Tom Rini | 6bb92fc | 2024-05-20 09:54:58 -0600 | [diff] [blame] | 1 | # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| 2 | %YAML 1.2 |
| 3 | --- |
| 4 | $id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml# |
| 5 | $schema: http://devicetree.org/meta-schemas/core.yaml# |
| 6 | |
| 7 | title: Qualcomm SA8775p PCI Express Root Complex |
| 8 | |
| 9 | maintainers: |
| 10 | - Bjorn Andersson <andersson@kernel.org> |
| 11 | - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> |
| 12 | |
| 13 | description: |
| 14 | Qualcomm SA8775p SoC PCIe root complex controller is based on the Synopsys |
| 15 | DesignWare PCIe IP. |
| 16 | |
| 17 | properties: |
| 18 | compatible: |
| 19 | const: qcom,pcie-sa8775p |
| 20 | |
| 21 | reg: |
| 22 | minItems: 6 |
| 23 | maxItems: 6 |
| 24 | |
| 25 | reg-names: |
| 26 | items: |
| 27 | - const: parf # Qualcomm specific registers |
| 28 | - const: dbi # DesignWare PCIe registers |
| 29 | - const: elbi # External local bus interface registers |
| 30 | - const: atu # ATU address space |
| 31 | - const: config # PCIe configuration space |
| 32 | - const: mhi # MHI registers |
| 33 | |
| 34 | clocks: |
| 35 | minItems: 5 |
| 36 | maxItems: 5 |
| 37 | |
| 38 | clock-names: |
| 39 | items: |
| 40 | - const: aux # Auxiliary clock |
| 41 | - const: cfg # Configuration clock |
| 42 | - const: bus_master # Master AXI clock |
| 43 | - const: bus_slave # Slave AXI clock |
| 44 | - const: slave_q2a # Slave Q2A clock |
| 45 | |
| 46 | interrupts: |
| 47 | minItems: 8 |
| 48 | maxItems: 8 |
| 49 | |
| 50 | interrupt-names: |
| 51 | items: |
| 52 | - const: msi0 |
| 53 | - const: msi1 |
| 54 | - const: msi2 |
| 55 | - const: msi3 |
| 56 | - const: msi4 |
| 57 | - const: msi5 |
| 58 | - const: msi6 |
| 59 | - const: msi7 |
| 60 | |
| 61 | resets: |
| 62 | maxItems: 1 |
| 63 | |
| 64 | reset-names: |
| 65 | items: |
| 66 | - const: pci |
| 67 | |
| 68 | required: |
| 69 | - interconnects |
| 70 | - interconnect-names |
| 71 | |
| 72 | allOf: |
| 73 | - $ref: qcom,pcie-common.yaml# |
| 74 | |
| 75 | unevaluatedProperties: false |
| 76 | |
| 77 | examples: |
| 78 | - | |
| 79 | #include <dt-bindings/clock/qcom,sa8775p-gcc.h> |
| 80 | #include <dt-bindings/clock/qcom,rpmh.h> |
| 81 | #include <dt-bindings/gpio/gpio.h> |
| 82 | #include <dt-bindings/interrupt-controller/arm-gic.h> |
| 83 | #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h> |
| 84 | |
| 85 | soc { |
| 86 | #address-cells = <2>; |
| 87 | #size-cells = <2>; |
| 88 | |
| 89 | pcie@1c00000 { |
| 90 | compatible = "qcom,pcie-sa8775p"; |
| 91 | reg = <0x0 0x01c00000 0x0 0x3000>, |
| 92 | <0x0 0x40000000 0x0 0xf20>, |
| 93 | <0x0 0x40000f20 0x0 0xa8>, |
| 94 | <0x0 0x40001000 0x0 0x4000>, |
| 95 | <0x0 0x40100000 0x0 0x100000>, |
| 96 | <0x0 0x01c03000 0x0 0x1000>; |
| 97 | reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; |
| 98 | ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, |
| 99 | <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; |
| 100 | |
| 101 | bus-range = <0x00 0xff>; |
| 102 | device_type = "pci"; |
| 103 | linux,pci-domain = <0>; |
| 104 | num-lanes = <2>; |
| 105 | |
| 106 | #address-cells = <3>; |
| 107 | #size-cells = <2>; |
| 108 | |
| 109 | assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>; |
| 110 | assigned-clock-rates = <19200000>; |
| 111 | |
| 112 | clocks = <&gcc GCC_PCIE_0_AUX_CLK>, |
| 113 | <&gcc GCC_PCIE_0_CFG_AHB_CLK>, |
| 114 | <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, |
| 115 | <&gcc GCC_PCIE_0_SLV_AXI_CLK>, |
| 116 | <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; |
| 117 | clock-names = "aux", |
| 118 | "cfg", |
| 119 | "bus_master", |
| 120 | "bus_slave", |
| 121 | "slave_q2a"; |
| 122 | |
| 123 | dma-coherent; |
| 124 | |
| 125 | interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, |
| 126 | <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, |
| 127 | <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, |
| 128 | <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, |
| 129 | <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, |
| 130 | <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, |
| 131 | <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, |
| 132 | <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; |
| 133 | interrupt-names = "msi0", |
| 134 | "msi1", |
| 135 | "msi2", |
| 136 | "msi3", |
| 137 | "msi4", |
| 138 | "msi5", |
| 139 | "msi6", |
| 140 | "msi7"; |
| 141 | #interrupt-cells = <1>; |
| 142 | interrupt-map-mask = <0 0 0 0x7>; |
| 143 | interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, |
| 144 | <0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, |
| 145 | <0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, |
| 146 | <0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; |
| 147 | |
| 148 | interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>, |
| 149 | <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>; |
| 150 | interconnect-names = "pcie-mem", "cpu-pcie"; |
| 151 | |
| 152 | iommu-map = <0x0 &pcie_smmu 0x0000 0x1>, |
| 153 | <0x100 &pcie_smmu 0x0001 0x1>; |
| 154 | |
| 155 | phys = <&pcie0_phy>; |
| 156 | phy-names = "pciephy"; |
| 157 | |
| 158 | power-domains = <&gcc PCIE_0_GDSC>; |
| 159 | |
| 160 | resets = <&gcc GCC_PCIE_0_BCR>; |
| 161 | reset-names = "pci"; |
| 162 | |
| 163 | perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; |
| 164 | wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; |
| 165 | }; |
| 166 | }; |