/types.yaml#/definitions/flag
124 description:
125 Set this flag for HCDs with big endian registers.
126
127 has-transaction-translator:
128 $ref: /schemas/types.yaml#/definitions/flag
129 description:
130 Set this flag if EHCI has a Transaction Translator built into
131 the root hub.
132
133 needs-reset-on-resume:
134 $ref: /schemas/types.yaml#/definitions/flag
135 description:
136 Set this flag to force EHCI reset after resume.
137
138 spurious-oc:
139 $ref: /schemas/types.yaml#/definitions/flag
140 description:
141 Set this flag to indicate that the hardware sometimes turns on
142 the OC bit when an over-current isn't actually present.
143
144 phys:
145 minItems: 1
146 maxItems: 3
147
148 phy-names:
149 const: usb
150
151 iommus:
152 maxItems: 1
153
154 dr_mode:
155 enum:
156 - host
157 - otg
158
159required:
160 - compatible
161 - reg
162 - interrupts
163
164unevaluatedProperties: false
165
166examples:
167 - |
168 usb@e0000300 {
169 compatible = "ibm,usb-ehci-440epx", "usb-ehci";
170 interrupt-parent = <&UIC0>;
171 interrupts = <0x1a 4>;
172 reg = <0xe0000300 90>, <0xe0000390 70>;
173 big-endian;
174 };
175
176 - |
177 ehci0: usb@1c14000 {
178 compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
179 reg = <0x01c14000 0x100>;
180 interrupts = <39>;
181 clocks = <&ahb_gates 1>;
182 phys = <&usbphy 1>;
183 phy-names = "usb";
184 };
185
186...