| Tom Rini | 53633a8 | 2024-02-29 12:33:36 -0500 | [diff] [blame] | 1 | Sitronix ST7586 display panel |
| 2 | |
| 3 | Required properties: |
| 4 | - compatible: "lego,ev3-lcd". |
| 5 | - a0-gpios: The A0 signal (since this binding is for serial mode, this is |
| 6 | the pin labeled D1 on the controller, not the pin labeled A0) |
| 7 | - reset-gpios: Reset pin |
| 8 | |
| 9 | The node for this driver must be a child node of a SPI controller, hence |
| 10 | all mandatory properties described in ../spi/spi-bus.txt must be specified. |
| 11 | |
| 12 | Optional properties: |
| 13 | - rotation: panel rotation in degrees counter clockwise (0,90,180,270) |
| 14 | |
| 15 | Example: |
| 16 | display@0{ |
| 17 | compatible = "lego,ev3-lcd"; |
| 18 | reg = <0>; |
| 19 | spi-max-frequency = <10000000>; |
| 20 | a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; |
| 21 | reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; |
| 22 | }; |